Plumb Pak PP836-70PCPOL Universal Fit Toilet Handle Tank Flush Lever, Decorative Faucet Style for Front, Side, or Angle Mount, 1 set, Porcelain and Chrome

Bought this handle to match the handles on my sink faucet. It's really nice and heavy quality porcelain and chrome, and I had it installed literally in less than 2 minutes. Unscrew and remove the old handle; put the new handle in place, tighten the bolt, and attach the chain. That's it. Very happy with my purchase. Didn't send a pic as it looks exactly like the pics in the ad.

Easy to install and looks great!

My wife loves the appearance of the porcelain/chrome handle, the heavy feel of the handle, and the fact that it never sticks (flush and forget). We had a toilet tank flush lever that was sticking badly due to corrosion of the metal parts that pass from the outside of the tank to the inside. I initially bought this handle as a replacement at a big box store because it was a good match to the original. After installing and using this handle for a year, when the cheap lever broke on a second toilet I bought the product again through Amazon. This lever has the following key features that make it far superior to all other options. It uses strong plastic instead of metal to prevent sticking due to corrosion of the parts that pass from the outside of the tank to the inside. The second is the fact that this lever contains a spring that causes it to return quickly and consistently to the original position after a flush. The tanks I installed it on had the handles on the corner at a 45-degree angle. The install went very quickly as the only adjustment requirement was bending the brass lever arm so it was aligned with the flapper. Key points regarding the install. The nut that secures the handle to the toilet tank is reverse threaded. So if you follow the normal lefty loosey rule, you will not be able to get the old handle off. Make sure the tank standpipe height is about an inch below where the handle passes through the tank, so the water will overflow into the bowl instead of leaking out around the handle when (not if) the fill valve does not close.

It works and looks very nice on the outside of my toilet. I am satisfied at this price point. However, I had to take one star off, since I had to bend the rod around a bit to make it work.The product comes with a rod that is pre-formed into a series of perpendicular bends at different angles. The instructions tell you how you can mount it one of two ways. You get a tiny hex wrench included to loosen and then re tighten the rod. You mount it at one end for regular toilets; the other end for side-flush toilets. I mounted it in for my side-flush toilet.It still didn't fit at first and I had to creative twist and bend rid so it wouldn't bang into internal fixtures make contact with tank top at the upper most extension. Not terrible.. just a little extra creativity involved there. All good now.Durability looks..."ok", but not expecting much here. If it lasts 3 or 4 years I will be happy. It's a $21 flush handle for goodness sake!

Just had to replace my 35 year old toilet due to calcium build up in the race track. I purchased a new American Standard and should have done so much sooner. It uses far less water and flushes with gusto.The flush handle on the new unit is "low end" so I wanted to replace it to match my sink handles. This handle is perfect in quality, heft, utility and looks. You can't go wrong; I'm impressed with it!

Who knew a toilet flush lever could be a joy to use? My 90-year-old house has a vintage American Standard toilet whose flush lever would intermittently stick, causing the toilet to run. This lever matches the porcelain and chrome of the other fixtures in that bathroom, installed easily and fit perfectly. What's great is that the action is smooth, precise and solid, giving a feel of quality like closing the door of a Mercedes. A nice upgrade that you notice a few times a day, well worth the small incremental cost above a basic version.

Finally found a lever that works great on my toilet. The lever is on the side of the tank and no other lever (and I have had several) seemed to work well. It even looks great and matches the other hardware in the bathroom. Took about 20 min for me to install but if you know what you are doing you could probably be much quicker.

My old lever would be difficult to work and hung up wasting water. The new one has improved bearing and a smooth action.

Seems a bit pricey, but this is a super quality handle....actually nicer than the one that the developer installed at our house. Easy to install, plus the weight and quality of the components gives much comfort to this being a permanent solution.

Very easy to install. Offers adjustable mode so you can install on different configurations. High quality and nice design.

Excellent value! Solid and well made! I’ve since replaced all my toilet handles to this one

Love it! It matches my sink handles. Easy to install. Sure beats the plastic crap that I replaced. Nice and heavy. Highly recommend.

Very high quality! Made my ugly new toilets look classy.