Color Enhancer Sealer for All-Natural Stone and Pavers. Marble, Travertine, Limestone, Granite, Slate, Concrete, Grout, Brick, Block. (trial)

Looking to Re-New an older slate tile floor from everyday foot traffic. Black Diamond Stonework's Color Enhancer truly does make natural stone colors "Pop" giving that new floor look again. Easy to use product application & plan on using their floor wash product as maintenance . Will see how floors hold up for durability, but very happy with how they look Re-Newed with beautiful color again.

This amazing little product took my tiles, and I just installed on my backsplash in my kitchen from looking like a very chalky pale color to bringing out its natural array of Earth tones and took the chalkiness away. I only had a very small area to do so. I just brought bought the small sample size It worked fantastically, and it was exactly the amount that I needed. In the photo, the small piece of tile in the front is a extra piece i had left over that has not been sealed.You can see that its color is a lot paler than the color of the tile around it. The directions were easy to read and basically I painted the sealer on I did two coats.And the little bottle that I bought was perfect for covering the thirteen square feet that I had. I have just completed the backsplash, so I cannot say long term.How things will go?But for the time being, everything looks amazing.And I am very happy I believe this product needs to be reapplied occasionally.So I will end up buying the larger one in the future, but for the time being.This was what I needed, and it was perfect.Great value great product!

It made a small bit of difference but hardly anything, complained and was told it worked as it was supposed to and the stones I have are a light colour, it is a good sealant though for sure, would probable work well on darker stone.

very easy to administer we did buy a sprayer and a decent broom . love the effect it has really brought out the colour of the sandstone pavers, and everyone said it looked lovely.

I purchased this product when I noticed that after using my conditioner after cleaning, the floor (natural slate) seemed to dull out within a day. In the past, after cleaning/conditioning it would stay bright for weeks. Realizing that I had not sealed my slate floors since I installed them almost 20 years ago, I guess they were due. However, the conditioner does put a form of sealer on the stone - but just not a 'permanent sealer' - as this product is. If you are also using a conditioner and then use this product for a more permanent sealer, please note that unlike the conditioner, which you can walk on as soon as it dries (20 minutes or so), this is a true sealer and took over 24 hours before it was totally dry. It may leave footprints and feel tacky if you walk on it sooner. Considering the cost and not seeing much difference after it was done (see before and after photos) I was happy for that - because I do remember when I originally sealed the floor we could not walk on it for quite some time, and it looked beautiful for years. The 'before' photo was taken after a very thorough cleaning (hand scrubbing the grout, etc), hence, the difference is minimal. Look at the front tiles in the 'after' photo and you should be able to see where I stopped applying the sealer for the day. It is hard to determine from the photos, but it does have a nice slightly 'wet look glow' to it - compared to the unsealed stone. It has been several weeks since I have done this part of the floor and I can say it is retaining its glow very well. I held off from continuing with the rest of the floor only because of some of the reviews that stated that the sealer actually put a haze on the stone (!!) after a week. So I held off to be sure that would not be the case. It has been several weeks and that did not occur. These types of sealers appear to be very sensitive as to what it is applied to the floor (i.e., sealers or other products) before applying this product. I believe that may be why some reviewers may have experienced the haze. I was happy that the product did not react with the conditioner that I use about 4-5 times a year. I used foam brushes to apply the product and that worked very well. The only issue that I had not anticipated is that you must lightly wipe off the residue about 10 minutes after application (I used new microfiber cloths). Since you only have so much working room, I found it difficult when applying since I knew I would need to be able to reach the area 10 minutes later for wiping. That, and you must not let the sealer dry before wiping off the excess made the work flow limiting and took several hours to do this small room (about 6x6). The good news is that although I bought the gallon container based on the coverage, I thought the product went a long way so I'm not worried about running out. Overall, I'm happy that my floors look like new again and I suspect keeping it clean will be easier for quite a few years.