HomallGaming Chair, Office Chair High Back Computer Chair Leather Desk Chair Racing Executive Ergonomic Adjustable Swivel Task Chair with Headrest and Lumbar Support (White)

I had one of these chairs for seven years and used it every day until the lift bar broke, preventing height adjustment. I loved it so much that I ordered the exact same chair again. It’s very easy to assemble, and I would recommend it over any IKEA computer chair any day. It can feel a bit stiff at first, but after a day or two of breaking it in, it fits like a glove. Good quality material overall considering how durable it was from the length of time I've had it before, 10/10!

I purchased two of these chairs for Christmas. One in black/white and one in pink/white.They were surprisingly easy to assemble. And are far more comfortable than they look. I love the reclining mechanism that works like a car seat. A little lever you pull to lay back, pull it again and the seat easily returns to an upright position. The pillows are comfortable but I feel the head pillow could stand to be a little bigger. They’re very sturdy as well. All in all I love these chairs and plan on buying another one.

Pretty solid chair. Very easy to assemble and reclines almost flat, which is amazing. Color looks good and it raises to a good height.I wish they didn't send a combo allen and phillip's head wrench, rather a double ended allen wrench and a screw driver. Assembly would have gone quicker with a normal, double headed, L shaped allen wrench.It only received 4 starts for the following physical negatives:1) The wheel base is too small and it sometimes feels as if it will tip over.2) Arm rests are not height adjustable.

My back was hurting from sitting for hours in a soft dining chair to do my work at the table. I decided to get a sturdier chair and one more ergonomically designed for spending a lot of time in it. This chair really did the trick. I wanted one of the lovely colors, but I got the black and white color because it was the cheapest. It is still very attractive and well designed. I have to comment on the ease of assembly. I am a senior female. The instructions were fairly clear but I had to rely on the illustrations because the parts were not labeled/lettered as in the instructions. I still had the chair together in about 40 minutes, first time and without error. The chair is sturdy, the castors roll easily. All mechanical parts are covered with smooth plastic covers. It is easy to adjust the angle of the back and the seat height. The lumbar support and the head support can be adjusted with the elastic straps The back adjusts from bolt upright to nearly parallel with the floor. The textured plastic arms are not padded which is my only criticism. I really dont use them and may actually remove them. The chair freely spins 360 degrees and it is easy to get in and out of it. The padding is firm, not hard. You do not sink into it, but it has enough give to be comfortable. I like to rest my feet on the legs instead of the floor. Although I have only been using it a week, I am already experiencing less pain from bad posture. At this point, I do not hesitate to recommend this chair. If I have any updates about function or longevity, I will update this review. I'm happy with my choice.

I consider this the best starter racing style gaming chair you can get. They are all about the same size, so if you're on the fence and want to try it out before dumping a lot of money on a chair, I think this is a 5 star chair for that.Overall I think these are also a bit better than the Amazon Basics mid-back or high back chairs, and I consider leather, even PU leather, much better to sit on than the mesh chairs that are popular. The problem with PU is it will always peel, there's no way around that, and it's only going to really last a few years. Mesh will last a bit longer maybe but isn't really that comfortable.The super expensive office chairs that I've had at work I don't think are at all worth it. But even if you think they are, they are just a lot more expensive.This chair is easy to put together, it takes about 20-30 minutes max and everything is easy to tighten with the included allen wrench. The covers you have to screw in, and I might recommend a regular screwdriver, especially for the deeper holes. There is no hole on the seat cushion for those cover screws, but you don't really need any since the screws are shallow and will screw into the brackets anyway.The chair does smell. Some of it is probably polyurethane and some of it is probably the off-gassing. I'm sure it will go away after a bit, but be prepared for that. Some of the surfaces are also a little dusty, but I used a simple multi-purpose cleaner spray and it came right off.Chair tilts a little backwards, but when you sit on it, it feels straight so I guess that's just how it's supposed to be. The back rest has a tilt/recline feature, which you activate with a lever on the right side almost exactly like a car seat does.The included lumbar and neck pillows are filled with some cheap cushion material and covered also in PU leather. The higher end chairs will give you velour covered memory foam. You can also buy those for $30-50 if you really want to as well.I would say if you like this style of chair, the next real upgrades are real grain leather and Napa leather options. That will set you back $500+ and $700+ and you can really only get them from Noble Chairs or Secretlab. I plan to do this for the Napa at some point, albeit they are out of stock, and chances are the price will get closer to $1k. I am not fully sure if those will last longer either, you might just be better off buying this chair every few years instead.As I wrote above, PU chairs are all pretty much the same. The material really doesn't change. They all seemingly use a nylon base, PU leather, steel frame and foam for the cushions. This chair says it uses a shaping sponge, while the others say they use cold cured foam. The cold cured foam maybe is a step above, and the velour with memory foam pillows probably are too, but I'm not sure that it's worth the $300+ most of the gaming racing chairs charge. I seriously think once you start going above this price point at $100-120 or so, the next upgrade has got to be in the upholstery, and nothing else really will matter as much.Overall I'd give this chair a solid 3 or 4, but for the right person it's a 5. That's the problem with the rating system, I don't know exactly what you personally are looking for. An inexpensive chair that will last a couple of years or more and is in this style, it's a 5 easily. If you're looking for really high quality, and it's just a step for you, maybe it's a 3 or 4. But at this price point I can't justify anything below 5 stars, so I give it a 5, and I urge people that want to try this style out to seriously consider grabbing this one first, if they can't test out a higher priced chair for awhile and don't feel comfortable just dropping a higher price amount without testing something.Edit 1 Week: Smell was really terrible for the first 2-3 days, but then faded and is fine/gone now. Might not be a bad idea to let this air out a few days somewhere.The arms got wobbly and I had to re-tighten the bolts. I had to do this two times. Not sure if this will be a continuing issue or not.I'm still undecided whether I will stick with this or go for a better leather version. I really don't want to get another PU version, so for that I'll probably stick with this. But if I see a good deal on the real leather and napa leather options I'm leaning towards getting that, and giving this one to someone else as a gift.

Easy installation! Great directions! Very Comfortable! Buy it!