KFI Products 100630 Winches, Regular

Overall the mount is of nice quality and appears to be pretty robust (haven't put it through it's paces yet). However a couple concerns, issues popped up. First, the install directions were a bit fuzzy on exactly where/how they wanted the washers installed. Second, i felt like the bolts they provided were too short so i ended up getting longer ones from the local hardware store. Third, design wise i'm not sure they way this mount connects to the wheeler is the most robust solution. I feel like hanging onto the brush guard is putting a lot of faith into the brush guards connecting points vs. tying it to the frame somehow. Lastly, the stock roller fairlead that comes with a Harbor Freight Badlands 2500 winch will not fit the bolt spacing on this mount. I had to spend another $16 on a different roller fairlead, so something to keep in mind when calculating your total investment in adding a winch using this mount.

Didnt fit up easily but my ATV is 22 years okd so the companies one-size-fits all works u just have to have a little patience

Try adding a winch to a 1995 Polaris 425 Magnum! Its a pain to do without a kit like this! The design is right on, took some time to get it mounted on the 4-wheeler, but it works great and will last for years! The bolts seem too short until you play around with the mount. I found that if I put all of the hardware on at the same time and waited to tighten everything down, it made the install a lot easier.---Pros----Great Quality-Easy to mount-Works with almost any winch-Looks like a factory piece---Cons----Have to remove the side radiator guards (plastic shrouds on the sides of the radiator)Overall, great mount for the Polaris and will probably out last the 4-wheeler! Great design and it works with pretty much every winch out there.

When I bought my ATV the existing winch was attached to a plate welded to the push bar, functional but just barely. This mount was not only a direct fit for my ATV but it bolted right up with zero issues. Comes with everything you need and the extra winch mounting holes allowed me to attach a hook for winching with a block and pulley. I found that 2 of the bolts were a little too short but I think that was an issue with my rig's push bar and not a flaw with the mount or hardware. If you're on the fence with this mount jump off, order it, bolt it up and start pulling.

Well built and easy enough to mount if you have some experience with ATV winch mounts already. Great price considering that it is made for 20+ year old ATVs.

Fit well on my 1991 Polaris 350L trailboss, I would suggest getting a little longer bolt for mounting. Otherwise, product is just as described.

Best value priced

This was easy to install. One word of caution though. You may have to put a spacer under the winch to offset the winch motor over the side. This is necessary to center the cable for use with a plow.