Original Bike Hitches by Delta Cycle - Securely Holds All Bicycles & Fits Any Flat Surface for Safe Transportation - Heavy Mountain Bikes, Road Bicycles & eBikes, Heat-Treated Aluminum

I bought this adapter so that I can mount my new thru-axle bike (work still in progress) onto my Thule roof rack designed for quick release front wheels. I haven't actually used it yet, but it's very sturdy and should work just fine. The roof rack has locks, but obviously, the adapter provides no lock, so the mount is not secure. However, I can probably find a locking thru-axle if I need a secure mount. The price is lower than the Thule version, and I cannot believe that the Thule version would work any better. The product supports multiple thru-axle sizes, including the 12x100mm that I need.

We bought two of these to mount our bikes in the back of my wife's (extra short bed) truck. I mounted them to a cargo bar that clamps into the truck bed so that they would be mounted securely, but easy to remove when not in use. I chose this version that doesn't include the locks so that we could pick out our own locks and get two locks that are keyed the same. These fork mounts work really well. Our first outing with them involved a 430 mile(round trip) road trip with a little mild off-roading in the middle. Our bikes were always held securely and never once did we think we'd bounce them out of the mounts (even on the trails). It might take a little practice at getting the tightness of the skewer on the mount just right, even if you are a pro at taking your front wheels on and off, because the skewer on the mount has an offset on one side and seems to have a longer throw than a wheel skewer. The long throw is an advantage though, because once the skewer is open, it will open wide enough to completely release the forks. This makes it less likely that you'll have to make adjustments to the "nut" end of the skewer every time you mount and dismount your forks. Other users have mentioned that the skewer lever is hard to move to the open position once it's been closed, but I had no issues with mine. I think it's a skewer tightness issue and it could be that the skewer was clamped down too tightly when it was closed. As far as quality goes, I'm really happy with how well these things are made (and I'm really picky). They are very durable and appear to be made of materials that will endure prolonged outside abuse, although ours live primarily in the garage. I'd say that this fork mount is a really good and affordable way to mount a bicycle to the bed of your truck.

Good quality and a decent price. So far I've been very happy with these fork mounts. They operate smoothly. I suggest leaving the little red webbing loops that come with the fork mounts, on the quick release. Otherwise it is extremely difficult to grip the quick release to release it. I mounted them on a treated 2x6 in the bed of my pickup truck. I used #2 torx head screws to mount the hitches, and to attach the 2x6 to my bedliner. This will hopefully mitigate potential theft. I also use two differently keyed Masterlocks and run an eight foot cable through both bike frames, then lock the two cable ends at the two quick releases. This effectively attaches both bikes together, along with the 2x6 screwed into the bedliner. I consistently drive up through the winding mountain roads of Appalachia without them ever loosening, or appearing unstable. I'll continue to trust the Delta brand to hold $2500 worth of bikes securely in the bed of my truck.

We have two bikes that we move around from time to time and we were laying them on their sides (on top of one another) in the back of the F-150. It was a little crazy to say the least when trying to remove them with peddles, spokes and gears sometimes intertwined. So I thought for a fork holder. I looked at several solutions and decided on this one for I have a truck box and didn't want to spend that much on solving this problem. Well when they showed up they were bigger and strong than I thought. No hardware was included, but that was fine with me, for I went out and bought some stainless 1/4" bolts and lock nuts for installation on the back of the truck box. I didn't want anything to rust and I believe most if not all of the components of this product are aluminum or some other type of alloy. They installed without any problem and worked great for two different types of bikes. It has an adjustment nut on the left side to adjust the compression on the lever when engaged. I got locks for them and I tried to pull one of the bikes out to see how strong it was. It didn't give at all. I am very pleased with the quality and construction and would recommend this to anyone who is tired of pulling two bikes apart in the bed of a pickup. Also the bikes traveled very well and didn't move at all over some tougher roads.

Schade, dass es dieses schlichte und funktionale Modell nicht auch ohne den Adapter gibt. Ansonsten bekommt man ja nurnoch das gleiche überdesignte Modell von 1000 verschiedenen Anbietern, oder irgendwelche unflexiblen und überteuerten "Markenteile", aber gut, dann eben mit Adapter... Alles in allem macht das Teil einen absolut soliden Eindruck und passt einwandfrei. Steckachse geht auch einfach rein und mit zwei M6 Schrauben sollte das ganze auch solide am Boden und Dachträger zu befestigen sein.

Macht was er soll. Nimmt Laufräder auf, die abgebildete Platte ist nicht dazu gewesen. Benötige ich aber auch nicht. Sie sind nicht ganz starr und federn etwas. Habe diese im Transporter innen verschraubt.

Ok prodotto perfetto

Au top pour pied tax atelier de blocage rapide à axe traversant plusieurs diamètre nickel

思うような商品で大変満足しております。ぜひ使ってみてほしい逸品です。