CNBTR Black DC4.8-6V to 600KV Pulse Generator Board Ignition Coil Boost Step-up Power Module Ultra-high Voltage 600000V

Description

Note: Due to the light and angle, there will be little color difference between picture and object. Feature: 1. The high-voltage module should avoid the use of electricity in high voltage no-load. 2. Power must be adjusted to a suitable distance to the high-voltage output line, battery capacity is proportional to the distance and the use of the high-pressure arc (not a voltage as high as possible, you must provide enough current). 3. Experimental test of the arc distance from short to long. Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure, can easily damage the module. 4. Due to power, the internal heat is not easy, every power-on time should be controlled within 10 seconds. 5. Determine whether the battery capacity can be driven approach is the maximum power output of the battery when the voltage measurement arcing. If so you can 6V maximum power output. 6. Two sections of small capacity lithium series of 7.2V, measured arc voltage has dropped to about 4V state, the capacity of the smaller voltage pulled lower. It is recommended to use more than one lithium battery 2000mA,and it is best to use one battery more than 4000mA. Specification: Material: Metal + Plastic Color: Black Size: 88 x 26 x 23 mm (L x W x H) Input Voltage: DC 4.8-6V Output Voltage: DC 600KV (Please pay attention to safety when used) Input Line Length: more than 150mm (red is positive) Output Line Length: about 160mm High voltage bipolar discharge distance: 10mm-20mm High type: Pulse Current Structure: high and low voltage integrated Weight: 88 g Package Include: 1 x 600KV Boost Step-up Power Module