CableCreationUSB 3.0 to VGA Male Cable (FL2000 Chipset), 10 FT USB to VGA Adapter Cord, 1080P @ 60Hz Compatible Windows XP/Vista/10/8/7, Mac, Mac OS X, Black

Works perfectly as described. I have a laptop with 1 HDMI port only and wanted to have a 3rd extended monitor, I could not use the USB-C port given my laptop does not support that. Hence, I gave this cable a try, plugged into USB 3.0, installed the driver which comes in the built-in drive, restarted, and, TADAAA. Enjoying 3 extended monitors flawlessly. Thank you CableCreation!

Must use USB 3.0 to make it full HD

It works only with the latest USB version

Very good product! it was Plug & Play for my all in one Lenovo PC

It worked so good and I like it

I own a HP-da 0325tu laptop which is 3 years old. It has 1 HDMI and 2 USB 3.0 ports. I have a 22 inch monitor connected to the sole HDMI port of the laptop in extended mode. I felt the need of attaching one more monitor as the real estate space for my trading charts was not enough. Initially I though of replacing the 22 inch with 32 inch QHD monitor which is quite expensive somewhere around 25 to 35K. So a frugal solution came to my mind. Why not extend 1 more 15 inch AOC monitor which was lying at my home. But I was scared whether my laptop supports 2 external monitors. Even there is only 1 HDMI port. So I bought this USB 3.0 to VGA cable and connected the 15inch AOC VGA monitor as an extended one. I have attached the image. I physically kept is adjacent to the 22 inch monitor to extend my trading chart. Though it reduces the vertical space but the charts are read horizontally. It gives me a screen space of 21.5 inches + 15.5 inches = 37 inches in total. It is a "jugaad" but works for me. The cable is pretty sturdy and the best part is no drivers to be downloaded. Happy with the USB to VGA cable and the seller as the packing was good. I hope this helps.

This cord allowed me to connect a VGA monitor to an HP laptop whose HDMI port had stopped working but had plenty of USB 3 ports. For better or worse, if you just plug the cable in direct from opening the package, you may get 800x600 resolution on your external monitor and greyed out display resolution options in Windows. As the instructions on this product page say: download the drivers and install them first. If you didn't, go to the Cable Creation web site and get their manual. It explains how to remove the entries in your Device Manager. Then start over. When I did this, the drivers activated when I plugged in the cable. This time, the monitor displayed at its optimal resolution, not 800x600. Like many USB devices on Windows, Windows will acted as if it has never seen the cable when I plugged it into a different USB port. I'm very impressed with the quality of cable, and that there is an update app to keep the software drivers current.

Guys, my search stopped at this product.I tried around 5 different cables to attach second monitor to my laptop which has only one hdmi port. I wanted to extend monitors not duplicate them. What I tried is following:1: hdmi splitter gave me same image on both screens2: hdmi switch, it works to switch display from one device to other, did'd work for me.3: USB C to hdmi converter/cable/adapter, did not work.4: USB 2.0 or 3.0 to hdmi .. did not work5: USB to hdmi.. its driver messed up my whole system. this disabled my original hdmi in order to workBUt this cable USB to VGA, it worked perfectly fine. I recommend this product.Just make sure that, after installing drivers, restart your PC and disconnect this cable and connect again.. second monitor will show up in your display setting. Good Luck.I can help with anything, you can ask here...

This cord was great when it worked. It allowed me to connect an additional monitor to my computer when I had run out of display port options. As mentioned, it does require a driver to work and I did run into occasional monitor flickering.I recently starting using the cord with a different computer and screen pairing, and when it started to flicker, I unplugged and plugged back in. Then it stopped working entirely. Tried it with a different display and computer combination and no luck. Tried updating the drivers too. I have never had a cord stop working unless it has been physically damaged, which was not the case. Very dissatisfied with this.

This wire now works with mac.You just need to plug it in and the driver will get installed.It is a blessing for a MacBook Air 2017 user because I feel you guys ......we have to deal with only two ports.Initially there may be a flickering issue but change the auto brightness option to off and it will probably stop.Alas I don't need to change my Macbook 🤪