StewMac Conductive Guitar Shielding Paint, 1/2 Pint, Water-Based Brush-On

The best of the best product..if you want to shield your inst , don't cut corners and buy some iffy stuff to save a few bucks you might be sorry. This way there's no dought your guitar will be shielded properly. Just my 2 cents worth!

This is the real deal. Worth the price as it does what it is supposed to do without the hassle of messing with shielding tape. My only complaint is that it requires 3 coats, and each coat requires 24 hours between them, so if you're needing to get done quickly, this is not the solution and better to go the tape route. If you have 3 days to spend, though, this is definitely easier!

After considering the other available alternitives, I decided to go with the Stew Mac conductive paint. They tend to be a bit pricey but if you are serious about your guitar builds, their products are always the best available for aspiring Luthiers.

The stuff just works. Spend the $$$. Can’t go wrong Mix it well.. 3 coats let dry between coats. Can’t go wrong.

This is the best shielding Paint. I’ve tried numerous others but none compare to Stew Mac’s Conductive Shielding.

Excellant coverage. Put 3 coats on and great performance. Highly recommended. A little pricy but worth it.

This is a great product. Goes on nice and thick, and rings out like it should. Make sure to shake thoroughly before each use. Note: this is a graphite suspended product, and that is how you get your continuity, similar to a brushed motor. You must apply evenly and even though you do get a nice coat with just two coats, I suggest using all three coats as suggested. This will assure a lifetime of continuity, unlike copper tape that is flimsy and cheap, and a bummer to work with. This being said, copper tape is a quick turn around in a pinch, just use a quality tape with a good mil thickness.

Outstanding coverage, quick dry time, & great conducting. 👍