Universal 9.5mm SATA to SATA 2nd SSD HDD Hard Drive Caddy Adapter Tray Enclosures for DELL HP Lenovo ThinkPad ACER Gateway ASUS Sony Samsung MSI Laptop

I replaced a DVD R/W in a Lenovo Thinkpad E540 with the Highfine Universal Caddy and installed a 1TB Samsung SSD as the storage device. Here are my observations: -- WORKS PERFECT: After installed , it worked perfectly first time. -- EASY INSTALL: Very easy to install. -- NO INSTRUCTIONS PROVIDED. No instructions needed. There is plenty of Utube and other helpful instructions online. -- NEED TO REUSE SOME PARTS: You need to save the metal tab on the end and carefully remove the DVD plastic bezel to reuse. -- UNIVERSAL BEZEL NOT A PERFECT FIT: It comes with a flat plastic universal bezel but my E540 laptop has a highly beveled attachment. While the universal bezel will fit, there is a large gap underneath and probably not good for the highly engineered air flow needed to keep the electronics cooled. If your replacing a DVD save the bezel to re-use. -- DON'T BUY A CADDY ON EBAY!: I purchased a caddy on Ebay and over several days had problems with random blue screen and rebooting. The contacts on the connectors appeared thin and dull. When I would flex the laptop buy picking it up with one hand the laptop would blue screen or reboot. -- HIGHFINE IS BETTER QUALITY: The Highfine caddy is subtlety different then the Ebay unit and the Highfine caddy SATA contacts look more robust, thicker with better quality gold vaporized on the contacts. When I pick up the laptop as mentioned above there were not issues with rebooting or blue screen. All around 100% better than ebay.

Putting together a LAB environment in my house to practice my skills and chase after a few certs. Purchased a used Dell r610 server, a couple hard drives and this CDROM/HDD converter kit from here. I wanted to take advantage of the sata port the cdrom was connected to, seeing that I wasn’t going to be using the cdrom for anything in the foreseeable future, and if needed, I have a external USB one just in case. Right off the bat, the Hard Drive Caddy Adapter worked like a champ. The Dell R610 had zero issues recognizing the SSD hard drive once I booted it up. Installation went pretty straight forward, with only one minor hiccup. The holes for the little plastic bit that used to secure the cdrom to the case didn’t match up between the Dell’s cd rom and the adapter. This wasn’t anything that couldn’t be fixed with a little nail and equally as little hammer. The metal casing for the caddy is pretty thin, little too thin is you ask me, so I had no issue driving a pilot hole into the back of the caddy to match up with the holes on the plastic locking piece. As for the overall caddy size, it was darn near identical in dimensions with the cdrom I removed from the server, darn near except that the caddy was a hair shorter in height, enough so that it left a noticeable gap when I inserted into the server. Not a show stopper, but still something someone might notice in a similar setup. This by no means affected the caddy in any way, the plastic locking bit was still ale to engage, and the SATA/Power cable (Yes I know this is not the right term for what being using on the server) was still able to connect. Overall, I was happy I spent the extra couple buck to utilize what would have been a wasted sata port on my server.

Works for extra storage in my HP Prodesk 600 G3 SFF

Feels like it’s made from scraps leftover from making other products, but works well, fits well, so what else can you ask for?

This caddy allows a quick increase in onboard storage for any laptop equipped with a DVD drive. My HP has a screw on the bottom of the case that allowed me to pull the DVD player out of the side of the laptop and insert the caddy with a new SSD that doubled capacity immediately and seamlessly. The caddy is well made and fitted the original DVD player plastic bezel perfectly. The single retaining screw fit correctly and secures the caddy solidly. A good value with quick and easy installation.

Buena calidad

This product is very cheaply made. I've ordered a couple of them now and they've all been flimsy and temperamental to install. The most recent one didn't work at all, and after opening it up, I found that it had a cracked PCB board and I had to get a replacement ordered. 2/3 working isn't bad but I wish they spent a little more time designing a sturdier product.

It fit my Dell Latitude E6440 good and the HDD is working well. The quality is good, they included everything needed and it was easy to install. Now I have my whole previous laptop as the D drive on my new laptop and that's very convenient for me so I am very happy with this purchase. There are screw holes in the bottom that will align with some threaded holes in your HDD. This comes with the screws and a screw driver to put them in the holes to secure the HDD. The plastic cover that came with this did not match the curvature of my laptop. I was able to just carefully but firmly pull the plastic cover off of my dvd drive and put it on this caddy by just pushing it on.

Es una buena opción para la expansión a un segundo disco duro, la instalación se complica un poco dependiendo de la ranura de la máquina en la mi tuve que remover el plástico frontal de mi lector de disco para que quedara a la perfección, si incluyera una tornillo para poder bloquear el mecanismo de acceso sería muy útil, ya que no lo incluye.

I replaced my Lenovo Z570 DVD drive with HDD using this caddy, it works fine. However, the hole for fixing the small bracket did not match so I have to make new hole for the screws. Also, the caddy thickness is not match (original 12mm, caddy 9.5mm). The original side cover did not match as well so I used the caddy cover and not looks good on the laptop as it has gap/opening.

Reasonable quality, cheap .. added my 500gb SSD to old laptop.

Creo que el pedido era desde Bélgica... me marcaba 3 semanas y llego antes de lo esperado ahora mi laptop ya tiene un SSD