🔧 Elevate Your CNC Game with Precision!
The Grbl Z Probe CNC Z-Axis Router Touch Plate Tool is an essential accessory for 3018Pro, 3018pro-M, and 3018Max CNC engraving machines. With a thickness of 1.6mm, this automatic tool setter ensures accurate location of the working surface, making it ideal for PCB engraving. Lightweight at just 60g, it combines durability with ease of use, supported by a helpful video tutorial for quick setup.
| Manufacturer | WAM Direct |
| Item Weight | 60 g |
| Package Dimensions | 18.8 x 13.7 x 2 cm; 60 g |
| Material | ABS+iron |
| Batteries Included? | No |
| Batteries Required? | No |
P**R
Works well for me. G code for Z probe needs an M0 at the end
This works for me. As other have said it is light and doesn't sit flat unless I hold it down. The g code listed for the Z probe function needs a M0 command at the end. As it is, it leave the machine in relative positioning which (at least in Candle). Once I figured this out it works ok. The version I received has a plug on the pcb so i've had no issues with the wires breaking.
G**R
Much better then the 14 mm think one for 3018 prover
I don’t have the z clearance to use the think z probe that came with my machine. I tried to make one off of a aluminum 90 deg stock I had but too much wavy in the material due to the forming of the 90 deg from the mfg. was going to make my own till I saw these. Works great as I need a accurate measurement for my production parts so I don’t countersink too deep or not deep enough.
A**A
No incluye instructivo ni diagrama de conexion
No incluye instructivo ni diagrama de conexion
R**R
A little flimsy but it works as advertized
I have a small cnc with limited height in the z axis. This probe has a low profile so was what I needed.
M**.
Z-probe for 3018 pro.
Z-probe was shipped fast. Was touching a tool off within 10 minutes of opening package.Plugged in to A5, opened candle, went to Service/Settings and in the probe command line add on to the end G92Z1.64;G0Z2The Z1.64 is the thickness of your probe plate in mm. As far as I know this applies to the 3018 pro but might be same for others.Once that was done I clipped gator clip on tool and put plate under bit, hit the probe icon and it came down for initial hit and then a slower feed for 2nd check. Disconnected probe, set workpiece on table and tested an nc file quick.Worked perfectly
Trustpilot
1 day ago
4 days ago