Product Specifications: Size: 5.3X3.15inch(135X80mm) Material: spring steel imported from the United States Surface treatment: special drawing Instructions for use: Cooperate with the soft magnetic sheet to be adsorbed on the hot bed steel plate. Cooperate with magnet to adsorb on hot bed. Fix it on the hot bed with dovetail clips. NOTES: (1)Please confirm the printing platform size of your resin 3d printer before purchasing (2)Don't scratch the surface to avoid deformation of the bottom surface of the printing model. (3) Don't bend the steel plate excessively to avoid damaging the surface coating. (4) Please confirm whether the magnetic force is enough to ensure that the steel plate is stable on the platform before printing with soft magnetic paste and magnet. (5)Please clean the surface of the steel plate before the first time printing to avoid surface stains from interfering with printing. (6)Don't use chemicals other than alcohol to clean. (7) Please level before printing to avoid nozzle scratching the surface. Package Included: 2 X light curing/DLP printing spring steel plate 2 X soft magnetic sheet 1 X Instruction
C**S
Resin might be eating away at the magnet.
I love this plate. I only question its longevity because the magnet seems to get a little rougher on the exposed sides after printing. I do print daily, so wear and tear is going to be a given. Other than that, no loss in hold and the plate itself is solid for use and flexible enough to take off.
E**Y
Decent
The magnet sticks well after the full 72h cure. The grid on the build plate will show up on your print though.
B**O
Really good
Pros: so much easier to get prints off, swappable plates, easy instillationCons: still gets some resin between plate and magnet, somewhat difficult to get the shole bottom off of larger prints... Still WAY easier than from the standard build plateDefinitely needed a z-spacer after instillation for my Photon and Photon S, but I had one print the spacers during the 72 hour period where the magnet was adhering to the build plate.Recommended them to friends already.Edit: here we are, some months later, and the corners on one magnet are peeling from the build plate. They've been fantastic, but I'm now concerned and shipping for a replacement so nothing gets damaged mid print.
S**R
Great but can't flex prints off too well
Products good the only issue I've had is the print bed is holding onto the print so we'll the flex will start to break off the supports instead if the base
M**X
adheres to the build plate very well
I tried a couple different types of these and this one sticks the best to the build plate, yet the flexible plate is easy to remove so you can simply bend it slightly to remove your prints.
S**1
Perfect!
Easy to install, great adhesion, easy to clean and prints pop off with ease. Leaps and bounds better than the other brand I tried. Currently using them on my Voxelab Proxima but plan to order a couple more sets and upgrade the rest of my resin printers to these plates.
P**1
Not enough pull with the magnet, 4 failed prints so far
I've had very good luck with my Photon 4 so far, so when I received this flex plate I opted to print something I already knew worked with the build plate alone. It keeps flexing and slipping, causing all 4 tries to fail. I've wiped everything down with alcohol multiple times, scuffed the flex plate with light sandpaper hoping the extra tooth would help. No go.Off to try another brand. I just don't think the magnet on this is strong enough to hold the plate in place. Everything slides off of it.
C**S
Much easier to work with than the scraper
It's so much easier to just remove the magnetic plate and bend the print off instead of scraping it and possibly damaging some of my prints before curing. This is a recommended accessory for anyone doing resin printing!I double checked that my printer was on a level surface and did a calibration with the magnetic plate and it works great!
Trustpilot
5 days ago
3 weeks ago