Camera Desk Mount Stand, 11 Inch Magic Arm with 1/4" Screw Thread, 15.5-25.5 Inch Tabletop Clamp Mount Stand for DSLR Camera Rig/Ring Light/Self Broadcasting/Live Streaming/Online Working

I have a pretty thick table I needed to mount this to. Where nost boom arms don't really fit, this repositionable stand clamps on without any issue. The stand is pretty solid and holds all of my camera setups with no issue. I haven't really pushed the limits in terms of weight, but a standard DSLR camera with standard lenses had no issue being held at a 90 degree angle without any crazy movement. I've been using this setup to get nice table based shots, like game board action, and it's been perfect.

Range of motion is excellent. A little bit of a learning curve for getting it to sit all in the right place as you tighten it down, but after you get the hang of it, its fine.For the price, its a great desk mount.I use it with my DSLR (Nikon D3400) and it holds steady even with the telescopic lens on it.Haven't tried it with the telescopic lens AND attached 8inch monitor, but I don't think it will be an issue.

The "magic arm" section os great and works flawlessly. The actual stand is... not so good. The head is passable, but the base it attaches to is very flimsy and held on with a very loose rivet. It's worth the money, but be prepared to replace it not too long after purchasing.

This stand works! All the features were well thought out and the construction was excellent! The wide range of the clamp allows for mounting practically on any desk surface!

Just an awful design that allows for no adjustments. Requires you to lock the whole arm in place. To make any changes, you need to losen the entire arm, causing a full readjustment. It goes limp like a noddle, which makes getting the perfect angle impossible. The arm extending horizontally is maybe 5" long at best, so you have to have it hooked to your table directly overhead. Other swing arms I used were at least 2 ft long horizontally, and could be adjusted on the fly. The vertical arm is at minimum full foot tall too, so if you're trying to keep your camera close to your subject on the table, that's impossible. A really bad product overall, I should have returned it.

August quality! Exceptionally decorous packaging. Select delivery. Very pleased.

Clamp works , it’s low profile, and it holds my camera. Can’t complain about that.

The media could not be loaded.  I purchased this mount stand to use with my Sony A6500 in replacement of a tripod and it has satisfied this function well.Recommendation: (+) If you want something for a camera that will never move once setup, this will be a good product. (-) If, like me, you want to remove the camera or need to adjust it sometimes, check other products and see if there exists a product with the missing functionality.As you can see in the video, it takes up very little desk space and holds the camera's full weight with a LED light panel. It uses a dual ball joint arm to give flexibility in positioning. The arm mechanism is pretty ingenious where tightening the central knob applies pressure to the two ball joins mechanically and prevents it from moving. Not sure of the longevity of this system but impressive nonetheless.The desk mount does come with several adapters and I ultimately ended up using the ball joint and go into some details in my flaws section below. I will be purchasing a better adapter with a quick release separately now that I have used the product.Some flaws or features missing from this product:(1) Flaw: While stable, setup requires patience holding the camera in the perfect spot while you tighten. Since you are holding the camera, you only have 1 free hand to tighten knobs which is a bit of an annoyance.Having someone to sit in the frame (the position you want to be captured) is helpful as readjustment requires loosening either the ball joint adapter at the top or the whole arm via the central knob. This required several adjustments for me to set this up by myself.(2) Flaw/missing feature: No quick release or easy adjustments. Once tightened, accessing menus, and ports can be tricky if your desk does not have back-side access or your camera ports are away from you. In my tripod setup, I could loosen a single joint easily and pop the camera off if I needed to take the camera on the go or unplug/replug in cables.To be fair, I didn't know I would miss this feature until I didn't have it on this product. I will most likely purchase a proper ball mount with a quick release to put in between the provided adapters and my camera.(3) Flaw: Probably my biggest complaint comes from the connection point to my camera, while it comes with many adapters, none are disconnect friendly. The ball joint I show in the video requires small fingers to spin the silver metal pole into the bottom of the camera or when locked, the camera can be spun round and round to thread on the screw. Once connected, I do not have a fear of it falling. It is just a matter of flexibility when I want to move the setup or even take the camera down.Hope this helps some fellow content creators.

Klasse Produkt.

Do not recomend

I recently purchased this, and I was eager to receive it based on the promising images and descriptions provided online. Unfortunately, the reality fell short of my expectations - significantly so. The product is considerably smaller than depicted, which was a major letdown. It's a classic "wish moment" where what you see is not what you get.Beyond the size discrepancy, the design of the product, particularly the short handle, severely hampers its usability. The base gets in the way, making it difficult to use as intended. This design oversight has left me contemplating a return.I had high hopes for this purchase, but the gap between the online portrayal and the actual product is too wide to overlook. For potential buyers, I recommend proceeding with caution or seeking alternatives that have more reliable reviews and accurate representations.Rating: ★★☆☆☆ (2/5)I'm sharing this review in hopes that it helps others make more informed decisions and encourages the company to address these discrepancies between their advertising and the actual products.

The media could not be loaded.  Siehe Video

The plastic part to twist the tightness of the tilt is broken only after a few uses. Feels flimsy.Tried contacting the seller through Amazon, after going through 4 Amazon agents, NONE of them can help me contact this seller for a replacement. No contact info for seller found anywhere.Disappointed for this purchase with the price that is not cheap, the quality should be better.