Art3dwallpanels PVC 3D Wall Panel Diamond for Interior Wall Décor in White, 19.7" x 19.7" Wall Decor PVC Panel, 3D Textured Wall Panels, Pack of 12 Tiles

I love love love this background!!! I was kind of nervous but I did it all by myself. I used gorilla double sided tape. I just put the tape in all 4 corners and then stuck it to the wall. I went all the across and then started a new row. The texture is like plastic and it’s like 4D. Its soooo cool! This is 2 packs to fit my normal size wall. Also I did a before and after picture.

The media could not be loaded.  I’ve gotten soooooooo many compliments on this wall. I used 3 boxes it’s in my salon and I absolutely love the aesthetic it brings. So sleek but still edgy. The tiles were easy to install except for the pieces that needed to be cut, luckily I had someone who knew how to use a handsaw cut it for me because using scissors was impossible at least for me it was. I used Scotch double sided tape to hang the tiles I placed the tape on each of the 4 corners and they hung perfectly. Highly recommended 10/10

The media could not be loaded.  The Art 3D wall panels have been an amazing addition to my editing bay. They are sleek, stylish, inexpensive and most importantly work at helping to dampen the sound in my studio.I have purchased many sound-dampening foam, boards, and panels over the years and these are some of the cleanest that I have purchased.The only consideration is ease of installation. It takes more effort than self-adhesive foam boards or panels. You will need to grab a calk gun and your choice of adhesive glue and make sure that you plan on being careful when planning and adding them to the wall because you have to hold them there for a few minutes and clean up any glue when placing them on the wall.Overall the cost, look and utility is on point and I highly recommend them.

Beautiful great product

These panels are very good quality in terms of being made from decent material and having a good finish. I wanted to keep them white for the purpose of my Govee interactive TV lights and they look perfect unfinished.Mounting was very simple. I actually used 3M Command picture mounting tabs so that the panels could be pulled from my painted walls without damage. 5 stickers per panel was fine (4 corners and one in a center point to anchor the plate).My only complaint is that the directions suggest you can easily trim these with a wallpaper blade. This is absolutely untrue. These are decently strong panels and require a good amount of oomph to cut through. This wouldn't be a major issue if they were flat, but the 3D surface makes this a fairly momentous task. I ended up using a table saw to make the cuts, but be warned. Because this plastic is relatively rigid, vibration and the oblong angles make the plastic apt to chip. The best I could do is use some tape over the cut itself to keep the edges from bending and chipping. I still got some pretty significant chips but was able to hide them with some tape and DryDex (spackle). You may find a better result with a laser level to draw the line on the surface then hitting it with an angle grinder.My best advice is to not need to cut them in the first place if you can help it.Still, the end result is an A+ for me, so I can't knock it too much, other than the poor advice about the wallpaper blade.

Light weight you can even install it with fun-tak if you are renting

I read through a ton of reviews on these tiles before pulling the trigger - after all, they're a little on the pricey side. But one particular review caught my attention: the person that did an installation and had a red spotlight shining on it was enough to sway me to buy. Everyone else's applications are fine and all, but I found they fell a little on the boring side.I recently upgraded from a queen bed to a king, and already knew I wanted these tiles to make one hell of a headboard statement and had done the math right before ordering, so I knew after install they would be the exact width of the headboard I already had coming.I don't need to say much here in this review, because pictures say far, far more than words ever could - so take a look and see for yourself the statement these amazing tiles make once up! I am absolutely over the moon at how this turned out, and can now easily justify the expense here - no single piece of art could have achieved what these tiles do, especially for the price!P.S. I used simple 3M mounting tape, the kind designed to replace the adhesive on LED strip lights when needed - and it worked flawlessly. I went the entire perimeter of each tile to ensure nothing would come loose, and so far (three days later) not a single tile has come down.

First of all let me tell y'all these are amazing I had a friend help me out and do all the cool measurements and everything I put it before and after a how bad my wall was these tiles look amazing very easy to cut and shape to the size you need I think they're well worth it for the price I recommend you I also recommend you buy a lot of command strips I'm talking about at least a pair of 40 of them or you can use some type of like glue might mess up your walls though!

Adds a nice 3d touch to my wall, everyone that comes to my house loves them

Se mira muy elegante es muy fácil de instalar.

Was unsure about whether these could look cheap but they don't. Bonded really well with a PVC adhesive. Uniform size and easy to align they were just the look I was hoping for.

Echt gute Qualität robust optisch hin gucker.