Protect Your Tech, Elevate Your Style! 📲
The TOCOL 6 Pack offers comprehensive protection for your Samsung Galaxy S21 5G with three tempered glass screen protectors and three camera lens protectors. Engineered with 9H military-grade glass, it ensures maximum durability against drops and scratches while maintaining crystal-clear visibility and touch sensitivity. The included installation frame simplifies application, making it accessible for everyone. Plus, enjoy dedicated customer support for any inquiries or issues.
M**E
Wow. Glass screen protector that works with the fingerprint scanner.
Wow. Under $10. For a glass screen protector for the galaxy S21 and it works with the fingerprint scanner reasonable well. I followed the directions and cleaned my screen, and then placed the screen protector on it. Next, I changed the touch sensitivity to "on". Next, I tried out the existing fingerprints. They worked about 50% of the time, meaning I would have to press twice and the second the scanner would read my fingerprint. It worked even better the next day. Also, it work best if you fingers are not dry. I would recommend this product and will order again in the future.
D**X
Fingerprint reader works ...
I got the Tocol glass screen protector for a Samsung S21 along with a Beedle case. It was easy to apply to the screen with the installation frame. I had no bubbles nor dust after using the included cleaner and dust absorber ( a little sticky tape). It fit the screen well, but the corner curves did not match the Beedle case corners so bubbles appeared in the corners where the protector touched the case. I was able to remove just a sliver (0.25 mm) from each corner with a round file so they did not touch and the bubbles disappeared.After I had the screen and case on, I tried the fingerprint reader, but it didn't work. (My fingers were too clean and dry from the alcohol screen cleaner.) Following a web suggestion, I ran my finger on my forehead and nose to restore the natural oils and I was able to rescan the fingerprint and it has been working since without fail. If it fails in the future, as long as I have my nose with me, I think I'll be able to get it to work.When my finger was clean and dry, the scanning process started, but would not move off "0% complete". When oily, it took about 30 seconds to complete the multiple positions for each finger.
D**A
Pretty good....
Super easy to install buy or of my screen protectors was damaged. There is a dent or disformity on the sticky part and will not lay flat on my screen and there is a bubble.
B**A
They did not adhere as well as the others.
Item was not as sensitive to the touch as the other ones I had ordered, I t was like they did not adhere well to the phones screen.
K**.
Easy to install
I have purchased screen protectors from many different manufacturers. The Tocol brand is by far the easiest to install. With other screen protectors I usually waste one screen protector learning how to install them.I was able to install this screen protector the first time. I live that it has a plastic frame that helps you align the screen protector perfectly on the phone. I will only purchase the Tocol brand screen protectors in the future.
K**R
Excellent!
Watched video. went on perfect. Cannot even sense it is there. Do not use fingerprint so no comment. All else is very sensitive.
A**D
Does the job but not perfect.
I've done many of these screen protectors on many types of phones and this is the first one I wasn't fully satisfied with. The first issue I encountered was when I was peeling off the backing of the first screen protector to put it on the phone. The sticker that's in place to help you peel off the main clear sticker covering the whole protector peeled off, but the clear sticker stayed in place. I replaced the help sticker and had to fidget with it a bit to even get the clear sticker started to come off. The unnecessary fidgeting led to the introduction of one annoying piece of dust finding it's way onto the sticky side of the protector before I even had a chance to put it on. I put it on anyway to see how it looked. Despite having a plastic guide, the protector wasn't 100% straight. This probably won't bother most but it will forever drive me nuts. Plus that one piece of dust was aggravating so the whole first protector was removed. At least they're easy to remove and don't leave residue. The sticker on the second one peeled off normally and it went on without issues, despite being equally as off center as the first one. Not by much, but off center nonetheless. It went on easy, no dust this time, and the air bubbles were easy to remove. The fingerprint scanner did not work at first as expected but following the extra steps that are included in the packaging to redo your fingerprint and turn up the screen sensitivity made it work almost fully normally again. You might have to press ever so slightly harder than normal, but that is a minor cost to protect your glass screen on your $800 phone. The one thing that dissapoints me the most, aside from the first wasted protector which I guess was just a fluke issue, is that the protectors don't look big enough for the S21 screen. If you have an S21, unlock it and look at your screen. The entirely of your visual screen will be covered by this protector. But see the black edges around your screen? It's still the same piece of glass as your visual screen, but just a black outline to what's actually on the screen? The protector is NOT big enough to cover that. So even though the lit up part of your screen will be covered, there is still original glass exposed on all four sides. It's like the cover is only big enough to cover 97-98% of the screen and a glass edge is still visible all the way around it. Even with the added protection of a fairly bulky case in addition to this protector, there is still original glass exposed on the phone. And that's very annoying. The camera cover part doesn't have a guide or anything but was easy to put on using the same steps. Haven't noticed if it affects picture quality at all yet but we'll see. Overall a fine protector but could be better. I'm frustrated I lost the first protector to a fairly dumb issue that surely wasn't my fault. I had to fight to get the backing off, which defeats the purpose of the starter sticker. Never had that issue with any phone cover before. And frustrated the cover is just undersized enough that it doesn't cover all the glass of the original screen. Maybe this is fine if using an even bulkier case than the Razer branded one I bought, but if you're using no case at all, it'll look especially obvious and dumb. If you drop your phone and it hits on a corner, it won't be fully protected.
J**E
Saves phone when falling on the highway at 90mph
I'm writing this 20 minutes after it happens this morning, was on my way into work and i have a phone mount on my motorcycle and as i was cruising along, my phone goes flying out of it, spent like 5 minutes searching, freaked out and then found it on the other side of my stretch of highway, and it saved my phone 100% just the protector is road rashed
A**.
Simplest installation ever
Normally I get frustrated, get bubbles, and don't get it even. However, the use of the frame to get perfect precision installation was not only genius but took out a whole load of stress from the situation. The fingerprint scanner still works without even increases touch sensitivity on s21.
A**R
Fingerabdruck funktioniert! - WENN MAN VORHER DIE FOLIE WELCHE AM DISPLAY IST ENTFERNT HAT!
S21 hat von Haus aus eine Schutzfolie am Display!!! die muss man abnehmen - sonst funktioniert der Fingerabdrucksensor nicht! Wenn man einen kleinen Rand um die Kamera feststellt - dann ist diese Folie noch drauf!!! Abnehmen - dieses Panzerglas erst dann drauf und der Sensor funktioniert wie versprochen ; )...hab auch ein wenig gebraucht um das rauszufinden! Have Fun!
G**M
Check your phone before buying this!!
I have changed my review here, as there were circumstances of which I was unaware.I thought that fitting this protector was preventing my phone's fingerprint scanner from working - this was not the case. In the UK (not sure about anywhere else in the world) the S21 comes with a screen protector already fitted! Hence adding another on top would have the observed effect on the scanner.To check your phone for a factory fitted scanner, run the tip of your finger across the front facing camera on the main screen - if you can feel a ridge around it, you already have a screen protector fitted. Apologies to TOCOL, whose product, I imagine, is very good when you need to use it!!
L**A
Good
Good quality of product. Finger print works perfectly. Touch screen reacts fast and smoothly. Very easy to install
L**9
Fingerscanner Funktioniert nicht
Möglicherweise schützt es das Display gut. Leider funktioniert beim S21 der Fingerscanner nicht mehr wirklich! Trotz hoher Empfindlichkeit des Touchscreen, muss man fast das Display zerdrücken und selbst dann ist ein Erfolg selten.
Trustpilot
3 days ago
1 day ago