Delta Faucet 75160-CZ, 1.63 x 1.50 x 3.50 inches, Champagne Bronze

I love the look of this Dryden collection and thought it would be the perfect complement to a light fixture I installed in my bathroom, since it came brushed and had that squareness to it.I decided to get the lever first before buying everything in the collection. I’ll get into the why momentarily.As for the handle itself. The lever is substantial and as beautiful in person as online. The internal parts are all plastic. This was my first time doing this diy project it took a little while to make all the little adjustments to get everything in position for a proper flush.The problem I thought I might have happened once I put the lid on. I have an American Standard toilet with the lever on the side. The lever opening is too high for the lever to move freely when flushing. Since the square area is a part of the handle, the pointed corners don’t clear the tank lid and they scrape against each other.If you have a tank with enough clearance between the lever and the lid for this to freely move, go for it. As for me, I’ll have to keep looking for one where the lever moves independently from the square base, or just give up on square altogether.

This "universal" tank lever wouldn't fit in my toilet tank, and I bet you'll have the same problem. Unlike 99% of such levers, where the long arm (that pulls up the flapper) is an inch or so inside the tank, this beast has an extension built in that places the long arm 2-3 inches inside the tank...right where my flush valve is. I literally had to cut off an inch of plastic and redrill the hole to which the arm attaches to get it to fit. I looked at every lever at several large hardware stores and none of them came close to extending this far into the tank. Avoid if possible.

This Delta tank lever is modern and very attractive, and closely matches our Moen design in the rest of the bathroom. Seems heavy duty as well. Our only issue is it doesn't always pop back up after pressing, but that may have something to do with the new flapper my husband installed.

This is sold as a "universal" fit replacement handle. It is NOT QUITE a universal fit for some tanks!But first, I will say that this is a beautifully finished tank lever, nothing short of what you would expect from a $40 toilet flush tank handle. So at that price it better be very well made, nicely finished, etc. It is.But back to the UNIVERSAL FIT claim. If you have a standard tank, then I think this probably will fit those without any issues.BUT if you have a PRESSURIZED tank that is inside your tank, then you better break out your tools, find some heavy corrosion proof wire or maybe even threaded rod, and break out your thinking cap because you will have to totally re-engineer the internal parts to get your tank to flush. In my case I had to cut away parts of the internal components, and then use some semi-bendable aluminum rod to make a catch system to engage the metal lever on my Sloan "powerflush" internal pressure tank.If you are NOT mechanically inclined AND you have a pressure assist toilet then this "universal" fit lever is probably not for you.I'd give it 5 stars if it was a true universal fit. Downgraded 1 star because its description is not accurate.

Just did my first handle replacement and was pleased with how easy this lever adjusted.The assemblage has two main areas that allow for most any angle to be set for the rod coming off the handle. This means it will work regardless of your handle needing the lever to be parallel or perpendicular to the lever attachment. It adjusts vertically and horizontally.It also has 7 notches along the arm for choosing the best place to attach your flapper valve chain to.(Note this doesn't come with a new clip for attaching the valve chain to the rod arm).Also- unlike the kits at my local hardware store, this one came with a rubber washer to fit against the tank. Granted, your tank water level will never get high enough to need a water tight fit, the rubber washer just helped get a snug fit against the tank.

Good solid feel and movement. A little patience with alignment and height gives the Good as new function and Better than Original appearance on a 1960's Jadite Toilet.. Very pleased with the Appearance and Function

Husband said it was tough to install. Flushes great now. Matches with the rest of the delta fixtures. Rose brass

I replaced all of my bathroom fixtures with Delta Dryden bronze. Love, Love, Love! It looks great and yes, this is one massive piece. The handle which came with the toilet was ok- kind of cheap and when you flushed the toilet, it felt as if it was going to break. When I replaced with the Dryden, you push the lever and know that it is a solid piece. When you press this handle down, you know you have a well made, solid piece that will not be breaking any time soon. Highly...highly recommend!

I bought 3 of these and the price was better than the local suppliers. I love the polished nickel. All of my faucets, towel bars and light fixtures are polished nickel. They seem of good quality and work fine.

We are happy with the faucets and accessories. Good quality and looks good.