SSUPDMeshlicious Mini-ITX Small Form Factor (SFF) Case - Full Mesh Side Panel with PCIe Riser Cable - Tool-Free and Easy Accessibility (PCIE 4.0 Riser Cable, Black)

It will support a 280mm AIO without issue. With that radiator in the front for my CPU and my video card in a vertical position behind that, I don't get the heat soak I got with the shoebox configuration where my power supply and video card were both under the 240mm radiator pushing the hot air right into the radiator during prolonged use.It supports my 3x thick Very Long RTX 3080Ti easily on 3x mode. It can support a 4x thick GPU by taking that height from the CPU side, I don't think it would be an issue.I wish I could run a liquid cooled 1 slot video card on a 280mm radiator and the cpu on a 240mm aio and a 15mm thick 120mm fan on the bottom blowing cool air up into the chassis. Either of these would be extremely easy to accommodate in the next version by including brackets.It is a little larger than I would have liked at around 15L. It would also be nice if it had slightly larger feet on the bottom to allow cool air in there.The case DOES support ATX PSU - If you can get a SF PSU go that way, my 850Watt SFX unit worked great and space starts to get tight with my 280mmradiator, 25mm thick 140mm fans, the PSU, motherboard, and 3x thick video card packed in.I went with the all mesh black version, no regrets there even though the glass looked sexy in photos the mesh is practical.

Compared to many others, this case takes takes the cake for accessibility and style. While not being the smallest case out there, this one does provide very good airflow, liquid cooling support, ATX psu support, and full sized gpus. Not only that it just looks very clean.I would recommend getting an fully modular SFX psu for the best cable management experience. Also keep in my Cpu cooler clearance as you may need a liquid cooler to support the higher temp cpus. Also be weary of lighting as too much lighting without good cable management will show up through the mesh.I waited a year for this case and have no regrets!

I bought this since I was downsizing my case from an mATX to and ITX. It's a really good case where I can fit a ATX PSU and a 3080 in it and I get no thermal throttling! It's about the size of an PS5 maybe a bit smaller. Overall, pleasantly surprised with what I can fit in this and how much airflow is actually possible!

Ordered 2 of these cases to do 2 builds for my kids. One came used as stated and other was new which was a pleasant surprise. No issues with the quality and no scratches or scuffs which was expected due to being used. May order another in white to replace my old case as the GPU overheats due to tempered glass side panel and not enough room to get proper airflow unless I take off the TG side panel.

Small, sleek, and simple design. This case makes maintenance, building, and plugging in your mITX build really simple. If you're a fan of plugging in tiny power cables to your mobo, this case has it. Aside from that, it's a sturdy case, and the panels are easily changeable with acrylic sheets so you'll have that glass look. I printed feet for it so that it'd be able to connect my current cables without buying 90 degree adapters.I bought the refurbished/returned one, and found one of the issues was the riser cable provided. Made the graphics intermittent, but I ended up buying a replacement cable and it worked just fine.

The construction quality and modularity of the design is great. Cable managing with stock cables is easy, if a bit untidy, but that only really matters if you use the tempered glass panel. Definitely recommend buying fan grills if you use an AIO with the fans configured to exhaust out through the radiator.

I purchased the full mesh gen 4 riser edition for my daughter's photo editing / music rig. Ryzen 7 5700x, 3070 and a pl240 flux aio. Temps barely hit 60 under load. Amazing case.

Exactly as advertised, did my research a nd found this at a low price as now it fluctuates.Great SFF case, customer support helped me find replacement 4.0 PCIE cable, as this comes with gen3.Only downside this model doesn't have led in power button.