Ken-Toolyanzhen Tool Tire Iron Set, Small, One Size

I bought these to do lawnmower tires at a commercial tire shop, the shop improvised for smaller tires and it was a serious struggle. I bought these for myself to use and they turned a nightmare tire job into a piece of cake, now every time we get a small tire someone asks to use them.I don’t think I could justify buying them if I didn’t do a couple of them a day, but they make life so much easier having the right tool for the job.

I couldn’t do a 5 star on durability because I’ve only used them on garden tractors and they do flex a bit.

I used these to change the tires on my 350z. The tires were staggered at 275/30R19 and 245/35R19. The short sidewall made these an absolute bear to change on my own (i probably should have just paid a tire shop).I used these Ken-tool spoons along with a set of three generic spoons. The ken spoons both have more aggressive bends than the generics.The most aggressively contoured tool was absolutely Perfect for when you grab the tire and make the first pry to get it up over the rim during removal. I didn't find any other time when the contour of that spoon was useful .. actually, i literally couldn't use it any other time since it was too awkward.The lesser-contoured spoon felt pretty close to the generics i was using. I actually had no preference between it and the generic and would grab whichever one was closer.The grips on mine were hard plastic like in the picture, but unlike the picture, mine had a black and gray color. They felt well made and i was able to put a lot of force on them without any permanent bending.The grips weren't terribly comfortable. They have ergonomics like a screwdriver ... however, i truly don't understand why since you don't need to twist a tire spoon. This odd shape meant that you had plastic ridges digging into your hand. The generics i bought were much more comfortable when applying a lot of force. -1 star for this.The edges on these spoons weren't quite as smooth as the generics.Probably obvious, but start from the inside of the wheel (non show side). The spoons can (and will) damage the finish on the lip of the rim. If you're only working from the inside lip then there wont be any damage that shows. The inside lip of my wheels were pretty chewed up by the time I was done, same with the finish in the belly of the wheel.

I have changed hundreds, if not thousands, of tires over the years and all by hand. I learned early that a screwdriver was not the best tool for the job. Some time back I watched a tire shop break down a stubborn tire with a hand held hammer type bead breaker. I said "I got to get me one of those". When I found it, that was my introduction to Ken-Tools. I now have a number of Ken-Tool tire maintenance products: they are all made in the US of A and they all work superbly. For lawn mowers, motorcycles and other small tires, these little tire irons are just the ticket.I read other reviews before getting these and couldn't understand why some individuals didn't like the sharp bend in one of tire irons. I use it all the time to start the tire bead over the rim for both removal and installation. Even my big truck sized tire irons have both bends, one of each on opposite ends (Ken-Tool products of course).My only suggestion to improve the product is to have 3 tire irons in the set. It does take three to do the job as one is used the start and hold, and two more to "walk" ones way around the circumference of the tire.

I've had the same garden tractor for 20 years, along with a wheel barrow and a dump cart. Because of the thorny invasive bushes on my property, I'm frequently fixing flat tires. I've had some long struggles trying to get the tire back on the rim using screw drivers. I even gave up on one a couple of years ago and took it to Bell tire and asked them to seat the tire.I subtract 1 star because there are no instructions on using these tools. Why are they shaped differently? Before trying these tools, I watched a lot you tube videos trying to understand their use. I couldn't find instruction anywhere. The one hint I did pick up was: use a small C clamp on the edge of the rim as a starting point. It keeps the tire from slipping back up and over. It's like a third hand.It's still trail and error on how to use tools, but they sure beat screw drivers. With these tools and a C clamp, I've made short work of replacing a tractor tire and a wheel barrow tire so far this spring.

These irons work well for small lawn equipment tires. They make a hard job a little easier.I replaced 2 dry rotted 16x6.50-8 tires on a garden trailer using these tools. Demounting the tires was fairly easy. Mounting the new ones was harder until I figured the correct way to do it. Then the tires went on in a few minutes. Without the tools, it would have been even harder. I'm figuring when I replace the tires on the rider soon, things will be easier The tools are solid and did not bend. They grip the tire and rim firmly and give a good amount of leverage. There is one tool for demounting and one for mounting the tire. 2 of each tool are probably necessary. My master mechanic friend speaks highly of Ken-Tool. He said they make some of the best tire stuff. He expressed some doubt as being able to change small tires with these tools. Next time he comes over, he'll see my results. Using these tools is harder than using a tire machine. But at least it's a good workout.

I used these to mount ATV tires. Once you get the hang of it the process is pretty simple. I used a soap and water solution to lube the tires and rims. The first side is easy just put the rim on the ground and use your weight to spin the tire onto the rim. For the second side use one tool to pry the tire over the edge of the rim put your knee on it to push the tire down toward the center of the rim. This gives room on the rim to pry the rest of the tire around pretty easily. I did it with one tool. If you leave the edge of the tire out near the bead of the rim while prying you won't have enough space and will fight it the whole time.

great tools.

This tire iron set is the perfect size. Not to long. Not to short. Just the right amount of leverage. The quality is first rate. Good handles will give a firm grip. The spoons are nicely smoothed out.

great set for small tires