WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black

I bought the 31.5 model to mount a 27" monitor above a 32" monitor on my desk. This is the first monitor mount I have ever purchased and I am thrilled with the entire mount! The installation instructions were simple to follow. All hardware was clearly notated and packaged by part number. The mount holds the 27" monitor (which isn't all that light) perfectly above my desk monitor and is very stable. Adjustment is easy and effective and It doesn't wobble one bit. The cable routing clips work well and are literally a snap to install. I used the clamp mount but a screw-down desk mount is included.

Like many people during the pandemic, I was forced to work from home. Living in a studio apartment, working space is at a premium, so I can't afford to have all of my work space dominated by monitor stands. I went looking for a monitor stand that could support 3 or 4 monitors, in a stacked orientation, that clamped to the work surface. A lot of the competitors were up in the $100-$200+ range, and some of those didn't even have the table clamp. I don't know what person in their right mind would mount this much weight (let alone $$$) to a stand, and just rely on a stand with legs to hold it. But I digress. - Assembly. As others have mentioned, this stand assembles incredibly simply. Everything comes in 2 boxes (way smaller than you would expect for how big it actually gets), and is labelled in bags. The instructions are very straightforward, and without rushing, I had everything assembled in about 20 minutes. I then spent another 10 minutes cable managing. You could spend more time with this if you were more OCD than I am. - Positive Impressions. Other than being easy to assemble, I feel like a monitor stand should just sit there unobtrusively, which this one does.. I am running 19" monitors on top, a 15" monitor on the bottom right, and have the bottom left open, and am using my laptop in that space. I like that the cable management running vertically has a space for the hex keys that are used in installation. I don't feel like the stand is insufficient in terms of support in any way. I also like the way in which everything can be adjusted easily without too much effort. I also like that I have the option to through-mount this through a grommet. I can't speak to that, but I'm glad it was an included option. Also, the price was something you can't overlook. Build quality is excellent for the price. The monitors stay where you put them, and you can easily tilt the monitors as you see fit. The attachment mechanism to join the monitors to the stand is also pretty excellent. Things that could use improvement: - Cable management. As others have mentioned, by the time you get down to the bottom, you can't fit 8 cables through it. Also, the plastic clips that run along the arms are good when there's nothing in them, but they tend to flex a fair bit once you have cables running through them. Not bad, but could use some help. - Articulation. If you're using smaller screens like I am, you may have some difficulty getting all the screens to meet in the middle. This is due to the fact that the arms don't clear the hinges very far, and can only fold up to about 65 or 70 degrees. See one of the pictures. - Included spacers. I'm glad that they included spacers and screws, but the ones that they included were too big for my smaller portable 15" monitor. I actually had to cut the plastic spacers in half in order to get them to work. Another set of shorter screws would be nice. This is shown in the second included picture. Things to be aware of: - Won't flush mount to the wall if your desk is up against the wall. Because of the way arm-based mounts articulate, unless you're running the max size monitors that the stand supports (27" for this), you will lose some space behind, and subsequently, lose some space on your desk. Not a design flaw. Overall, I 100% love this stand. There are some minor picky points that I have, but I would buy it again. I also will probably buy another arm portion if I need to expand in the future, which you can totally do, as I am pretty sure that WALI sells the parts seperately. Highly recommend. If this review was helpful to you, please mark it as such, so that I can know that you appreciated the review, and that others who may have questions about this product can find helpful information.

This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.

For the price, I’m pleased with it. Overall, it’s a sturdy stand with quality machining. All the screws went in easily, poorly machined products have crooked holes or bad threads. The mount base comes with 2 types, standard mount for a desktops surface. The other one is for desktops with monitor holes/cabling drilled through them. All the parts are heavy gauge and I encountered no difficulty during assembling. There seems to be a tension screw for the tilt feature. I had to tighten the screw that holds the tilt joint together because out of the box, the monitor flopped forward hard. I had to be mindful while mounting it to the main arm so it wouldn’t slam into my glass desktop. The 2 arms that allow you to move the monitor forwards and back, left and right were a little stiff, I loosened the screw a bit on the main arm, at the pole. That seemed to be all that was required. I tried to loosen the bolt where the 2 arms meet, and it wouldn’t budge. I didn’t force the issue. The instructions were adequate for assembly without covering anything else, like adjusting the tilt bolt for the weight of the monitor. So, while I think this was a good mount for the investment, there are tradeoffs to mention. I’m accustomed to swinging my monitors upward and dusting underneath them. Height is fixed by a screw on this one. I was struggling to install the monitor cables when I realized you can tilt the bottom toward you until the top or the monitor hits the pole, or, until it’s sitting nearly flat like a table. Elevated several inches above the desktop. I consider this a Pro / Con feature. Where the arm ties into the VESA mount, the fit is a little sloppy. It’s not a safety concern but I can wiggle the monitor backwards and forwards at the outer edges “About ¾ inch “before feeling any resistance from the mount. Same goes for tilting. I don’t see this as much of an issue. Normally, I don’t foresee any outside forces acting in the monitor to create a problem. However, there’s room for improvement. The rest of the machining seemed steller. I have multiple computers in different rooms. 32” monitors are used as primary monitors with 32” to 23” as secondaries. I like mine roughly 1” above the desk. That places the top of the monitor at my eye level and the ideal viewing angle. I have fully articulated, hydraulic mounts on most of my monitors. Nice ones for large heavy monitors run $75 to $100 and up. I paid $36 for this one. The……… WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black. Amazon lumps the reviews of similar products together, so I specified which mount I purchased. I’m using this one on a glass desktop, I’m attaching it to the same point I constructed from wood for a different mount. It didn’t lower the monitor low enough either. So, the top of that mounting point is 4” lower than the surface of the glass top. Despite being that low, I didn’t actually need the 32” pole / monitor mount, the 16” model would have worked. There’s still 2” of pipe available above the arm. The 32” was on sale & I didn’t know if the 16” would suffice. The pole is a screw together 2 piece. I unscrewed / removed the other pole as it looked out of place in my dual computer setup. That leaves a hole in the top of the pipe / mount. I wish they included a cap for that. The top pipe has a cap but of a different diameter. I’d like to give it 4 ½ Stars but Amazon won’t let me. I’ve got to go with 4. Height adjustments with heavy monitors and an Allen wrench can present a challenge, it’s the nature of the beast and I won’t give it 5 stars for a few reasons. The sloppy VESA mount and loose tilt motion. No instructions that cover that, or if I was supposed to loosen the arm at the pole to improve motion. I would recommend this mount to others.

It seems to be a well made and sturdy unit. I've been using it for about a year now and I am still pleased with it.

This monitor mount is heavy duty! Sturdy, well built, and can mount two different ways. I have a keyboard stand with an upper shelf. I installed the monitor mount using a center slot I had cut into the shelf and it was a breeze installing it. My video monitor is small and I wanted it just above my music rack which sits toward the front of the shelf. I have a video system combined with my keyboard so I can watch movies while practicing. I highly recommend this monitor pole mount. Great value for the money. Monitor can be moved in a plethora of positions.

Solid, heavy duty and well made. I purchased this as I was adding a third monitor to my setup. So I had to choose between buying a 2nd mount that had one arm on it, or just replace my 2 arm setup with a single 3 arm setup. I'm glad I went this route. Very easy to assemble and it feels heavy duty. I've been using it daily for about 2 months now and it's held up perfectly. Zero issues with assembly and the instructions are well written. The mount options are solid and the metal is thick. Quality product at an amazing price.

I recently purchased an LG 32UN500 monitor weighing ~17 lbs. The included monitor stand was not great according to the reviews so I opted to purchase another stand. The WALI would take the load and it appeared solid. Assembly was straightforward. I opted to put a hole through the desktop for the stand. The monitor came with its own screws for the VESA mount so I used those. Once assembled I adjusted the arm height and tightened the arm to the stand so it would not slide. I then placed the monitor with the attached VESA mount in the arm mount and attached the nut to secure it all in place. Adjustments are easy with the supplied Allen keys. The stand allows me to tilt, swivel, and raise/lower the monitor height. Solid product that does the job it was designed to do at a reasonable price. Adjusting the height does require loosening the fastener so if that is required frequently you might consider another stand. One last point, the attachment to the desk requires so little space that I have regained all the space I lost to the stand for the previous monitor.