STEREN RG8X Coaxial Cable 50 ft, CB Coax Cable with PL259 UHF Connectors, Male to Male Low Loss 50 Ohm for HAM Radio, LMR400 Cable, Antenna Analyzer

good quality . No issues with operation.

100 feet twin shield foil and braided, cpvc cover with a ton of flexibility copper center.this is a GREAT CABLE for under 100mhz. CB'ers take note, it's fine for 1500 watts. and low loss center copper is braided. dont listen to the "You need 9913 or RG 213" no, you really don't. I have an imax 2000 on some thin radio shack 18 year old trash coax that I routinely fire 1000 watts thru and talk 1500 to 6400 miles on 10/11 meters. and this cable is far superior to that. low loss, when I swept it i got the least loss from 3 to 58 mhz (.2db to 1.4db @ 100 feet) for HF work this cable is actually pretty good, and 18 bucks for 100 feet is 18 cents a foot. with molded PL 259s. .take a look at at the 50 feet pkg being MORE money, buy this, cut to length and solder on the end and you'll have a backup cable too. or enough to do a few vehicle antennas.This RG8X is excellent HF cable, not so good for VHF/UHF as it's very lossy above 130 mhz, and I use LMR400 Exclusively for anything above 100mhz...LMR240 is also an option, but remember the LMR cables have a solid center conductor and it will break if you swap radios often, LMRis very inflexible and will crack internally without warning if subject to stress, wind movement or extreme cold. so use a pigtail of a flexible wire to avoid moving the LMR.this stuff is well priced, good quality and delivered in 1 day. ordering more.5 stars are warranted

Great quality and price ....

Been using a 75' cable for about a month and it has been working well, no complaints. I'm using it in between a 20w transceiver and a coil loaded vertical.

I bought a second of these after having good success with one I'd ordered before. Both performed well and the price was right. But after only a few weeks a connector on the second one came apart. I had taken good care of it. On the bright side, I can see now the center conductor and braid are copper. Another reviewer said their copy didn't appear to be copper, but this one clearly is. I'll probably use the broken one on a future direct solder antenna project. Given the low price and copper construction I still think it's worth taking a chance on this for non-critical projects.

This cable is fantastic! It's as good as they claim it is. Totally 1st class. Double shielded with copper braid & foil, center conductor is 100 percent copper. Pl259 on both ends. It don't get no better than this👍

Worked perfectly.

This is a pretty good cable with good connectors on both ends.

I'm using it right now, looks to be a bit thicker and better quality than some of the others I have bought.Using it with 100 watts, Yaesu FT891 6-40 meter bands

Good quality and delivered promptly

Was surprised that outer jacket was so stiff, had to be careful not to kink cable but it did work good for ham radio project

Seems to work ok for 6ft but it definitely has some steel in it cause I can stick a magnetic to the cable

Baught it for my 2 meter radio. Seems to work well.