H4-3 9003 6000K Bi Xenon HI/LO HID Xenon Bulbs Bundle with 35W AC Slim Digital Ballast (Diamond White)

Light output is bright and throws far. I have been using the high end Sylvania, philips, osram, and hella bulbs for years and they are all great bulbs. In the last couple of years I started to run led in all my rigs. I skipped over the hid because I didn't have projector housings. The led lights are great, they are bright and use low wattage. Problem is the output varies greatly with the beam pattern from bulb to bulb. Which means you may need to try a few to get good lighting. Then the color no matter what has a blue tint. I tried a lot and have the purest white ones I could find and returned the rest. Now I decided to try the hid because one of my trucks had terrible beam pattern no matter which led bulb I used. I put in 35w ac 6000k 9006 bulbs and they are amazing. There is perfect beam pattern and the color has almost no blue and is perfect white. The throw on these is much farther than the led. The led looks brighter on wall or for close objects, but not for down road. The led were almost too bright for close objects, major glare to me. My biggest worry was the glare to other drivers. Actually the led are worse for oncoming glare. I had lights aimed perfect but still got flashed all the time, I never get flashed with the hid. I loved these so much that I put a set in another vehicle which had led. Now that has better lights. The only issue is start up time, you wouldn't want these as your brights or fogs. I still use led for my fogs(3000k) and brights(6000k). I have extremely bright high beams but no one else is around when those are on. The 3000k fogs are great, tons of light flooded in front down low and to the sides. Yes the 3000k do work better for fog, snow, and rain. Update, just went through winter, it got down to -15 and the hid lights still kicked on. They might have taken an extra second or so to get to full brightness. Also tried the 4300k set and that is the best, the light output over the 6000k is vastly superior. The 4300k doesn't blind back as much and is easier on the eyes for me and oncoming drivers. 4300k is also optimal for inclement weather. I run 4300k on my truck since that is more likely to be driven in bad weather. The 6000k is still used in my minivan. I am running the Bangzhu 9005 led in highbeams, these are great for low beams too. They have perfect white color almost 5500k I would say. The best part is their beam pattern though the chip design is great, it is just the led chip, there isn't a bunch of extra clutter around it do they put off a good 360 degree light.BANGZHU 9005/HB3 LED Headlight Bulbs, High/Low Beam Fog Light, CanBus Ready Error Free for Quick Installation, Silent Turbofan All in One Conversion Kit, Perfect for Halogen Replacement (2 PACK) https://www.amazon.com/dp/B08HGNVYQP/ref=cm_sw_r_apan_glt_i_542N8VDV91QEB6VW1KWG?_encoding=UTF8&psc=1

The ballasts seem to warm up the bulbs in about 10-15 seconds. Bulbs seem to be of good quality.The output seems to be true to kelvin rating also. No flickering and start reliably so far. I’d buy again.

They came in soon and were relatively easy to install. Compared to LED bulbs these are much much better. Great price for what they do

I really like these headlights they were easy to install and they have a nice color not to mention they are super bright great buy

I have a conversion kit in my silverado as high beams and loved it, so I bought these as my lows and the high beam version. I got the lows in first, installed them by the directions and when testing, the lights wouldn't turn on, after tracing connections to make sure everythibg was secure, I found that the plug that adapts from factory to kit is wired backwards, it'll still connect but it won't lock like it should., now I have electrical tape holding it in place so it doesn't wiggle out again. This morning 2 days later I find that while driving to work 1 light went out, I turn the lights off/on and it lit back up. I'm going to check connections again, make sure everything is right as can be, but if it does it again, I'm returning the lights and going a completely different route.Adding to this review for longevity, I have 1 light that turns on for a few minutes, then shuts down and doesn't turn back on unless I turn my car off and back on.

I’ve had these for about 1 month in my mother’s 2016 Honda pilot (with original halogen low beam projectors)So far so good. No issues with wiring or connectivity, fitment was correct, and beam pattern was close to OEM.

Easy install, HID ballasts leads were long enough to reach desired install location. Provided bracketry was universally stamped, but fit ok. Bulbs are still nice and bright in the projector with decent cut off in our Toyota Sienna SE. Major upgrade, and much needed.

The wire connecter pins are coming loose from the connectors. The metal pins. I placed it back in and so far so good. I had to wrap the wire pins with the connecters so that they do not come loose while driving. Overall it is working but had to fix it a couple of times.