FIRSTINFO A1132NUS Patented 6 Liter 14 Pcs Taiwan-ATF Filler Adapters | Pneumatic Transmission Fluid Dispenser Pump | Hanging Hook | 360° Z-Swivel Air Fitting | Spring Structure Hose

Must have if you work on cars. This tool is awesome and comes with plenty of adapters. Mine developed a leak, messaged seller and the seller was quick to respond with a fix (new unit). Overall great service. Would 100% buy again.

Easy to use and was surprised by how well it was made. Perfsize for all three cars (minvan, surprised and sedan). Really easy to fill to the desired amount and only 1-2 pumps for a full transmission.Hard to find a critique other than documentation for an approved cleaning procedure but had 0 issues with the normal Dawn and water approach.Definitely recommend

I purchased this tool to do a drain and fill on my Porsche Panamera PDK transmission which would save me a boatload of money. It came with a good variety of adapters and hoses to get the job done. The adapters are made of metal which is a real plus. It seems to move oils and other liquids in or out at a decent rate. Not too fast or too slow. It also seems to be well built with good quality materials. One issue is the cap is purposely and unnecessarily screwed on and torqued down so tight that it can't be removed by hand. The problem is if you extract dirty oil with it, you need to clean the inside and dry it out before you go back with clean fresh oil. That's very hard to do if you can't even take the lid off. Because its much easier to clean and dry it out if you can take the cap off. I had to use a bench clamp to get the cap off. The thing works perfectly fine with the lid hand tight. I don't understand why in the world they make it impossible to twist the cap off by hand. Next issue is, I tested it with air pressure when it first arrived. It would not hold any air pressure for more than a few seconds. I thought it was defective. But after I tried it in the field it worked fine. I guess its really not supposed to hold pressure. It seems to just let pressure build and constantly seep out as long as the black handle trigger is locked. This means your air compressor will constantly be blowing air through it trying to keep the pressure up in the bottle. The next issue is the claim that it can hold 10 liters. I believe it's more like 9.5 liters. It's got a line on the bottle for every liter. I tested it by pouring in 10 one liter bottles of oil in it at room temperature and it could only hold 9.5 liters filled it all the way to the rim. I guess they just call it 10 liters by rounding it up to 10. I guess this is fine if you only need a 9.5 liter oil dispenser. That's the only reason I gave it 4 stars instead of 5. I do wish they made it out of a clear acrylic or clear plastic but overall I'm very satisfied with it. I don't know the longevity or the reliability of it because I've only used it once and I probably won't use it no more than 1 or 2 times a year. The warranty will probably be long gone by the time I use it again but as of today I would highly recommend it as long as you have no problem with the issues I've mentioned.

this has been a life saver for me. As a professional mechanic I use this multiple times a day. works great and is pretty quick to fill a transmission or differential. a little pricy but at least it gets the job done

Works great, for thicker 80/90 gear oil, I just heated in hot water in a bucket, thins out the oil, flows easier.

This is a great tool for fluid extraction or replacement, I have an auto repair shop and car companies make changing transmission fluid a big PAIN in the ass, this tool is fantastic, lots of adaptors to fit most vehicles. Also it’s great quality, wish I had bought one sooner 😎

It seemed capable, but a little bit frustrating sometimes; I found that instead of simply allowing the tank to pressurize to 43PSI, the unit consumes air just as fast on Dispense mode as it does on Extract mode- which is a good amount of consumption. It similarly doesn't allow vacuum pressure to build as an automatic/manual type would, so it's ALWAYS using air- you can't pressurize the bottle, and just let it extract or dispense until the pressure is gone.I've only used it for ATF+4, which is fairly flowable, but seemed to be a bit slow... maybe it's me, but it felt like it took almost 8 minutes to pull out 6L.Anyway, it does seem fairly well built- the plastic castings seem sturdy, the connections don't leak, and it does extract and dispense the fluids I bought it for- I wish it had included a brake bleeder connector, because that's a pretty common use for these, and for the price it would be a tiny bit of loss for the manufacturer- especially because they make the silicon casting for the bleeder connection already.I'd get another, but only if absolutely necessary that I have something to perform this function.

I like this thing a lot. I got the 10L and will be using this strictly to fill atf. I’m going to buy another one and try it for gear oil.

Fast shipper, as described, highly recommend.

Buen producto pero caro

まだ使用していませんかクオリティは思ったより良かったです。よく出回っている5万円位のと質感はあまり変わらない様な気がします。金具の感じも安い中華製になる様なペラペラ感は無くしっかりした感じです。エアーメーターもまーまー普通ジョイント類も国産には敵わないですが使えそうです。分解展開図と商品パンフレット、車種別アダプター説明の紙切れしか無いから簡単な説明書があっても良いとと思います。わかる人前提に販売している感じでしょうか。手軽な金額で買い易くなったのは嬉しいですね。オートマチェンジャーもありますが機械自体も大きくレベルが無い外車などはアダプター付けてしていましたが途中抜けたりオイルが漏れたりして床が汚れますがコレなら専用のアダプターですので床にオイル撒いたりする心配が少なくなるかも知れませんね。

W204後期のATF交換に使用しましたが問題無く使えました。個人利用で使用頻度が少ないとコスパ悪いです…ヤフオクで格安レンタルしたら需要あるかな？

W204のATF交換に使用