Ultimation Beam Trolley with 5-Ft Unibilt Enclosed Conveyor Track - 250LB Load Capacity per Trolley, Adjustable Steel Rollers, Industrial Hoist, Gantry Crane Lift Equipment, Metal Sliding Rail System

This was part of my attic project. Unit is well built and the photo shows all the parts that come with it. Unit easily worked with a beam and two trolley. Unit is very well made and will last a long time. Very heavy duty and made to take heavy loads. Easy to move hoist with beam and trolleys. Glides to smoothly on track, with heavy load attached. Will need something to use as a trolley stop for each end of the beam, I used two C clamps.

Used this with two trolleys (for additional load capacity), made some brackets and bolted it onto a garage hoist; drilled and put a bolt at each end to retain the trolley in the track, works flawlessly. I'm going to be adding additional track with turn pieces.

Used two sets for a cantilevered gate. Welded tracks together for 10 foot run. It is solid.

I have experience building ceiling hoist for disabled people. If you decide to buy this set from Unibilt keep in mind that it is very heavy duty, and with the trolley weights 26 lbs. What you don’t know is that Track Hanger Clamp 8672 have to be ordered at Unibilt and cost $40 a piece. It is true that one hanger has a Maximum load capacity is 1000 lbs, but if you hang the rail from ceiling, then you have to spread the load. So for 5 ft long rail you need 4 Hangers total with cost $ 160. I am showing you how I hanged the ceiling hoist from attic, how reinforced the trusts and how I distributed the load. I recyclet the kit as scrap and accepted the loos of $106. I found a light duty kit in Amazon cheaper and easy to hang, with the same results.

Needed a place to store a snowblower and winter tires, this with a hand pulley worked perfectly.

Returned wrong size to big was not comparable

Heavy duty nice track and ball bearing roller