Azza Sirius CSAZ-206S Mid Tower Computer Case, Black

so far the case has fit all my components quite nicely and given me plenty of room to upgrade my system and run cables and such ...pros :spacious designremovable ssd tray'scable management loops and holes are in good placesnice cooling optionscons :up top there appears to be space for a 2x 140 mm water cooling radiator but its only cut for a 1x 140 mm water cooling radiator could be modified but just a nit pick for meon the front panel there are two USB ports available but a space for a third port is clearly visible but not exactly usefulthe front fan doesn't appear to be mountable at any other point on the case due to a lack of screw threadsthe motherboard tray doesn't have screw mounts labeled for the various sized motherboards the case can have installedoverall a very nice design and i would think anyone looking for an easy to mod light mid tower case would be very pleased with it but i think for the average person who just wants everything out of the gate it might need a few small changes that i don't think would cost terribly much ... namely swapping out the fan with one that could be mounted at other points in the case and drilling out the spaces up top so that if someone wanted to install a 2x 140 mm water cooling radiator they could without having to break out a drill and do it themselves .. finally labeling the motherboard mounts and you've got a case the average person would be very capable of putting to its full potential ... i would like to see it have at least as an optional accessory a third USB up front where the slots are clearly available but its not a big deal

After receiving it, I would like to say something positive, but I can't. Before opening the well packaged box withing a box, i could hear rattling and knew something was wrong. After carefully taking it out, the entire front piece was broken off. The 5 plastic tube rivet things were all broke and parts of broken plastic were everywhere. On top of that, I'm pretty sure other internal parts were broken. Also, the front fan is ridiculous because it is blocked by a metal plate behind it, rendering it useless. Get something else. For your sanity and money.

This case arrived open with potentially missing parts. I won't base my review entirely on that, but I will base it on this:1) The metal is quite flimsy. After I returned this case I bought an NZXT 210 source that is now basicly setting the standard for how solid a case ought to be at a low price, and this one doesn't cut it.2) This case does not have USB 3.0 as advertised and it only has one 120mm fan. Apparently this a problem with this case all around. Beware of false advertisement with this case and don't expect any of the stuff that higher priced cases have.If you can get this case for 20 bucks with a rebate, it still might be worth it; but, bear in mind that you may end up returning it for a replacement.I highly recommend looking at the NZXT 210 source if you're interesting in a budget case. It doesn't have the LED lighting, but it's a very solid case for almost the same price and you can get it windowed.

The case is good, able to route the cables behind the side panels to have a better airflow.Reasonable pricing for such casings.Reason why it got 3 stars, though I wanted to rate it 4.1. It would have been good if the case can be lengthen higher by 2 - 3 cm. The very first slot has no opening, that means I can't put in any add on cards on the PCI slot. There is a cutting there, but could not be removed, so unless I put in cards that does not require any external connectors or securing them by screw, the slot is as good as useless.2. The top of the case looks like it could be used to put a water cooling block with 2 fans. Bought it on this assumption. Pictures were not clear, but has only opening for one. My motherboard was designed with a 12V power connector nearby, which prevents the radiator from sitting properly. If only more allowance was given.3. The attached fan does not serve it's cooling purpose, more for lighting up the front. Can't feel any air from the fan. and If the front plastic cover is removed, you can see the metal case blocking the airflow. Anyway, even after removing the fan, can't even feel the air.4. The front panel looks like it has the option for another USB port, but was not provided. Since motherboards now have multiple USB headers, I soldered one more header to the PCB, cut off the plastic covering the hole and attached all the needed cables.* At the same time, I desoldered the 2 original headers and replaced them with the "Blue" colour commonly used for USB 3.0. Got another USB 3.0 cable to 9 pin male header and connected the cable. Now the front panel has 2 USB 3.0 and 1 USB 2.0 ports.Overall, there are sufficient screws provided for the case and looks solid enough. For the price, can't expect much.