Kleinn Air Horns 318 Detonator with Red Push Button

Interrupteur de construction solide et fonctionne très bien.

Works perfect!

Stout little horn switch. The threads on the barrel, bezel nut, and backing nut are very fine and not all that deep as others have noted. Hopefully they will hold up to years of use. The rear contacts are brass with fine pitch screws to either attach crimp terminal connectors, or alternately place bare twisted wire inside the brass blocks (visible in the product image) and tighten down the clamping screws. The screws on the switch we received were properly tapped/threaded.The momentary switch works as follows, as the button is pushed, a phenolic separator that holds the internal copper contacts apart has a rivet contact on (mid point) it that (when button is depressed) is allowed to contact the copper contacts, thereby actuating the horn (or other attached device). when the horn button is allowed to return to its un-depressed position the copper contacts are again separated by the phenolic separator

It is big. You have to drill a 1” hole in your dash to mount it. But the screw terminals on the back provide very positive connections and the button operates well

Works GREAT!! Looks great on my switch post among the others. Easier to reach than the below dash switch I first had installed. Red "target" spot is easy to see and get to when needed. Would recommend and buy again.