GP-Ultimate 90x50x1mm Thermal Pad (TP-GP04-A) (1.0mm, Navy Blue)

I purchased these to change the thermal pads on my Zotac 3080 Amp Holo as my memory temps were hitting 104 to 106 degrees Celsius at 70% PL and 100 fans. After using these thermal pads my memory are sitting at 78-82 degrees. These are amazing results. One more thing due to cold weather in north india when these pads were delivered they were little hard but after keeping them near GPU they became soft. In the picture the small pieces on side are the old thermal pads. Kept them in case warranty is needed I will put them back before taking to service center

Reduced my gpu vram temps by 20°

My SSD ran into some thermal throttling issues, the heatsink I attached on it was not working well, thanks to the cheap thermal pads I used. I replaced the cheaper ones with this (I know it's for GPUs but I was desperate) and the difference was day and night. SSD never goes above 60 degrees even at high load. gonna get a thinner one to reapply for my GPU VRAM and controllers.

I've used it on motherboard components attached to heatsink of MSI GV62 8RE. So far so good. Review after one week : 1. Although under full load my laptop still goes over 90° (typical MSI Problem) but it's atleast a bit better now, it stays at 94-95° but previously it used to reach around 98-99°. So I'm seeing a 4-5° cooler now. 2. At Idle : Previously my laptop used to stay at ~75° at idle but now it stays around 35-40°. So a pretty considerable jump there. 3. At mild Usage : previously ~85°, now ~60-65° Note : I also used Kyronaut's Thermal Paste on CPU & GPU along with this pad on components attached to heatsink. So results are accordingly. Installation : these are quite easy to install, it was my first time using thermal pads and I didn't had any problem so you won't have any either. Size : 1 Pad covered all essential parts needed to be covered, except ssd. So yeah good size for heatsink installation. Verdict : Go for it, these are better than stock thermal pads company provides you out of the box.

The product is good. Shipment was on time. Coming to pads - For noobs - These are harder compared to silicon ones. Therefore cut it wisely with a proper blade, or else you can break it. I Used 3mm for backplate of my gigabyte 3080, Along with 2mm for front. Did wonders. The stock ones melted, and replacement reduced the temps drastically Thermal throttling is no more there. Went from 59-62Mh/s to 102 Mh/s

Fantastic performance, previously i used thermal grizzly pads on my zotac 3070ti amp holo. They had little to no effect on the card, as the memory temps consistently touched 104 under heavy gaming. But with GELID it doesnt go past 90 no matter what. Without a doubt the best pads.

I ordered the Gelid Solutions TP-GP04-d thermal pad for ₹1,149 from Scorpzon Trading Pvt. Ltd., but was very disappointed with what I received. The product was in poor condition — the thermal pad looked old and partially degraded, not at all like a new item. To make things worse, the size did not match the product description, making it unusable for my intended purpose. I also noticed multiple date labels on the packaging (03/25, 12/23, and 08/22), which was confusing and raised doubts about the actual date of import and product freshness. Given the high price, I expected a premium product, but this did not meet even basic quality standards. Not recommended.

It is great for RTX 30 series memory temp. problem mine just drops from 104C to 84 C. great product in good prices.