BETOOLL HW9008 Golf Cart Folding Side View Mirrors

I needed to add a rearview mirror to our EZGO RXV. I ordered a single rearview mirror, designed to mount in the center of the cart, at the top of the front window. Unfortunately, the one I purchased just d in d not fit in my cart, no matter where I tried to place it. When I saw these sideview mirrors by BETOOLL, for only $10 and read the very positive reviews, I decided to give them a try. I wasn't disappointed. Out of the box, they seemed sturdy & well-designed. The instructions were very straightforward. 1. While sitting in the driver's position, have someone hold one mirror against the vertical frame of your cart to determine correct placement. I found that exact placement wasn't critical as the mirrors are fully adjustable. Once you place the first mirror, measure and mark the mounting location. 2. Using a center-punch, position the first mirror in it's mounting location and punch the spots where the two mounting bolts will go through the vertical strut that supports your cart's roof. 3. Measure and repeat for the location of the other mirror. 4. Using a carbide-tipped drill, drill all the way through the vertical strut (2 holes per mirror) 4. Without taking the mirrors apart, loosen the nut that runs through the center of the mirror so that the mounting bracket and mirror move freely. 5. Using the supplied mounting bolts and nuts, mount the firet mirror and mounting bracket to the vertical strut. 6. Repeat step 5 for the other mirror. 7. Using a socket wrench, carefully retighten the hut that runs through the center of the mirror until the mirror feels snug and you can adjust the angle of the mirror with little effort while also ensuring that the mirror stays in the place where you have to adjusted it. The mirror parts are plastic, DO NOT OVER-TIGHTEN. Tighten until snug but no further. 8. Repeat step 7 for the other mirror. On my EZGO, I found that the supplied bolts were just long enough to allow me to put a nut on, but not long enough for a washer. Once tightened down, I felt that even without the washer this should be adequate. The "ball & socket" design on these mirrors is not very sophisticated, but more than adequate for this purpose. The mirrors are easy to adjust to fit the needs of any driver and the convex design provide a wide field of view. These mirrors should fit ANY Golfcart or ATV. For the price, these are a STEAL. If you're looking for mirrors for your cart or ATV, look no further - just buy them!

Easy to install and good value for the money.

Good quality a reasonable price

Todo normal

We ordered these mirrors for our new 2019 EZGO Valor EFI. They fit well and are easy to install. I always use a center punch to divot the metal so the drill bit doesn't creep. If you don't do this, you may have an off-center mirror mounting hole. I mounted the mirrors with the bolts & nuts instead of the screws and both items come with the mirror kit. I used a 3/32 then an 7/32 bit to drill step up pilot holes for the 1/4 inch drill bit which was finally used to fit the mirror mounting hardware. The mirrors are attractive on the cart and work well at low & high cruising speeds. I would recommend these mirrors to anyone looks for a very affordable, high quality addition to their cart. I would also recommend using the bolts and not the screws which come with the kit.

These mirrors mount securely on the windshield upright bars. The instruction sheet says to drill a 1/8 inch pilot hole if using the screws. The screws provided would not go into the metal upright with that small hole. I ended up going up a couple of sizes to get the right size for the screws to penetrate the very strong metal upright windshield frame. To install the mirrors, it is advisable to remove the mirror from the piece that attaches to the upright. Install the upright without the mirror in the way and then, reattach the mirror. Once in place, the mirrors hold very steady. My pictures attempt to show the nut at the bottom of the attachment assembly. Tightening that bolt tightens down on strong hidden spring that keeps tension on the mechanism that holds the mirror in position. One I have adjusted the mirrors to where I want them, they stay in place. If my wife drives and needs to adjust the mirrors, she can still do so and the mirrors will stay in the new position. I bought these mirrors to replace a pair that attached without drilling or screwing into the upright. They closure mechanism didn't stay closed well on those, so I decided to try this option. It was well worth the little bit of work drilling the holes. I like the solidness of these mirrors much better. They provide true reflection of what is behind you when driving the cart. I've been a bike rider for most of my life and I do not like surprises coming up from behind. The cart's speed is below the normal speed of cars, so even though I live in a legally granted golf cart community and can legally drive the cart anywhere, I do not want to be that guy that irritates car drivers who want to go faster than my cart's top speed. This is a very reasonably priced safety item I will not do without. I highly recommend these for quality and price.

A must have for golf carts. Large and clear visibility to see behind you, easy to assemble…need a drill and tools to assemble. Low cost. Good quality.

These mirrors are made of heavy duty plastic with real glass for the mirrors. The mirrors can be swung in and out and is secured to the golf cart with two screws on each mirror. I like that fact that I can adjust not only inside to outside but up and down. This isn’t always the case with some other mirrors. There are no lights on the mirrors, just plain mirrors that will keep you safe when you’re using your golf cart. Highly recommended these mirrors. I have had them now for several months and they still look brand new and still functioning like day one!