Diode DynamicsSS3 LED Fog Light Kit compatible with Toyota Tacoma 2016-2023, Yellow SAE Fog Max

as stated not plug and play they send only 1 adaptor and that adaptor only had 1 side the other side was just bare wire. Called/ Emailed no response now i got to go to a repair shop to get the lights hooked up wonder how much that's going to be. Next time treat your customers better Diode Dynamics, I might as well have bough from china

Very sturdy well made product from DD. I was able to install quickly without removing fender well on my 19’ Tacoma OR. This was contrary to many YouTube videos where they removed the fender well; I figured there has to be a better way! First, take the grill out, (very easy) remove the 2 side guard deflector things on either side of the radiator, they’re only held in with 1 push clip each so no tools required, and you’ll have sufficient access to both fog light assemblies. Both OEM fog lights are held in with 1 small screw! I was surprised but that’s all that holds them in. Tip: use a snubby ratcheting Phillips screw driver, this allows better access for your hand to do the work. Replace with DD lights one at a time and adjust the light pattern by matching up the light pattern on your garage wall with the other OEM foglight first, then repeat with the last DD light, worked like a charm. Yes, there will be a small gap at the bottom of the OEM fog light housing with the new lights. I thought it was weird until I found that they specifically recommended this gap for proper beam alignment printed on a card in the box. That was backed up by the fact that when adjusted to the OEM beam first, it was right in line with the DD recommendation. Super bright in my garage but haven’t road tested yet. I’m sure they will work out nicely. Hope this helps somebody out!

These fog lights took a lot less time to install than I thought, and everything went flawlessly. Having a small stoplight inside the fender well helps when connecting to the factory plug, since range of motion is limited. I mounted these in the supplied brackets all the way forward and downward. The edge of the light housing sits flush with the factory openings. These lamps light up reflective street signs twice as far down the road compared to the stock projector headlights on low beam, and the yellow tint gives you a full appreciation of the range. I bought these straight from the manufacturer so they charged me $10 shipping but it was definitely a good purchase at $300

Diode's products are built to last. I cannot overstate how solid the SS3s are. There is no cheap plastic in their construction. Install on a 3rd Gen Tacoma took less than ten minutes.Factory removal:Open the hood, reach down, remove the wiring harness plug connected to the factory fog light, remove one screw holding the factory light to your Tacoma, pull out the factory light.Install:Connect the SS3 body to its mount using the two bolts provided; aim it however you prefer. Reach down behind the grille, screw the light into your Tacoma using the factory screw, connect the Diode wiring harness, and you're done.These lights are bright! I took my truck for a test drive at night after install. The fogs have a wide field-of-view so you can see the side of the road, yet they offer great throw and are brighter than my headlights.

Your browser does not support HTML5 video.  Got the SS3 for my subaru legacy because factory lights are horrible on these cars...let me tell you the difference is PHENOMENAL. I can see everything with these fogs. If you're reading this review because your hesitant on the purchase, their absolutely worth the money! Do it! These are the PRO version. I have zero regrets with this purchase.

Does what was intended. If you drive when they are not needed like some people, they are too much and other drivers get annoyed. Maybe you want that? Plugged right up. Kit installed easy. WAY brighter than stock.

These fog lights really help illuminate the sides and lower part of my truck the stock headlights don't reach. Installation wasn't too bad, I removed the front part of my fender liners to remove my stock fog lights and install the new units. I have these pointed down as far as possible for proper aiming. I do have a 1" level kit in the front. Overall very happy with these fog lights.

I got the white sports, and they are perfect for my 2021 Tacoma. They are exactly the brightness I was looking for, without being too bright to annoy other drivers. It lights up the road just like I was hoping for.

Awesome thank you