SSK M.2 NVMe Enclosure, Tool-Free SSD Enclosure Adapter, USB C 3.2 Gen 2 10Gbps PCIe MKey External Solid State Drive Case, Support UASP Trim for 2230/2242/2260/2280 (SATA NOT Supported)

The drive board proper slides out easily enough, but then you discover it is in fact a non-eculidean horror as it can never be refitted and when you examine it it could never have fitted in the first place

Prima product

Build quality is pretty good especially aluminum casing sturdiness. It is slide-in mechanism with external plastic latch - it rattles a bit though. Transfer speed is about 650/700 MB/s with Samsung nvme EVO drives on MacBook M1 and Windows10 laptop which is slower than some other 10Gbs enclosure I tried with same drives. I noticed that sometimes it doesn't write data completely even after gracefully disconnecting/ejecting drive.

This case for NVMe M2 solid state drives is very well constructed, made of aluminum on the exterior and plastic on the inside where the disk is mounted. Very easy to use, you don't need any kind of tool to assemble it and install the drive inside it, assembling it was a no brainer. It's USB-C port is Gen 3.2, works at 10 Gbps, making it a great alternative for cloning a drive, as I did. The transfer time for 290GB from the internal 3rd Gen NVMe M2 drive in my Lenovo Legion 5-15ARH05 to a new Western Digital NVMe M2 N 7100 SSD, was only about only 8 minutes! That's a great time and results may vary according to the source drive and the target top speeds, size of the data to clone, file sizes, etc. The enclosure got very hot while performing the cloning task, but that's a good thing, because the aluminum body acts as a heat sink for the SSD inside. The kit includes two thermal pads to help the drive get rid of the excess heat and transfer it to the aluminum enclosure. It's recommended to stick one to the control chips of the SSD and another to other chips. It worked perfectly for me. The kit includes also 2 cables: one is a USB-A to USB-C and the other is a USB-C to USB-C cable so you can choose the one that works for you, according to the type of port available on your computer. Once I cloned the old drive I installed the new one in my laptop and the old drive inside the enclosure. I formatted the old one and it's now an external unit I'm using to save stuff I don't want in any of the drives in my laptop. Awesome and really fast to transfer tons of data between computers with ease and reliability. I conclusion: I'm very happy with my purchase and would buy again if I need for another drive. THE CONS: only one thing they could improve: the lock mechanism for the plastic part, the one that goes inside the aluminum structure has to be checked twice to make sure it's really closed and it's not getting open while working or during transport, leaving the SSD inside exposed and risking damage. Anyway, just make sure you hear a nice click when closing it and make sure it's not getting open and you'll be fine. All in all, a great product for the price, but make sure you have the right type of SSD drive for this enclosure.

1 aylık kullanımıma göre yorumumu düzenledim. - Mac üzerinde 30gb'lık klasörü kopyaladığımda çok ısındı. (bu durum 1 kere oldu, cihazla birlikte gelen kablo sebebiyet vermiş olabilir) - SSD'yi yerine oturtana kadar kırılacak sandım. SSD'nin girdiği ağız kısmını dar yapmışlar. Biraz zorlamak gerekebilir. - Dış kasanın kalitesi güzel ama iç kasanın plastiği daha iyi olabilirdi. gene de 1 aylık kullanımda bir erime yada sıkıntı yaşamadım. - Usb-c/usb-c ve usb-c/usb girişli olarak 2 ayrı kablo koymaları güzel ama bendeki kablolar arızalı çıktı. windows üzerinde sürekli kopmalar yaşadım. elimde thunderbolt kablo vardı. bunu kullanmaya başladıktan sonra sorun ortadan kalktı. - Hıza gelecek olursa mac üzerinde 1.000 okuma / 870 yazma gibi bir ortalamayı gördüm. Normal usb de 32mb/s yazıyor saniyede. ilk aldığım gün iade etmeyi düşünüyordum ama kablo değişimi sonrası hiç bir sorunla karşılaşmadım.