BOJACK 1000 Pcs 25 Values Resistor Kit 1 Ohm-1M Ohm with 5% 1/4W Carbon Film Resistors Assortment

If you’re doing anything even remotely related to electronics—Arduino builds, ESP32 projects, random breadboard testing, or even fixing that cursed power supply from 2007—this resistor kit is a no-brainer.This BOJACK box is basically a resistor armory, and it’s stocked well. You get 25 common values, all 1% tolerance, from 10 ohms to 1MΩ, and all neatly separated in little labeled zip pouches. So no more sorting through a tangled pile of mystery bands that look like they were stored in a ramen wrapper.Each resistor is 1/4 watt, metal film, and I’ve tested a bunch with my multimeter—accurate within spec, clean leads, no oxide or cheap carbon junk. I’ve already used them for:LED current limiting (hello, 220Ω and 330Ω, my old friends)Divider circuits for analog readsLogic pull-ups and pull-downsSwapping values on a custom audio board for tone testingThey hold up to heat well—I’ve soldered dozens in place without one going crispy. And let’s be real: resistors are like paperclips in a tech workshop—you’ll use 2, then come back a week later needing 8 more.What I Like:Accurate, clean, no fakes—1% metal film means stability in actual circuitsLabeled bags = sanity preserved1000 pieces = you won’t run out mid-prototypeIdeal for students, makers, pros, and people who just hoard components like meWhat Could Be Better:Comes in a bag, not a case—pro tip: grab a small parts organizer if you're OCD like meWould love value markings on the resistors (but hey, that’s what multimeters and color code charts are for)

Just about everything you could really need

For the price can’t beat the deal

I love how many you get for the price!

This is a nice assortment of resistors, I've found no problems with quality or component tolerances, and component values are exactly as described.There are some standard values that are susprisingly absent, for example nothing between 5.6k and 10k ohms, or between 47k and 100k ohms. That said, between the included reisistor values and an assortment of various capacitor values, I've been able to get close enough to target -3dB points that I don't care about the small differences.One other issue I find is that these could be better packaged and organized. Each value comes in its own plastic bag, stapled together in four groups of 6 or 7. The bags do not fit comfortably in the included plastic box, especially after removing staples. I purchased another storage organizer for the resistors.

All the resistors I used measured as expected

Todo acorde según la descripción! En general son de buena calidad para el precio!

I only needed one resistor, but having multiple available was nice as learning how to solder to them had a bit of a learning curve. Make sure you tin the leads and don't let too much heat soak into the resistor body. I have a bunch of spares now, but they'll be of use in the end. When tested with a multimeter, the resistance was well within tolerance, usually under 3%. It was ever so slightly more expensive to purchase a kit versus a handful of the resistance I needed, but now I'll have some around if I have a future project.