2+2 Pack Screen Protector Designed for Samsung Galaxy S21 Ultra [Full Protection], 2 PCS Soft TPU Film + 2 PCS Camera Lens Protector, 100% Fingerprint Unlock, Bubble Free - 6.8 inch

This screen protector is a solid choice for keeping your phone protected without affecting usability. The TAURI TPU film is flexible and fits the Samsung Galaxy S22 Ultra well, covering the screen smoothly with good touch sensitivity. It’s easy to apply with minimal bubbles if you follow the instructions, and the clarity remains sharp for everyday use. While it may not feel as rigid as glass, it does a good job at preventing scratches and minor wear. Overall, great value—especially with the 2-pack included.

I am so impressed with this screen protector. If you follow the video instructions it fits perfectly and aligned to the phone. It is very clear and the camera protector is a bonus. Everything you need is in the box. I can't recommend enough

The screen protector itself is nothing special. Its a standard plastic film with a bit of a gel-like coating on the front (which gives it its healing properties). I found my nail marks do indeed disappear after a day but I doubt anything more substantial would heal as well. My main praise though is to do with the installation procedure. I've never installed a screen protector like the way they instruct you to, but I've never been more impressed. The guides are so simple to follow and the final product is a super clean installation with 0 (yes 0) bubbles. When installing the screen protector the dust sticker is your best friend; just before you apply the protector make sure to use the sticker to remove any dust particles to ensure they don't get trapped underneath (Doing this before each step is advisable as dust always seems to land on the screen). I haven't used the camera protectors as I've heard its a hassle to remove them, so for now at least I'll leave them alone. I gave it 4 stars because I'd rather have the option to get 3 screen protectors instead of 2 and ditch the camera protectors. This way it would at least get value points from me. No complaints other than that.

I am absolutely blown away by the TAURI 2+2 Pack Screen Protector for the Samsung Galaxy S21 Ultra! This kit provides the ultimate defense for my device while maintaining pristine clarity that showcases the phone's stunning display. The inclusion of 2 PCS of Soft TPU Film and 2 PCS of Camera Lens Protector ensures that every inch of my phone is shielded from scratches, smudges, and potential damage. The camera lens protectors even go the extra mile to safeguard my precious lenses, allowing me to capture Instagram-worthy shots without any worries. One of the standout features of this screen protector is its 100% Fingerprint Unlock capability. I was skeptical at first, but the unlock experience is seamless and responsive, just like using the phone without a protector. It's like magic - only better! And let's talk about installation - the Bubble-Free technology is a game-changer! Applying the screen protector was an absolute breeze, and I appreciate that I didn't have to deal with any frustrating air bubbles ruining the aesthetics of my phone. In terms of touch sensitivity, the TAURI protector has aced the test. I can confidently say that my interactions with the screen are as smooth as ever, without any lag or loss of responsiveness. All in all, the TAURI 2+2 Pack Screen Protector Designed for Samsung Galaxy S21 Ultra has exceeded my expectations in every way possible. It provides a level of protection that matches the phone's premium quality, ensuring that I can enjoy my device without any nagging fears of damage. If you want to keep your Galaxy S21 Ultra looking brand new while enjoying its incredible features, do yourself a favor and invest in this screen protector. You won't regret it! 📱✨ Your phone deserves the best, and TAURI delivers in spades! ✨📱

I bought several brands of the plastic TPU screen protectors for the Galaxy Ultra S21 at differing prices. All these different brands have exactly the same plastic screen protector but the rear camera lens which is tempered glass varies slightly as in some are black and some clear. The screen protector is relatively easy to apply without bubbles and is easy to align. The protector is the same size, same material and same instructions in all the brands I have seen and whilst it is described as completely covering the screen along with "case friendly" which means it covers the flat part of the screen and not the curved edges. In the Samsung Clear View case there is very little unprotected glass showing. It is possible to make a TPU protector that goes on to the curved edges as I have had these for the S7 Edge. The fingerprint sensor works fine although it sometimes tells me to press firmer on the screen. The S21 Ultra has a sensitivity setting for screen protectors. I prefer the plastic film TPU to the tempered glass as I find with curved screen edges (S7 edge experience) the tempered glass does not stay in perfect position for long as it is only stuck by the edges and ends up clicking as it moves against the screen on the curves. The camera protector is a totally different issue and varies between suppliers, I suggest that you do not use it. There are several problems with it: 1. Firstly it is too thick to use in one of the Samsung close fitting cases such as the Clear View or LED View, it pushes the phone up in the case so that the power and volume buttons do not align with the case buttons and do not work. The Samsung case holds the camera deep enough to protect the lenses. 2. It distorts the high resolution pictures, in reality only a coated lens should be outermost on this camera. 3. The glue is so strong it is extremely difficult to remove from the camera. The glass broke into pieces before it could be removed and I had to pick it from the camera bit by bit by fingernail to avoid marking the phone and lenses. Others have experienced this. Update: I was having some minor sensitivity problems and have found out why. The S21 Ultra (UK version) already has a factory fitted thin screen protector installed when it arrives which is very difficult for someone of my age to see and also a clear disposable protector (with a tab to remove it) on top of that. So once I installed the TAURI protector I had two protectors on the screen. I have taken the TAURI off without disturbing the original and was surprised how thick the TAURI was and how clear considering the thickness. I will use the other one from the TAURI pack once the factory fitted original needs replacement.

I was initially really pleased with how many items were in the box, and the the idea seemed like it would be a foolproof way to accurately and smoothly put on a screen protector, especially according to the tutorial video seen in amazon photos for this product. However sadly this was not the case when it came to actually doing it! Firstly the alcohol pads I was given were completely bone dry. And the dust stickers were way more sticky than anticipated to the point that once it attached to the screen, it was a struggle to peel it off 😅 When it came down to adding the screen protector, I placed the plastic holder in my UC port, secured it in place, and removed the side band, then used the cardboard given to smooth out the middle as shown in the video. However when I pulled back the top yellow sticky layer and tried to push up with the cardboard at the same time, there was a long bump, a ridge where the protector had got caught up, which just wouldn't smooth out. Tried to remove the bottom yellow sticky layer, but it went up higher than the line showed ot would, so I had to pull some of the screen protector off that I had already flattened out, but when trying to flatten the bottom, that area now had a long kink in it. So I decided to scrap it and peeled it all off. And tried again, as the box had 2 screen protectors in it. I thought this time would go better since I had a better understanding now of how to do it. But sadly it went almost exactly like the first time, the bottom and middle were smooth, but the top half did not peel away from the yellow sticky very well, and caused alot of bubbles. I tried peeling it back and tried to flatten it but its pretty much a one try thing, once you peel away once, it's done for, you can't reapply it anymore. Also the top didnt allign well with my front camera. Also the back lense protectors seem pointless and aren't great to attach either. I have issued a refund for this product.

I will add photos once I put the case back on the phone, but so far I can say it probably can't get better than this when it comes to TPU Film. Surface Feel: I feel like it's not even there. Brilliant Coverage: Precise margins, seem to be just over the actual display area, but plenty of space to the edges for a case(seemingly at least, will see when I put the case back on) Application: Easy, as with most other products of this type, but I suggest you take care how you apply pressure to the film during the process.. Be gentle and uniform since otherwise you might not get the result you want in terms of alignment (previous brands started to slide on the screen after some time and my suspicion is that aside of them being crap, I probably also applied some diagonal force when 'spreading' the protector on my screen) I will keep this comment up to date into the lifespan of this first protector that I applied today 31st October '24. Note: I have had massive issues with other protectors peeling off so I decided to leave the phone out of it's case for at least 24h after application. I will return with photos once the case is back and let you know if I got any peel at the edges. *** UPDATE*** 2 Weeks Later Photos now attached! Protector still holding.. HOWEVER.. It still peeled off a couple of times in the same usual spots.. HOWEVER.. Kudos to the glue, cause it was enough for me to just press it back (without removing the case) and it never peeled of again?!! :0 Sliding.. I have no idea why all the protectors I had on this phone ended up sliding to the right.. If the seller can shed some light on this it'd be great. You can see it slightly offset from the front camera. It was perfectly aligned when I put it on (don't have photo).. Case For anyone with the Sp***n case you see in the photos, I can definitely recommend this protector.

As someone who just bought the S22 Ultra, I was looking for a screen protector. I spent over an hour flicking through similar products, each product had some positive and some negative reviews - it was impossible to determine which was the best. I noticed on this product there was a lot of negativity towards this item, stating that it was rubbish, didn't stick, avoid at all costs etc. but took a risk due to it being a good price. Having bought this and had it on for a few days now, I'm happy to report that it's perfect. The protector itself is ever ever so slightly smaller than the screen, about 1-2mm, but I prefer this as it's less likely to deteriorate/peel during day to day use. My previous protector on my old phone was a bang on perfect fit, but after a short period of time, the corners picked up fluff and I ended up having to buy a new set of screens. Yes, these can be an absolute nightmare to install if you've never done it before but I had previous practice with my old phone protector, several times. I can tell this one will last me a long time which overall is more cost effective. But you do have to make sure you really ensure the phone is completely dust free and sterile to make this fit perfectly. I have no bubbles so I must have fitted it well, I wouldn't know I had a screen protector on if it wasn't for the U-shape gap for the front camera. Again, it does take practice and can be confusing if you've not fitted one before. My first ever time buying a screen protector, I got 3 in the box. I ended up messing up 2 and managed to get the final one on. 2 come with this bundle - for me now, I have a spare if this one ever needs replacing but for newcomers just make sure you follow the instructions exactly - just peel off the tabs in order and you can't go wrong. I don't think I've ever left a product review but felt that I need to provide you with some clarity. I'm appealing to the people who were in my shoes and are looking for a screen protector who are overwhelmed with all the other products and negative reviews If you can look past it being fiddly for your first time, 100% would reccomend this as legit and of high quality

Sí funciona para la huella dactilar pero es delgada la membrana

Very well thought out for ease of install! Super easy to get on. No bubbles! And no issues with a case. Would buy again

Item of no use to me want to return it

Like other reviews state, u do need to watch the video they provide to install it smoothly! With the curves edges of an S22 it can become a bit tricky, my first protector didnt want to detach itself properly from the film resulting in it stretching and being unusable, which honestly might have been my clumsyness. The second one in the package went on smoothIy it does take quit some time to take out most bubbles, and a small hair got stuck but still looking great. contacted Tocol about this (the broken one and the hair) and they immidiatley offered to send a new one. If u have somewhat of a decent case that protect the edges of ur curved screen u might have to push the protector into the edges of the case a bit for it not to come unstuck. Besides that, i have no complaints whatsoever, and my fingerprint scanner works just as great as before.

Meine vorige Folie war die originale von Samsung. Nun nach einem Jahr hat diese jedoch einige Kratzer und sieht nicht mehr gut aus. Daher war es Zeit für eine Neue. Ich war am Anfang etwas skeptisch bei diesem Produkt von TAURI.: - Verkäufer aus China - 10€ für 2 Folien - Eine seltsame Kombination von Schlagwörtern im Name Daher habe ich die 2100 Rating mit ~4.1 Sternen von ReviewMeta überprüfen lassen, und es stellt sich raus, dass keine Fake Reviews dabei sind. Ein Amazon Produkt ohne Fake Reviews! Dachte nicht, dass es die noch gibt. Folglich habe ich sie gleich bestellt zum ausprobieren. Der Inhalt ist ordentlich. Alkoholpads, Staubsticker und die Folie gibt es doppelt. Dazu gibt es noch ein Microfaserputztuch, ein stück Pappe zum Blasenentfernen und eine USB-C Folienhalterung. Die Folie hat eine nummerierte Struktur, damit man jeden Schritt in der richtigen Reihenfolge machen kann. Hat mich komplett überfordert. Daher, wie überall auf der Verpackung vermerkt, erstmal das Erklärungsvideo angeschaut. In diesem wird jeder Schritt vorgemacht, damit man ihn selbst gut nachmachen kann. Also, Handy geputzt, 1. Folie abgezogen, auf die USB-C Halterung gesteckt und dann auf das Display aufgesetzt. Staub. Es gab so viel Staub unter der Folie. Das gewählte Zimmer war vielleicht nicht die beste Wahl. Folie wieder entfernt, noch einmal Handy geputzt, wieder aufgetragen. Ein Haar. Folie wieder entfernt, Handy und Folie geputzt, wieder aufgetragen. Luftblasen. Versucht mit dem Stück Pappe die Luftblasen zu entfernen. Nach einer Weile habe ich aufgegeben und habe einfach weiter gemacht. Als nächstes musste ich die obere Folie entfernen und dann von unten mit dem Pappstück die Folie nach oben andrücken. Getan. Dann das gleiche von der anderen Seite. Zum Schluss den Rand andrücken und die obere Folie entfernen. Nach dem Staub und Haar Fiasko habe ich nicht mehr viel erwartet. Wie ich mich getäuscht habe. Ich weiß nicht wie oder warum, aber die Folie sitzt perfekt, ohne jegliche Luftblasen, Staub oder Haare darunter. Ich bin voll begeistern. Einzig der Rand ist nicht so gut wie bei der originalen Folie. Dort war er abgeflacht. Hier spürt man ihn mit dem Finger. Sonst habe ich absolut nichts zu beklagen. Sogar der Fingerabdrucksensor funktioniert zu 100% ohne dass ich ihn neu anlernen musste. Wirklich ein tolles Produkt!