RASTP 64Bit PC USB Handbrake for SIM Racing Games,Black,Without Clamp

just bought my second one after 4year of ripping it and gotta say they refined it since much better quality and solid its powder coated

Two stars for the build quality, which is not bad. The rest is bad, The box was missing the instruction, came used, and didn't work. Every screw was loose on the devise, Every screw! I was able to turn bolt's and nut's with my bare fingers, only two screws were tight. The device was missing the manual and came with grease smudges and hair stuck in it, on top of that it did not work. I did troubleshoot it and the end resault is the sensor isn't working at all. on top of that I bolted in to the rig before testing, so it was awful to do all the work and getting absolutly nothing good from it.

Cool handbrake, easy setup, only downside is that it doesn't come with a clamp

Do not buy this handbreak. Used it a total of 2 times and on the third time, my PC does not recognize it with the error Unknown USB Device (Device Descriptor Request Failed). Tried connecting to my laptop and a friends PC and all of the get the same error. I Will try to get my money back.

Didint see the not compatable with xbox i thought. I coukd scnrew it into my desk no bolts were to short

Alright, so I bought this knowing it was an off brand budget sim handbrake, so I got exactly what I expected. Bonus is that this thing doesn't seem like it will ever break, it's made out of all metal. In the future I'm probably going to build a housing where the USB cable meets the sensor board as any slight tug will most likely break it. That's probably the biggest fail point on this device. Per the video, one star removed because at zero and 100 the sensor isn't calibrated correctly so it'll jump around (and the wire issue). You can easily fix via software or with the screw on the front of the device. Works well in Assetto Corsa, haven't tested it in anything else yet.

It works, she looks nice with 3d printed pistol grip handle.

at first glance the Handbrake seemed great. it wasnt until I went to use it with my race rig when i started noticing how cheap and poor quality the product was. A small PCB Literally just sitting in the front housing, with hot glue holding the USB cable in place and a red tag that says do not unplug... the adjustments on the side of the handbrake do not make it feel tighter or looser at all. its just just a threaded cross pin and it comes out constantly. Had to adjust my handbrake deadzones as well cause the Cheap USB cable and PCB was causing a slight signal that was being sent from the handbrake. making the cars tires lock up randomly or just not accelerate at all. to put it simply, this will do what you need it to do with some tweaks, but over all its not great.

purchased this for my sim drifting rig with a g920 wheel, this does work with the g920/g29/g27/g923 if your using it on pc this does not work for xbox or playstation 4/5 unless you wire it to the button on the motherboard of the wheel, so far the thing is amazing. theres a couple reviews on here talking about the usb cable being held in with glue and that is not the case at all, it has a cover that the pcb board is held on to and that has a slot for the cable to stick inside and be held down firmly, ive been yanking on this for the last 5 hours straight and have yet to pull any cords like others clamed, this is truly the best bang for your buck, the only con about the whole thing is the guide bolts on the side tend to rub on the metal housing of the unit causing slight noise when pulling the handbrake hard, ive fixed this by adding a tiny bit of dielectric grease where the two points make contact and has helped alot

Returned Item, This could easily be a winner... but the sensor only calibrates (reads) to 60 percent... the point is to lock the back wheels... if 60 percent doens't do that wtf is the point of using this as a handbrake? Also how hard would it be for the manufacturer to simply TEST the damn thing before final packaging... it would literally take 2 minutes and not waste my time. My old one was a similar brand, I got 2 years out of it but now the thing Reads when not being pulled....without even the most basic software to tweak or adjust around these issues... I would personally avoid any of them and save up for a legitimate brand item, Thrustmaster, logitech, Fanatec etc.... or you are just rolling the dice with these.

Defective from the start. Comes with a cheap USB cable different from whats advertised and the USB cable is plugged directly on the circuit board micro SD port without any good support. When plugged to the computer, the system and all games recognize the controller as a ANNX handbreak but the magnet sensor does not work. When doing the test in the game controller settings and trying to calibrate the hanbreak, the slider is at 100% regardless of the lever position. The aluminum construction is OK but the arduino module and mounting plate could use a better design. Returned it right away.

Doesn't work in game. Registers as a device on the OS and selectable in game (dirt 2.0) as an e-brake, but does nothing. I waited too long to try and return it to get my money back, which is why I'm giving a bad review. Quality for me seems good. If it worked it would be solid to use if attached properly. Came with various length bolts and nuts as well. The price was right compared to others. Don't wait a month like me to see if it actually works and you would probably get your money back. I'm also familiar with Arduino and these ebrakes don't look terribly difficult as a small project. So the hardware and board is still useful to me. Over all as a usb device I and others expect it to just work. Especially if using windows 10 (modern, common operating system)

Don't be tempted to save a few $ getting this handbrake. While it did work with my setup (PC playing DR2.0, WRCG and EA WRC) it stopped working after like 2 months. Won't register at all on USB. Also, the action feels pretty bad and the spring without elastomer is really "snappy." I ended up spending a few more $ on the MOZA HBP and it is much, much better.