LINKUP - Ultra PCIe 4.0 X16 Riser Cable [RTX4090 RX6950XT x570 B550 Z690 Tested] Shielded Extreme High-Speed Vertical Mount Gaming PCI Express Gen4 | Reverse GPU Socket (23cm) Designed for ITX

I've had issues in the past with PCIE cables breaking but this one seems solid and well protected.

I got this to replace the stock riser cable in my SSUPD Meshlicious after upgrading my RTX 2070 to a 4070.With the old cable I had poor performance in games and the system was pretty unstable. With the new cable, it's solid as a rock. More money than I would have liked to spend on a cable, but it solved my problem.The mounting holes with the correct spacing for the Meshlicious seemed a little bit undersized for the existing mounting screws, but it installed ok in the end.

Had to replace stock riser in my FormD T1 as it wasn’t compatible with my Gigabyte A620I AX motherboard.This is the 19cm version and it fits perfectly but you have the bend as close to the motherboard edge as possible.Working well so far no issues.

So I bought six cables in a variety of lengths and right angles or not. Mostly because I'm too lazy to measure carefully and I knew I could send the old ones back.Total cost. Over 1000 quid.Short story. Only 1 of the cables actually worked as a PCI v4 cable. The 15cm straight cable.None of the rest including a 50cm cable that I was using to support a 4nvme raid card in a 4x4x4x4 configuration - 4 full lanes didn't work resulting in my assuming it was one of my nvme cards that had failed and coming 20 seconds from putting a new nvme card in and rebuilding my (precious) array.None of this would be so bad except the fact it cost 260 quid...Terrible quality. Helpful Amazon though as always.

Excellent build quality and appearance. Thank you

I am getting x16 PCIE 4.0 speeds (per GPU-Z) using this riser cable. I don't know why it's so expensive though.

Works like a charm

I had to drop to Gen 3 speeds as at Gen 4 the display would drop. Returned and went back to my older Gen 3 cable, rebuilding my ITX sandwich ITX build twice as a result. Maybe I got a bad copy.

works perfectly with my rtx 4090

It is the best cable.I've been suffering from ADT cable compatibility issues, and I've been assembling and disassembling for a year without knowing if it's a cable issue.Not long ago, I found out it was a cable compatibility issueI inquired about the product's website and purchased it after receiving recommendations for cable specifications and products that fit me.After replacing the cable, surprisingly, all the problems disappeared.Even though I am not good at English, the counselor responded very kindly and now I am very satisfied and using my computer.Thank you, George

You will be future proof with pcie 5.0 support. Take it and enjoy it

Works well for my gpu. Very rigid.

New 5.0 cable installed in a Jonsbo A4 mitx case. After working with Linkup rep, the correct length to buy is 20cm. I haven’t tested compatibility with mobo yet, but construction quality looks good.