Question 1

Whats the difference and purpose between the starting line and the finishing line?

Accepted Answer

Starting line is an entry level, economic set. Finish line is made of better materials and designed to be a production gun, while the Starting line is good for hobbyist, occasional use. I have had a Starting line set for 8 years, painted approx. 50 cars, and they are still spraying like new. Keeping ANY paint gun cleaned and maintained will make a world of difference.

Question 2

What is the CFM recommended for these guns?

Accepted Answer

i have 10 cfm at 90 psi i shoot no problem and 25 psi at the gun if you have a large tank you could paint with a 6 or above cfm at 90 psi

Question 3

Finish line vs starting line kit ? Want decent results keep reading mixed things about either. Suggestions? Basisc 2k priming, base, clear

Accepted Answer

I have used the starting line kit to spray some very difficult pearl orange base coats.  It performed excellently with no blotching or tiger stripes. Of course I have been painting custom cars for 35 years and know how to spray control coats.
I do not use my good guns to spray primer, I use cheapo H. F. guns to spray polyester primers and epoxies.  Base coat and clear coats need a different size orifice but you can get by with just one if you know how to adjust your guns properly but switching out the fluid tip and needle is easy enough. Modern clears are pretty thin these days.
Which ever set you buy test each gun and tips as soon as you get them (even cheapo guns from H. F.).  Use solvent and adjust the gun and spray it on cardboard.  If you get a nice pattern it is a good gun, if it is heavy on one side or the other send it back.  You cannot adjust that out!
Having a large gun and a smaller gun comes in way more handy than 2 guns of similar size.  Make sure you take your guns apart right after each use and buy a squeeze bottle for solvent and a cleaning kit.  ALWAYS put the gun back together after cleaning and only snug everything up, don't over tighten.

Good luck

Question 4

Is there a certain way to take off the fluid tips? Ive tried holding the trigger while untightening but the tips wont budge on either gun.

Accepted Answer

Same problem, did come off but suspecting dried paint soaked briefly in lacquer thinner by putting several drops in where the cup screws on, point nozzle downwards.  Be careful if you do put gun in vise, seems to me possible to break body with too much force sideways.   Also lacquer thinner may compromise needle packing so not too much, point nozzle downwards leaving needle in place to keep things closed.  Yeah, better wrench wil help, think it is 13mm.

ASIN	B000KSTFJO
Best Sellers Rank	#120,001 in Automotive ( See Top 100 in Automotive ) #128 in Body Repair Paint Spray Guns
Brand Name	DeVilbiss
Color	Factory
Customer Reviews	4.4 4.4 out of 5 stars (926)
Global Trade Identification Number	00587010234248, 00658701023424
Hose Length	1.5 Meters
Included Components	StartingLine HVLP Gravity Spray Gun Kit
Item Dimensions W x H	5"W x 5"H
Item Type Name	StartingLine HVLP Gravity Spray Gun Kit
Item Weight	5 Pounds
Manufacturer	DeVilbiss
Manufacturer Part Number	802342
Manufacturer Warranty Description	Manufacturer Warranty
Material Type	solid
Maximum Pressure	30 Pound per Square Inch
Model Name	StartingLine
Model Number	802342
Power Source	external air compressor
Recommended Uses For Product	Painting
Style Name	Gun
Tank Volume	600 Cubic Centimeters
UPC	587010234248 658701023424

802342 StartingLine HVLP Gravity Spray Gun Kit, 2.7, Factory

Details

Details

Description

Specifications

Common Questions