ZdwCyl Clothes Drying Rack Wall Mounted,Laundry Rack Wall Wount,Drying Rack Clothing for Laundry,Retractable Dryer Racks,Wall Mounted Drying Rack Collapsible, Black, Sandy Coating,3z-b01

Over built. Great quality. Hoping the paint doesn’t chip off and start oxidizing. So we will see. But as far as function and saving space it’s absolutely killer. The mobility of it is as well makes accessibility extremely efficient and it tucks away nicely snug against the wall. It’s very well thought out. I’m impressed and that says a lot because I think Amazon is turning into Temu.

This gave me the opportunity of hanging clothes in my laundry room when I couldn't due to space limitations. I also love to have everything tidy and organized. Therefore, my previous traditional hanger made it look disorganized and stressing. Now I hang my clothes and when dried, I just move it near the wall and off we go. I would suggest it to anyone. It's easy to assemble, seems to be made of very high quality materials, it is rust resistant, holds many pieces and once installed it is super stable and expandable. I really loved it in its traditional white color. It has lots of stability so when you hang your items it won't wobble. The drying capacity is of several items. You won't regret it. I would suggest it to anyone

Wow! This really seems to be the solution for my small space laundry room. I just installed it and was able to flip it up out of my way to be able to get to my utility sink. It seems sturdy and I’ll definitely update this review if it ends up being otherwise. So happy I found it and can replace the old reel type that I had to duck under all the time. The only caution I would give is don’t use their wall anchors. It says to drill a 5/16” hole, but the flimsy anchors supplied just slipped right through. I was able to use 2 screws in a stud and then used EZ anchors to secure the other two screws.

Summary: the ZdwCyl Clothes Drying Rack come pre-assembled but requires some tools for installation level, drill bits, drill driver, hammer, screw driver). It performs the task intended. The frame is of sturdy construction. The rack has hooks for 18 items and easily holds more than a dozen pieces of clothing on hangers without problems. There is a little bit of sag to the joints such that the rack is not perfectly horizontal when fully extended that is visible with/without a weight on the rack. Hopefully, this will not lead to durability issues in the future. The beauty caps covering the screws holding the rack to the wall are too loose such that they had to be glued in or they would fall off immediately Pros: - Frame is of sturdy construction. - Installation instructions are clear and understandable. - Installation hardware included in kit. - Unit operates easily and has a low profile when closed. - Unit comes with a "Glue-On" Bracket and Adhesive included in kit. Cons: - Beauty Caps to cover screws fall off instead of staying with friction fit. Had to use a rubber cement type of adhesive to attach beauty caps. - Bracket sags at joints such that it is not perfectly horizontal when fully extended. This is irrespective of a load being put on the Bracket. The joints seem tight now but may loosen further in the future with use. When going through a laundry room remodel we wanted to install some space saving features. Among them was a clothes hanging bracket that folded against the wall when not in use and extended when needed. This ZdwCyl Clothes Drying Rack looked to be perfect for our needs. Installation of the rack was straight forward. Hold the bracket base against the wall in the location desired using a level to get the bracket straight. Mark where the screws are to go. Drill pilot holes in the locations indicated. Try to use a location where there was a wall stud to more effectively hold the ZdwCyl Bracket. Drill appropriately sized holes where wall anchors are needed then put in wall anchors. Attach ZdwCyl bracket with the included screws. Put beauty caps over screws on bracket base. Installation was quick and easy except for the minor irritation that the Beauty Caps covering the screws kept falling off until I used some rubber cement type adhesive to attach the Beauty Caps to the screws (Caps will come off fairly easily in case repair is needed). Aside from the hassle of finding the adhesive and gluing on the Beauty Caps, the total installation time was less than half an hour. Most of the time was in set-up and clean-up from drilling holes in the sheetrock. In conclusion, we really like this ZdwCyl Clothes Drying Rack. Except for a couple minor issues the rack is great and performs its function exactly as intended. I recommend this rack. Note: The ZdwCyl Clothes Drying Rack comes with an optional attachment to allow the rack to be attached to the wall using an included adhesive. Unless the wall is of stone, concrete, metal, or other structurally cohesive and strong material, I highly do NOT recommend you use the method of attachment. While the adhesive can be very strong, any load on the rack when extended would have a tendency to tear the paper facing when installed on a sheetrock wall. The rack would just rip off the sheetrock and damage the wall. Screws are needed to anchor the ZdwCyl Clothes Drying Rack securely to a sheetrock wall.

Awesome and convenient rack - perfect for laundry room!

This collapsible clothes rack is incredibly well-made and engineered. Super versatile and collapses into a very compact size to move out of the way. Extends really far and made of quality material. Incredibly impressed with this and I can see that this will be a game changer for drying clothes in my very small laundry room.

This is easy to install. Works well in my small laundry room and gives plenty of room to hand wet or dry clothes.

Overall, the product does its job. However, I have a few gripes. The biggest one is that my hangar bracket came with the hole seemingly drilled in the wrong spot, as the mounting holes do no line up. They were an entire hole diameter off, as seen by the missing paint where the securing screw bottomed out to the wall mount bracket. That wouldn't have been a big deal because it appeared that it would tighten enough to provide a clamping-type retention however, the metal of the bracket is some soft aluminum, so the threads strip right out with just mild torque, so now that part is useless. Also, the paint is not adhered well, it flakes off under the locking latch as soon as you start rotating it. The manual isn't great, doesn't quite match the build, for example, it mentions 6 mounting screws but mine has 4 holes and 6 screw provided. It also doesn't tell you how to adjust the locking mechanism, even though it comes with an adjustment allen wrench. Guess they just want you to figure it out. Lastly, the telescoping end tolerances are waaaayyy too loose. When it telescopes out, it sags and is very loose and wobbly. The rest of the assembly is pretty secure, so the telescoping part feels like an afterthought. All in all, it works for what we needed, but not a well rounded product for those that want top quality in their home.