Single Universal for Chevrolet Corvette Jack Pad Adapter Slotted Raised Frame Rail Protector

The set of 4 jack pad adapters appear to be well made and worked beautifully for lifting a C6 corvette on my Mohawk System 1 lift. My lift arms are about 6” too long for the Corvette when fully retracted. As a result, the lift arms extend under the car past the lift points. The 1” thickness of these adapters made it so the lift arms didn’t touch anything but the adapter with room to spare. The stock C6 was also high enough to clear the lift arms with the pucks installed and there was no need to use wood under the tires to make room for the lift arms. Now I’m looking for a magnetic holder to keep these in one place attached to one of the lift columns.

I got the 4 pack to lift my Vette with QuickJacks and these worked perfectly. They are inexpensive compared to similar products and don't sacrifice quality. I prefer these over the aluminum ones that are available. If you're trying to decide, you really can't go wrong with these.

They fit well and work great! I have seen this item made by different manufacturers for over twenty years. This “hard rubber” material is the best I have seen. I used this product in conjunction with a “quick jack” lift.

Worked great use so many times Just remember to remove them because they make a awful sound falling out driving down the road don’t ask me how I know

These work great, though the pad is small for some jacks, it fit perfect for my hydraulic jack. Make it so much easier to jack the car up and o don’t have to worry about damaging the chassis.

My new C8 Corvette needs these so I can jack it up. They work exactly as advertised. Simple but effective.

Ordered these for my Pontiac Solstice since I had a less than honest shop keep mine after a service and then tell me they are nowhere to be found. These Pucks fit a Pontiac Solstice 2006-2009 and Saturn Sky perfectly and save you from damage from lift. A must have to raise these cars.

i thought i was ordering 4 not just 1