DYWISHKEY 1220 PCS M2 M3 M4 M5, 304 Stainless Steel Phillips Pan Head Screws Nuts Washers Assortment Kit

I used these to fix the graph on the front of a bass boat that the fiberglass had cracked in. Used a rivnut and this hardware to hold in the graph

Good quality great variety of screws, nuts, and washers for the hobbyist. Give your projects a beautiful sturdy look with this small set.

Great bolts, washers, and nuts for my 3D printing projects. The base itself is thin and cracked, but the contents themselves are great. Plan on having your own organizer and this will work out just fine.

These work fine for me, it is a good assortment and the quality is just fine for my use: light electronic prototype assembly. The hex keys worked OK, were a little loose but otherwise just fine.The supplier must have been listening to the problems folks were having with shipping because my shipment arrived with all the screws, nuts and washers in their correct bins. The bins are not removable (one piece), and they put a small piece of bubble pack on the inside of the plastic tray under the lid to capture any loose items. The plastic tray was then wrapped in bubble wrap and shipped in a form-fitting box.I will be buying more of these kits - good job DYWISHKEY. Thank you.

I had read that some peoples shipment came with the contents scattered between dividers. Mine came wrapped up tightly in it's own shipping box. The actual container was then wrapped in plastic wrap, and the individual nuts, bolts, washers were in their own plastic bag! Very nice! Nothing messed up.One thing though... the allen wrenches were in a separate bag outside of the nuts/bolts container, so... don't lose those when opening the shipment.These are a great value for the amount you get, and they've worked perfect for my project.

It is what it is. would buy again.I also bought some inserts for these. Depending what i'm doing. I don't always use the inserts. I just screw the screw into my 3D prints. I'm not sure if the inserts are stronger. I have not done a strength test but they do hold pretty well, I can't pull them out with my fingers. I might even consider not get any more inserts.Your printer may vary but here is what I found that has been working for me on my Ender 5.5M - 4.25mm hole4M - 3.5mm hole3M - 2.75mm hole2M - I recommend using an insert. The threads are very small.

Good assortment and keeps me from running to the store for a single part.

First off, the packaging and selection is awesome. Each selection of screw is packed in it's own little bag so they don't get all mixed up. The included allen wrenches are also okay, a little small for my big hands but they do their job. The issue is the smaller ones can get stripped really easily. I overtightened just a little bit and stripped out two of them unfortunately.