PVC Tubing 1/8"ID X 1/4"OD Flexible Clear Vinyl Hose 50 Feet for Food Grade

Anyone else sick of trying to get shampoo or conditioner out of bottles because the darn tubes used by brands are too short? I buy expensive hair care products and do I need to be punished by penny saving crap from manufacturers? Nope, not anymore. This tubing worked perfectly to extend the manufacturer's pump tube in multiple brand shampoo and conditioner bottles. A 2.5” section heated slightly with a lighter (heat gun or even hairdryer would likely work too) to make it stretchy and pull over the end of the pump tube and voila, longer and flexible end on the tube and NO MORE WASTED PRODUCT!!! Works great, no leaks, and easy to install. Didn't kink up or pop off. Just thrilled at the results. I literally have to flip over the bottles to coax the last 2"+ of product from the bottom of bottles and now I can just add a bit of this tubing and no more wasted product. I also bought a smaller tube and it worked perfectly on lotion pumps. A long length of this tubing at a great price will save me tons of money and hassle in the future.

I'm super happy with this vinyl tubing. I needed it for bleeding my motorcycle brakes and a few other DIY projects around the house. I needed a very large spool so I ordered 200 feet. It arrived well packaged. The vinyl tubing wall is nice and thick so you don't need to worry about leaking or kinking very much. Of course it can be kinked if you try, but it doesn't just happen in my experience. The 3/16 inner diameter doesn't allow for a ton of liquid flow but its good enough for my needs. Overall, I'm super impressed with this vinyl tubing and will definitely be ordering it again when I run out. The quality is great and the pricing is extremely reasonable for a bulk roll. The price per foot for this is waaaaaay better than most of the 20ft options on Amazon. So if you need a lot of tubing, this listing is a great option.

Vinyl tubing these days is pretty much all the same. You just have to try and find one of suitable hardness and pressure/temperature rating. I bought this strictly for the ID 1/8" and thicker wall to cut to short lengths for holding sections of brazing rods at variable distance from a work surface. (No heat is being applied at any time!) As expected I have to lubricate the rod slightly, slide into the tume and adjust the legth as needed. The tube hold them firmly but not permanently so relocating is easy. If you use this for liquid/gas transfer I cannot vouch for the result as I haven't tried that and probably won't. RECOMMENDED for value, pliability, and consistent size.

Nice, thickness consistent. Coiled without kinks. Clear in color, flexible in cold water and weather to freezing-in my experience at least. Arrived when they said it would.

Replaced the old drain line on my condensation pump after realizing it had achieved sentience via mold. I’m talking full biohazard. I half expected it to demand voting rights. I was aiming for 1-inch OD and 1/4-inch ID, but somehow ended up with this 3/4-inch OD, 1/4-inch ID hose instead. Classic me. Close enough, I figured. It's not rocket science, it's just a pump and a bit of water. (Spoiler: it works.) Getting this hose onto the pump outlet was like trying to put a sweater on a cat. It resisted, I persisted. Eventually, through a combination of brute force and questionable language, I got it on. Tight fit, but I assume that's a good thing, less chance of it yeeting itself off the pump under pressure. Once installed, it behaved beautifully. Flexible but tough, like a seasoned yoga instructor. It didn’t kink, didn’t complain, and ran across my basement all the way to the drain like a champ. No mold, no leaks, no drama. It fits the bill.

Great product

Late on a Saturday night, I found that my drain line from my furnace’s condensation drain pump had been kinked and was not letting the water flow to the drain location across the room. The big box boys only had 10 and 20 foot lengths - no the 30 feet that I needed. They did not have any in-line splices for 5/16” ID lines. I was able to temp one of their shorter pieces to the floor drain but it was right in the walk path to the bathroom. Not ideal. I could have ordered a longer length to arrive 4 days later. No thanks! I am impressed with the quality of the product and it was actually very workable. I was able to correct the original install problems and the new line looks perfect, does not leak and I am confident in the quality. It should last for many, many years! In all fairness to my original installer, the old line was 12 years old. I think this will easily outlast the bargain stuff that was originally put in place.

I bought this tubing to connect to a faucet diverter for refilling my Brita pitcher, and it works exactly as needed. The tube is clear, lightweight, and flexible, making it easy to route without kinking. It fits snugly on my 3/8” diverter outlet with no leaks. Plus, the 10-foot length gives me plenty of slack to move the pitcher around the sink area. Great quality for a simple setup—definitely recommend for similar uses.

Buena

good product

just as described--exactly what i needed

Excelente calidad y puntual

La manguera llegó en buen estado, muy bien empaquetada. La use para arreglar una manguera limpiaparabrisas y funcionó acorde a lo esperado.