CXRCY Torque Converter 3/4" 10T #40 41 420 and 12T #35 Chain 212CC 30 Series Go Kart Mini Bike Clutch Comet TAV2 30-75 Engine Drive Replacement for Predator 212 Clutch Set

The media could not be loaded.  This works amazing propelling my ezgo predator swapped golf cart! The original belt was decent, and I still have it, but I did get a heavy duty belt upgrade, which was an improvement! I though about getting a 40 series torque converter, but this one is working amazing! Nothing like just smashing the pedal in my gc and getting to 28mph lickety split!

I installed this on a Baja mini bike with a 6.5hp Honda clone engine. I replaced clutch and chain. I was able to install without lifting the engine. I had to reengineer the chain guard.Tip #1 is to adjust the rear pulley to the tightest spring setting before installing, otherwise you mightiest well keep a clutch. The hardest part is removing and installing the snap ring.Tip #2 when installing the left pulley, make sure the flat side of the 1st piece is facing out, against the belt. Someone said that this unit was eating belts, flipping this part will cause this.Tip #3 the belt goes on left pulley, than slip over the right. The directions don't say it well but the flat side of the belt goes against the engine making the beveled side out. In my case the writing on the belt was facing so you could read it. Get this belt backwards and it'll eat the belt and slip.Tip #4 use a large strap wrench to tighten the left pulley and a impact to tighten the right.Tip #5 Put blue lock tight on all fasteners.Tip #6 You might have to cut the front part of the plastic cover to clear engine bolts, and you need to slot the rear for chain clearance.

Included bolts to mount the torque converter to the engine do not fit a Tecumseh 6.5 HP OHH60-71157C.This was a free engine given to me, I have no idea what the original mounting bolts are, sorry.

Some parts pre assembled. **check fitment of backing plate for obstructions ie;bolt heads. or oil fill cap **preventing plate to fit flat and straight. Good quality.item Great price. for fit on a 212 predator engine

Amazing bolted right on. Make sure to use lock tight or impact good for the mounting plate. After all my upgrades it's hit 37. I'm 200lbs 5'11

First off the bolt that went into the crankshaft snapped so I went out and bought a grade 8 bolt. Second after maybe 45 minutes wheel with the weights n springs. The nut came off while riding and destroyed the whole assembly.

.

No to bad for the money paid. Part are a little rough around the edges, nothing some sand paper can fix. Package was flip or thrown during the process lack of packing material resulted on crack cover.

Instaler sur un moteur pour projet

Llegó incompleto. Falta la flecha en la que se monta el piñón que de la transmisión a la rueda. Se devuelve todo o me hacen llegar sólo la flecha?

Mouvais ils ne veulent pas vendre de pièces de rechange .les courroies ne dure pas très longtemps c’est dommage..