Zeskit3.5mm Jack Stereo Audio Cable with Silver Plated Copper Conductors for Lossless Audio, for Speakers Headphones AUX Audio Recording (Gold)

This cable is sonically perfect in every way...As someone who has spent over 30 years listening to and performing on orchestral instruments in live situations, as well as spending over 45 years listening to, recording, mixing, and performing top 40 and original music, my ears are very calibrated to being able to detect what is truly accurate reproduction of what was originally performed. If there is anything that is not right about any aspect of the sound, then it's flawed and, to me, simply unacceptable...Let me say that this Zeskit cable is simply the most accurate cable that you'll find anywhere. It gets everything right as far as accuracy in every aspect of sound is concerned. From the total transparency and clarity that it provides; the tight, deep bass that comes through; the completely realistic timbre of every instrument being fully produced; reproducing the highest harmonics and upper partials that are present on the original source material; the ability to convey every detail and the subtlest of nuances that are present throughout the frequency spectrum; the openness and amazing life-sized 3-D reproduction of the sound stage; from the quietest of passages to the loudest, with complete realism always present, this cable is simply superior to any other...After receiving and listening to this cable for a week or so, and being so happy and satisfied with the accuracy of the sound I was hearing on each and every recording I listened to, I found I needed a 2nd cable for another system. Just out of curiosity, and taking advantage of the situation, I decided to try a different cable that others had claimed was also accurate and just as transparent and detailed from UGREEN. Of course, they hadn't compared the UGREEN to the Zeskit cable, so they wouldn't have any way to know which was better, but nonetheless they were claiming the UGREEN was sonically the best cable out there, so I thought this was a good opportunity to see for myself.Upon first listening to it, I found many things wrong and inaccurate with the UGREEN cable. So, realizing sonic qualities of cables and other components do tend to change and improve over the course of a break in period, I left it to burn in for about 12 hours, hoping these various flaws would smooth out and disappear.After the burn in period, the sound was slightly better, but still I was hearing over pronounced frequencies in the upper bass, lower mid-range area that bothered me, and that I found quite irritating. What I was hearing simply wasn't accurate, and it certainly wasn't as clear and transparent as the Zeskit cable was. In fact, with the accentuated frequencies caused by the UGREEN cable, there was a sense that other subtleties and nuances that were present on the recordings weren't able to be heard, and these aspects that provide so much enjoyment and what we interpret as realism in what we hear were being overpowered by the accentuated frequencies instead. Swapping it out for the Zeskit cable I already had on hand provided an immediate sense of relief, and a sense of enjoyment and pleasure with what I was hearing, confirming that the UGREEN cable was simply not what others were claiming, even some who said they had spend years as recording engineers. I'll certainly put my ears up against theirs any day of the week, as years of experience has always shown my ears to be more accurate and able to detect and pick out things that others weren't able to hear or perceive.So, I sent the UGREEN cable back, and ordered another Zeskit cable, knowing I'll be happy with what I hear through it with it's outstanding ability to transfer exactly what is on the recording with the utmost complete detail and with it's amazing clarity, and honest, true-to-life accuracy across the entire frequency range.If you're looking for clarity, transparency, and the most complete and accurate sound reproduction that you can get, then this Zeskit cable is the one you're looking for... and the one you will be the most happy, and satisfied with... ;-)

Although I am sure these are plated with silver, the gauge/strand count is insufficient to handle the higher voltages from other devices other than cell phones. I say this because running one of these from my LG Stylo 3 Plus to my Presonus Eris 3.5 Aux In, there is no issue whatsoever. However, when I hook up my Tecsun PL680 to the same Aux In, I get significant clipping in the mid frequencies, along with high frequency distortion. This does not happen with my stadard OFC cables, it only occurs with the Zeskit cable I received. Sound wise with the LG phone (low voltage device), the high frequencies are a tad more refined, but the low is slightly attenuated. The Eris 3.5 is a class AB amp with good sound reproduction at 4 ohms. I suspect, maybe someone else can confirm what I am experiencing with the Zeskit, that the thin gauge only exites skin effect when higher voltages are ran over it? This would be greatly diminished with weaving more strands into the wire to combat the skin effect, and I suspect skin effect due to the mid-high frequencies clipping/artifacting and the low frequencies unaffected. I rate two stars seeing how the cable is truly limited to solely cell phone (low voltage) platforms. If anyone is lookig for a good balanced cable, make sure you get a thick/high strand count OFC cable with a reasonable length (or various lengths so as to control resistance run). Or, if you have a solder gun, Litz wire combinations would be best. Update:Seller accepted my return, refunded the account, and is allowing me to keep the cable. Nevertheless, I will send it back, as I have no use for such a cable. If you are considering the Zeskit aux cable, unless you strictly plan on using it with a low voltage device, i.e. cell phone, you may want to consider other options.

Got these because oppo equipment reviewers recommended it for iPhone connections.I could tell a noticeable difference in clarity and punch for just a few dollars - what a hi go deal !Silver plated copper conductor makes sense theoretically and in this case practically. Gold plated terminals are excellent conductors

This silver plated cable is my to go cable, at close listening the timbre sound a tad brighter than my ikross braided cable and others a like which i thought was a very good cable until i tried this Zeskit Silver Plated. Its not thick or hard to manipulate and it actually works perfect on my Philips A5 Pro Headphones which came with a ridiculous coiled wire. I could not find a cable that would work with this headphone until this one. Great cable and smooth sound.

Excellent quality cable and the small diameter plug housing fits nicely into the hole for the cord on my Sony cans where many other cords wouldn't. The old cord was getting old, affecting the sound quality. This cord made them sound like new again. Would definitely buy it again.

Constantly Buying New Replacement Aux Cord For My Car Every 6mos or So, I Tried These From Amazon.com and So Far These Have Been the Best Set Yet. I've Purchased At Least Half a Dozen Aux Cords Of Various Lengths/Brands In The Past and So Far These Have Been The Best,...

I was looking for some new headphone cables for use in the AUX in in my car. I recently got a new phone case (Urban Armor Gear case- Love!) but the my stereo plug was too big to go into the earplug port in that case. The Zeskit came nicely packed and is very well made. The silver end is nicely tapered and easily fits into this port. The right angle plus on the other end fits nicely into my AUX IN port. The cable itself is made to be tangle free and it works.The sound is very good. Just what I needed.

I love these because I prefer the angled jack more than the straight on ones. But the housing around the straight jack is a wee bit big and won't fit into my skull candy hesh headphones.

Very thin and don't inspire confidence that these actually do have silver plated wire or will last. Photo makes these look better than they actually feel in my view. Buy an AudioQuest or QED lead you'll be guaranteed satisfaction with those.

Piena compatibilità con le cuffie Sony MDR 1A. Il jack dritto entra alla perfezione nella presa femmina sulle cuffie, grazie al piccolo dentino al termine dello spinotto, caratteristica questa comune a poche cuffie. Fattura identica al cavo originale nello spinotto ad L e nel cavo in gomma, anche come elasticità. Esteticamente diverso lo spinotto dritto rispetto al cavo originale Sony, ma molto più elegante.Da tenere presente che il ricambio originale Sony costa quasi quanto le cuffie ed è difficilissimo da trovare.Nessuna perdita di qualità audio rispetto all'originale. Nessun difetto costruttivo. Nessun gracchiamento o perdita di segnale durante l'ascolto.Speriamo che duri nel tempo.

Il prodotto è arrivato in una scatola raffinata che conteneva persino un buono da 10 euro per un acquisto superiore a 29 euro per una camicia.A parte questo particolare, il cavo corrisponde perfettamente alla descrizione ed è arrivato con più di 10 giorni d'anticipo.Mi sembra di buona fattura sia negli attacchi sia nelle guaine esterne di protezione.Inserito nel mio smartphone p8, ora ho la possibilità, in modalità aux, di godere di tutta la musica online e presente sul dispositivo nonché di parlare in vivavoce in auto godendo di un'ottima qualità del suono.Lo consiglio vivamente!

車で使うので、片方がL字なのは大変、便利です