TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, for 1/4"-20 UNC Fastener Size (Pack of 10)

Fantastic. I needed to mount a light 32" on wall with an articulating mount (total weight about 25 lbs), but only had one stud on one side to grab on to. So I used two of these anchors on the other side through drywall. I have never used these before. Just wow. This TV is not going anywhere! I was a little skittish pulling out my 1/2" drill bit, but it worked like a charm. Install took all of 15 seconds, it was that easy. Way better than the traditional screw toggles. I am impressed. Not sure I would mount something really heavy with these anchors, as drywall is obviously pretty weak. But for my application my TV install went perfectly. Highly recommend as long you know the limits. Nice product and so easy.

After researching how to install a grab bar in my rental's fiberglass shower enclosure, I decided to use these TOGGLER anchors and I made the right decision. The enclosure didn't have studs behind the walls, which ruled out traditional mounting, but these toggles worked perfectly. The key thing to know: they're extremely strong when installed correctly. I've seen reviews from people saying they don't pull tight enough, but that's simply a matter of installation technique. Once you screw on the bolt completely tight, the toggle wings fully expand behind the wall and create a rock-solid hold. You just need to tighten it all the way—don't stop partway. In my case, the grab bar is strongly secured with zero wiggle, which gives me full confidence. For anyone installing safety fixtures in hollow fiberglass or drywall walls without studs, these are an excellent choice. Just take your time, follow the instructions, and make sure to tighten those bolts all the way. Highly recommended for hollow-wall grab bar installations.

I bought these snap toggle bolt anchors after the anchors that came with my teen’s loft bed completely failed on both wall types we tried (firewall and hollow wall). These toggles were a total lifesaver. Installation was straightforward, and once the bed was anchored with these, it became incredibly sturdy. The difference was night and day. They held perfectly in the hollow wall, and the strength and stability they provide give me real peace of mind with a tall, heavy loft bed. The extra cost was absolutely worth it for the safety and durability alone.

Dateline: A Living Room Wall, Plagued by Inconveniently Placed Studs, Saturday Night. It is a cruel joke played by the ghosts of long-dead homebuilders. The perfect spot for your massive, 65-inch television altar is, inevitably, a vast, empty wasteland of hollow drywall. The wall studs, those crucial wooden bones you need to anchor your dreams, are spaced with a kind of malicious, taunting randomness. You are faced with a terrible choice: mount your TV off-center and let it haunt your every waking moment, or find another way. A better way. Enter the TOGGLER SNAPTOGGLE BA Heavy-Duty Anchor. This is not your grandfather's flimsy plastic drywall anchor, the kind you use to hang a small picture frame and pray it doesn't rip out a chunk of the wall. No. This is a serious, industrial-grade miracle of mechanical engineering. A tiny metal savior for your heaviest and most precious possessions. The hardware that comes in the package feels solid, the bolts thick and purposeful. The toggle mechanism itself is a work of clever, brutalist genius. You drill a hole, you slip the metal channel through, and with a satisfying snap, it deploys two wings of solid steel behind the drywall, creating a load-bearing surface where none existed before. It is an act of pure, load-bearing magic. And it is in that first step, the drilling of the hole, where we encounter the one, single, maddening flaw in this otherwise perfect system. The one thing that holds it back from god-tier status. They don't give you a drill bit. You are armed with this magnificent, life-saving piece of hardware, ready to defy the shoddy construction of your home, and you are stopped dead in your tracks by the need for a very specific, 1/2-inch drill bit that you may or may not have rattling around in your toolbox. The entire project grinds to a halt for a frantic, frustrating scavenger hunt for the one tool they inexplicably chose not to include. A cheap, simple piece of metal that would have made this a perfect, all-in-one kit. But once that hurdle is cleared, once the hole is drilled and the anchor is deployed, the result is a thing of beauty. My 65-inch television now hangs, rock-solid, in a place it has no physical right to be. It is a testament to the sheer, brute-force strength of these tiny anchors. They are an absolute lifesaver, a solid, reliable solution for the most impossible of mounting situations. The product is five-star genius. The failure to include a fifty-cent drill bit is a one-star sin of omission. It averages out to a very, very strong four stars. A near-perfect solution, haunted only by a trip to the hardware store that should never have been necessary.

I’m a DIYer so I try to find things that are effective and easy to install and these are both. I have a wet bar with wall shelves that requires a very strong hold when it comes to hardware (I’d imagine the mirrors and the heavy glass shelves were for alcohol bottles and glasses), and over the years the weak anchors (or lack there of) in the walls had failed. I bought these to put in the top two shelves hardware and some other types of anchors for the bottom two. As the top two shelves take more weight and stress, I felt that these would be a good solution and they definitely are. Drilling half inch holes with a little unnerving because it’s a pretty big hole, but that’s what these require so there’s that. I feel like this shelf will be up for a very long time. Installation was pretty simple. One of the bolt anchors did not deploy so I had to throw it away but that was OK- I had no problem with that- otherwise they worked just as advertised and I’m pleased that I have strong shelving once again.

These are extremely strong and the most versatile wall anchor that I have found. They work in 3/8" drywall, but will also work in depths of up to 3 5/8". It also requires a slightly smaller hole than standard toggle bolts. My house has plaster wall of various thickness. Some areas used a plaster board with metal lath and plaster on top, making for very thick, uneven and brittle walls. Standard nylon drywall anchors will not work. The wall chips out too much. Toggle bolts may need to be so long to get through the drywall, that the bolt itself won't fit in the wall cavity. Of course, with standard toggle bolts, you lose the toggle the first time you take the bolt out. With snaptoggles, you drill the hole, insert the toggle, pull it tight, and then insert the bolt, so their is not an issue with bolt length that you have when you have to have the bolt in when you insert the toggle with a standard toggle. I do recommend that you buy some 1/4" fender washers to use with these when working with materials that might not have a clean hole when you drill. That just insures that your toggle won't pull back through the hole. These things do have a downside, which I have come to terms with. Some of the toggles will break during installation. It is not a big deal. You can just use another one in the same hole. Still, it makes an already expensive anchor more expensive when you waste some. In my twenty pack, I broke 7. Part of that is because of my stupidity. The nylon zip part of this anchor does not provide any of the strength of this anchor. The strength is all on the metal toggle and the bolt. You do not need to pull that nylon zip super tight. Since I learned that, I am not breaking too many. Still, you may break some. One example of the pluses (mostly) and minuses of this product was when I tried to anchor my toilet recently. The flange bolts on one side were not holding. When I went to replace the bolt, I found that the flange opening for the bolt had widened out over time, so the flange bolts would never hold. I thought I was going to have to pull the toilet, and either replace the flange or repair it, then clean out the old wax ring, install a new one and remount the toilet. Instead, I used a snaptoggle. The first one broke, I think because the flange was not flat underneath, resulting in an awkward angle to thread the bolt in. The second snaptoggle worked like a charm. I finished in five minutes (ok maybe fifteen). Now my toilet does not wobble, and I did not have to go through the time, expense and mess of messing with the flange, wax ring and pulling and remounting a toilet. I'm fine with spending $2 or $3 in snaptoggles to get that done.

Good toggle bolt anchors. I use these or the plastic screw in type constantly. For lightweight stuff the plastic screw types are fine. For heavier stuff or different materials like stucco, these toggles are great.

Amazing product - completely worth the extra money. They're super easy to install.. Just drill a 1/2 inch hole, slide the toggle in and break off the plastic ends.. Bolts can be taken in and out without damaging the toggle. 4 toggles in drywall holds my 55 inch TV without hitting a stud. Great product

Bon produit, correspond à la description, rien a dire de très bonne manufacture.

Watched a bunch of YouTube vids, chuffed I managed to get this on prime! Worked a treat - needed to buy a 12mm drill bit but it held my tv mount to the plasterboard wall no problems! I even did a pull up on the tv mount!

Good product, used it mount my 65 in TV

Desconocíamos que existía un producto que pudiera fijar una puerta corrediza a un plafón. La compra valió totalmente la pena.

I bought these with the 3/16" versions. These are very helpful for mounting TVs and I would recommend using these over the 3/16" versions for TV mounts as they can withstand much heavier weight. I recommend not to over tighten the screws when you hanging your TV mount as you can break the back metal piece off fairly easy. READ the instructions very carefully as they can be easily installed incorrectly. It needs to be tight and flush against the wall so make sure you tighten the anchor part before breaking off the tabs. Also watch YouTube videos of others installing them so you get an idea how to install them correctly. I have used these to hang up many TV mounts and never had an issue with them.