2.75" Universal Clamp On Exhaust Hanger - MADE IN THE USA…

The nuts for the hanger and the u-bolt are too close and will overlap in certain scenarios where there is a bind on the hanger bolt. It would be nice if the nut was smaller or offset so that the overlap makes it easier to work with. I used a sawzall type of cutter with a metal cutting blade to cut the excess bolt length when done with the install. The parts are well made for the most part and work well for my cracked hanger that was welded on. I used the old hanging points with the old rubber bushing, at least until that fails.

As others have mentioned it's super easy and effective. Only modification I made was using my Dremel to cut off the slack because my subaru is low and I didn't want to potentially strike something on the road with it.But its good there's that much because it's universal, maybe someone else needed that extra, ya know?Great item

I enjoyed every aspect of this product. my truck should have had this robust bracket from the factory. It was a great design and fit like it was made for the hanging of the 2.5" pipe exhaust. Took less than 10 minutes to install. Using one box end wrench. Pipe no longer rattles and stays where it is designed to stay! Delivered on time as promised. Heavy duty Plated steel with bolts and nuts included. Priced competitively.

these look cheap compared to the factory hangers, the OEM are more robust, but with my aftermarket muffler I could not use them, so I found these hangers/clamps and 2 years later they are still hanging in there. 5 stars because they are 2 in 1 hangers and clamps and because they are durable, I thought this was a temporary fix but they are permanent now that I see how long they last. $3 or $4 buck for a clamp but $20 to $25 bucks for these because these have a hanger. ???????

This worked great to cut my aftermarket exhaust shorter on my 2003 V6 4Runner and hang it to the frame with the Walker Exhaust 36516 Exhaust System Hanger. I cut off the extra thread on the hanger which was about 5 inches for a cleaner install. It's very sturdy and no exhaust rattles!

This thing is easy to use and very adjustable. My project didn't go as planned and I was unable to use it, but it "hung in there" (lol) in the interim. Good stuff! p.s. let me know if you want mine.... jk

Works well very simple design, I ended up bending the tip over just a little bit more to lock it more in place on the hanger

Used this on a 2008 Xterra to replace the front muffler hanger that rusted off. Fits perfect, had the cut the long bolt to make it fit but no issues after that.

Does the job 👍

I couldn't seem to find a 2.25" universal hanger for my v6 Escape here in Canada so resorting to ordering this from America. There was a bit of a delay in posting it, but I wasn't in a rush really. Quality is great and fitted my mid to backbox section really well to replace the rusted off hanger. The height of this bracket is different to the original obviously so it's at a slight angle to fit the original rubber buffer, but it doesn't effect how it works at all. I like how it comes with plenty of length on the threaded angle bar to fit a wide range of cars, i had no issue cutting the rod down to tidy it up a bit. I'd buy another if I need to for another car!

Works well for most applications. It is pricy

Good quality.