HOMACER Sliding Barn Door Natural Pine Wood Panel Slab, 30in x 84in Double X Design Frameless, Hardware Kit is not Including,Perfect for Interior, Exterior, Closet and Bedroom Use

The price was very good.Quality also very good, especially seeing the wheels were fitted with bearings vs. bushings.The reason for my 4 stars is due to the poor instructions when 2 lengths of 5' 6" long track are being used.Instructions say to locate the studs and mark out the holes, matching the 16" centers on the track, no problem.What is not taken into consideration by the manufacturer is that placing 2 sections of track end to end as in myapplication, the 16" centers are off on the 2nd track by 2" due to the end of the track being longer for the joiner bracket.After marking and drilling the wall as per instructions, I put the tracks up with the 2 sections connected together and all the holes in the 1st track matched perfectly.The 2nd tracks holes did not line up and I had to drill new holes in the steel track at each stud location in order to mount it.It looks a little odd with all the original holes still showing but it works.The sturdiness concern is based on the small diameter spacers.They actually started to sink into the drywall due to tightening and the weight of the door.I added 3" diameter steel disks behind them to spread the load over a larger area and the problem is solved.I will purchase more for future projects.

My wife and I made our own barn doors....because ordering 2 25x87 inch doors was insanely costly. We researched the hardware and found Homacer that sold an 8 foot section with double sliders...the sliders come in a variety of styles, we chose the horseshoe ones. Package arrived in the correct amount of time, and installation was simple (although wearing on the arms of the person holding the bar up while the other one marked holes, and checked level ....real important to check the level a lot!).The fun came putting the sliders on the doors....measuring six times to make sure that the doors will hang correctly. Did I say fun?End result was very cool, the sliders are whisper quiet and roll quite nicely.I highly recommend this product. The finished product is the photo.

I bought an 11' two piece track. It's supposed to have mounting holes drilled every 16" (to match the wall studs). Turns out that each half does have holes every 16". However, where the two halves are joined in the middle, it jumps to 18-1/4". Not a crisis - unless you don't check it and just go drilling holes every 16", only to discover that your drilled holes don't line up with the holes in the track. In this age of REALLY CHEAP CNC machines, this is TOTALLY unacceptable. I can do better than that just doing it by hand with a tape measure. Heck, you don't even need CNC. As a minimum, they SHOULD have a drilling jig so all holes are ACCURATE! Lame. On top of that, the mounting bolts for the rollers are 1/4" too long for mounting to a standard thickness door. Would it kill them to include some spacer washers? Note to the mfr., raise the price by $2 and INCLUDE some spacer washers!

I needed stout hardware for a 200+ pound custom door and this kit was perfect for the task. It is very much heavy duty and able to handle the load. This kind of weight required me to install a header board that was secured to the studs in the wall. Otherwise, the screws would have pulled out of the sheetrock. The mounting points on the rail are not 16" apart like most wall studs. They are more like 19 ½" apart for some odd reason. Another reason why a header was needed. The hardware was not difficult to install and I have zero concerns about the door ever coming loose in the future. The directions in the box were for a double door, but I was able to find directions on the internet for a single door. All in all, I am very satisfied with the end product.

I never give bad reviews but if I could give this product zero stars I would. There’s CLEARLY no quality control check performed before shipment. First of all the holes for the joiner piece are not even close to level, second there’s no holes in the ends to mount it to anything, THIRD the door stops don’t even fit on the ends of the bars!! I couldn’t even modify this to make it work if I wanted! It’s a pile of steel trash as far as I’m concerned. I can only hope the company makes this right so I can remove this review.

I love this door! I'm a woman guessing by pictures what I wanted. I did measure my doorway, got what I needed as for the door. I assembled the door, very easy ( i'm 63 years old and did that by myself) . I got the door assembled and stained with not problems. Now putting on the rollers I had to buy spacers because the door thickness wasn't thick enough with the roller set I ordered. But my husband got the spacers, drilled the holes and everything turned out beautiful!!! We are getting old, moving slow it took us three hours to complete rollers/handle/ header board and hang the door. Like I said, I love this door.

Arrived quickly and looks good. Need to be aware of the nuts and bolts. The plastic anchors did not hold when the door was hung. Had to take it down and go get metal bolts and toggles. Floor guide really not adequate and was going to have to take the time to route the bottom of the door. Thank goodness I had bought a better quality floor device. Because of the need to replace the hardware this became an all day event.

I accidentally ordered a 20FT Single Door Kit and actually needed a double door kit. Homacer responded quickly to an inquiry and I was able to order the additional pieces needed to turn it in to a double kit. Hardware installs easy and works well. Also installed with Homacer slow close, a must have!

The parts seem to all be here, however a bit disappointed in the quality. The black metal paint obviously hadn't dried as it's still sticky to the touch, resulting in packing material and cardboard now stuck to the black track not something you'd want to have on your wall as-is. I'll need to buy goo-gone if that doesn't work the track will need to be refinished. P.S. very blotchy paint job for the track to begin with. Seems to have been a rushed job all-in-all.

I could not be happier with this product. It is the second I have bought but the first for double doors. They work great. Highly recommended.

I honestly wasn’t expecting the rollers to be as heavy as they were. Superior quality.I let them know when ordering that the door I built was thinner and they included the right sized bolts!Excellent customer service. So very happy with the company and product!

Quality parts, easy instruction. The only thing I disliked was the prescribed method for guiding the door - you are meant to router a channel in the bottom of the door - my door was constructed in a way that would not allow this. I am forced to find an after-market guide.

Love this, worked for what we wanted it for. Seems like a good heavy duty quality. Good instructions