LightingMan ® Wireless Infrared Monitor Sensor Motion Detector Entry Door Bell Alarm Chime-One Sensor and Two Receivers

Description

Product Description Style: MS-YBQ031 1 Transmitter 2 Receivers Specifications: Working Voltage of the Sensor: DC 3V (2 AA batteries) Working Voltage of the Transmitter: DC 9V Frequency: 315MHZ Working Range: Up to 100 meters / 328 feet (open field) Infrared sensing distance: 3-7 meters Music: Classic Single "For Elise" Receiver Switch Setting: High / low volume / off Note: 1. Avoid installing the sensor to the position facing to air conditioner outlet, exhaust fan vent, electrothermal furnace or heating installation nearby. 2. The sensor should be mounted in the height of about 2 meters. Place the sensor at the entrance side or top, and adjust it through the rotatable support, in order to reach the best effect. 3. Reduce obstacles and interference from other wireless signals between the sensor and the transmitter. Usually the distance should be about 10 meters when there is a wall between. 4. When the LED indicator does not go on, the battery power is either low or dead. At that time you should change the batteries. 5. In case of high temperature (above 30), the sensing distance of the detector may be shorten, this could be normal phenomenon. 6. Important: please keep the detector & receiver in sheltered places to avoid contact of both units from water and direct sunlight and metal. 7. Clean the detector regularly with a damp cloth to avoid blockage of sensor by dirt or any small particles. 8. Try to keep it in areas where it will not get wet. In addition, during heavy storms & snowfalls, it is recommended that unit should be moved indoor or in a safe place. 9. Never attempt take apart the units.