MSI MAG CoreLiquid C240 - AIO ARGB CPU Liquid Cooler - 240mm Radiator - LGA 1700 Ready - Dual 120mm ARGB PWM Fans for Desktop

The product itself is great. Be mindful that the unit seems to be designed for being installed on the left side of your tower, though the only issue with it being on the right is cosmetic (the logo is upside down).Don’t trust Amazon’s review of returned products (the “buy used” section). I got a “like new” aio unit that had all of the screws open and loose in the package. A screw was missing, a washer was broken (snapped in half), and the product had scratches on the surface that touches your CPU (likely due to the loose screws).Thankfully, the scratches do not seem to have impacted performance so far. It’s good that I was replacing a faulty aio unit and had extra screws and parts from that I could use, otherwise I would have had to return.

tldr; it keeps my R9 7900x3d ilding between 45-50 degreesI wanted to build a a high end matx build and ive never custom water cooled or used an aio so this was my first one. My options were limited because I wanted a white aio and i didnt want to waste money on the more expensive one like from nzxt. I settled on this one over a deepcool and phanteks aio. it is compatible with am4 and am5 and intels mounting aswell. for am5 you just put the clips on the cooler, and screw it in, its very simple and intuitive. The pump is not the typical asetek design that sits above the cpu, this pump is mounted on the radiator. It could come with better fans but the ones that come with it work just fine for moving heat out.

I bought msi 240r v2 to build an itx.I put it on my old cpu r9 5950x(oc to 4.4ghz) to test, idle temp 36 burn it to 88-91,my cpu can oc to 4.7ghz but the cooler can't handle it.So I bought the other nzxt kraken elite 360 which is 3 times expensive than msi 240r,But the reasut is nzxt idle temp 39 burn it on 87-89 @4.4ghz.Msi did the same job but it is only 240mm, it is the good performance AIO RGB CPU Liquid Cooler.

Used on a 13900kf build. So far so good, might not be the best cooler available, but it helps negate substantial heat. Dont think it will last for the lifetime of the build, but it's working well enough for the time being.

Pretty easy to install and it gets good temps but I used Corsair tm30 thermal paste and not the one that comes with it so it’s going good so far

Wish I knew one could not customize the gifs. The cooler itself is high quality and the default gifs are not bad.

Keeps temps under 40 12900ks.. in mini itx !!

This review is for the 240mm MAG AIO. I got this to pair with my MSI Z690I Unity motherboard, everything is mounted in a Lian Li Dan H20 case (small ITX case designed with a 240mm AIO in mind)The good:- It's got great thermo performance. At full load (12700k) I am not breaking 70C. As I am writing this the CPU package is barely above room temperature- It's quiet, even when gaming at full blast you can barely hear the fan. In fact if you have an air cooled GPU, the GPU probably makes more noise at full blast than the fans. BUT... (more below)The bad:- The mounting holes for the screws were not very well stamped or drilled. I find screwing in the radiator to the case mounting brackets to be somewhat difficult - the provided holes seems just a tat too small for the screws and some of the mounting points "fins" were not stamped / bend in such a way that wasn't flushed. I find myself having to take a needle nose pliers to adjust a couple of the tabs to make the mounting works- The pump noise... not noticeable when everything is at full blast but when everything is quiet (like just browsing the web) that high pitch background whine from the water pump is quite noticeable and annoying.- Tight fitment for ITX builds... Like most other CPU AIO on the market, the tubes are feeding the CPU waterblock comes out on the side. This is a very tight fit on high end ITX motherboards. Expecially those with very tall integrated m.2 heatsink blocking the bottom. This one fits but the tubes were pretty much right up against the RAM. A top feed waterblock design like the Artic Freezer might work better for tight ITX builds.

refroidit parfaitement mon processeur après un an d'utilisation intensive

Bien

Consistently keeping my CPU at a cool 30 - 40 degrees at idle and around 60 under a heavy load. No complaints.

It's good for me

El sistema no es compatible con el socket AM5 aunque una de las imágenes diga que sí. Es un error de Amazon.