Ford Replacement Key Fob Shell Case Cover Smart Keyless Entry Remote Blank Key Fit for Ford Edge Escape Explorer Focus Flex Taurus Fusion Lincoln MKS MKT MKX

Very good solution to the worn-out Fob! If the circuit board is still good but the contacts are swarmy this is the fix!

Save your money with this excellent item

Purchased shell only - no chip - easy swap of internals and physical key - easy to snap together - works perfectly.

The good: This is a replacemente shell for the original key. We have a 2013 CMax Energi Plugin. I was able to disassemble the original key and move the battery, circuit and contacts to the new shell and it worked perfectly. No need for reprogram or expensive trip to the dealer. The not so good: the quality is not as the original as it feels lighter and the button feel less durable but for the price i cannot complain. The process: I am an Engineer but as long as you are fairly comfortable with opening and closing gadgets, then you should be able to do it without any problem. In my case, my key spent too much time on my bag and the button have been pressed to hard to the point that the key will randomly press the button and unlock the car or bring the windows down. I opened the original key twice and tries to rearrenge the contacts from the button, however i knew that they were too eroded to save, so i looked at this shell replacement which came with the new buttons and contacts (exactly what i needed to make the key new again) How to do the transfer: 1) Pry open your old key through the metalic side. Dont be afraid as you wont break it. Just use a small flat screwdriver. 2) Once open, take the clock battery out. 3) Take the metal that holds the battery in place out as well as you will need it. Careful not to bend it too much. 4) take the small board from the other side of the key. Make sure you have some bracelet to discharge your body to avoid burning any component. Or just hold it with small pliers. 5) remove the plastic case embedded on the circuit. 6) (optional) use a bit of rubbing alcohol to clean the contacts on the circuit board. It doesnt hurt but do it with some qtip and alcohol and very careful. 7) open the new shell. 8) place the plastic holder on the circuit 9) place the board on the shell 10) insert the metal piece on the other side of the shell and then set the battery in place (make sure you dont invert the position of the battery) 11) close the shell 12) transfer the physical key from the old shell to the new shell. Or just make a copy of the physical key on a normal locksmith place (it comes with a new blank key) Close and test. It should work as new.

très bonne achat