Linenspa Memory Foam Mattress Topper, Twin XL Size - 2 Inch Gel Infused Memory Foam - Plush Feel - Cooling and Pressure Relieving - CertiPUR Certified - Dorm Room Essentials

I once bought a used twin size innerspring mattress on Craigslist for $100 and used that to replace the flimsy mattress that was on a hospital bed. It was comfortable. I would throw myself onto the mattress (sitting down position) and I would sleep comfortably and very well each night. But after 8-9 years, I started having severe back problems. I then threw away the mattress and the hospital bed. I then slept on the floor on a 3' x 6' yoga mat for a while. Then I bought a tall, metal, folding bed frame and I put the yoga mat on top of that. I thought the yoga mat was a good idea because it was near impossible to find any innerspring mattresses, and the ones that were in my price range looked like they would be terrible and bad for my back. I also did not have any confidence in hybrid mattresses and thought they would not offer enough support for my back. So even though the yoga mat was hard and uncomfortable, I thought that it was doable. I thought that I could also do some yoga mat exercises in bed. But I eventually gave up on the yoga mat exercises in bed and now I only do yoga mat exercises on a different yoga mat on the floor during the day. Eventually, I did get a twin size hybrid mattress, but there were some problems with it. One, it felt too soft and was a bit uncomfortable. And the edges did not have any support, despite having firmer foam in that area, so anytime I sat on the edge, I would slide right off. Also the thick hybrid mattress, despite being the thinnest one available made my bed too high. So I sold the mattress a day later and went back to using the yoga mat on the bed frame. But it oftentimes was a slow and painful process getting in and out of bed because of back and body aches. Lying on my side was painful on my left shoulder because I damaged my collarbone around 9 years ago. And sometimes, not often, my back would go out of alignment. So for a long time, I wondered what I should do. Should I get rid of the bed frame and get a shorter one and then get the twin size hybrid again? But I didn't want to do that. Should I get a down mattress topper? Should I get one of those mattress toppers that are mostly just cheap foam with only a one inch layer of memory foam on top? Or should I get a mattress topper that is 100% memory foam, like this one? Also, how thick should I get it? I never trusted memory foam. I felt like it would be a weird feeling having my body parts sink into the foam like that. But I decided to give it a try and I ordered a 3" memory foam mattress topper for $70 and it's been worth it. The sinking feeling doesn't bother me at all. In fact, it is a good thing because it puts my body in a more natural position instead of putting pressure on a lot of body parts. It's 100% comfortable getting in and out of bed now. I can now lie on my left side without my shoulder hurting. I can now sleep on my back, side, or stomach comfortable. I sleep better. I haven't had any back problems, and my back is recovering from my previous misalignment fast. And I haven't had any problems with heat retention in the mattress topper and my apartment temperature is usually 82 F in the winter time. So overall, very happy. I am tempted to believe that this memory foam topper on wooden planks would be better than a hybrid mattress because hybrid mattresses consist of a lot of cheap layers of foam that wear out fast and are just unnecessary fluff, whereas the memory foam is all one really needs I think. Also, my hybrid mattress I bought weighed like 250 lbs (exaggerating), but the memory foam topper and the yoga mat I am using underneath it (instead of wood planks) is so light and easy to move. I like that. I hate lifting or dragging around really heavy mattresses when I have a bad back from a roofing accident that I was in. And now I don't need to buy a shorter bed frame as the mattress topper didn't add a lot of height. UPDATE: It's been 10 days and I've been in pure heaven each and every day. I don't think I will ever have back problems again and even if I get back problems they will probably be solved as soon as I sleep on this memory foam mattress topper. UPDATE: It's been almost half a year, and I never slept on anything so comfortable in my life. It's so great. I want to use this for the rest of my life. I like it better than actual mattresses.

Ladies and Gentlemen, LEND ME YOUR EARS. I do NOT want to sell you this product. I have some basic advice that can make it work like a dream. Sellers are motivated by profits so they're never going to tell you the key factor that determines whether this item is a good fit for you. The short version goes like this; If your mattress is saggy, worn, with dead springs then this topper WILL NOT HELP, it will MAKE THINGS WORSE! If you have a firm mattress and are looking for something to add support, it is a DREAM. I began this process with a worn out mattress. So I will share what happened below. At first, I was deeply disappointed to the point of anger. I wanted a FIRM mattress topper to make up for a sagging mattress. I also sleep hot and was counting on the "cooling gel" (or however they market this as reducing heat). Without a cover it's an insulator. As soon as I let it rise and air out, I installed it under a cotton sheet. I laid on the topper and it really felt like a pleasant cloud and it was cool. It was not the firm sensation I sought but I liked it. 15 minutes later and I noticed I was sinking deeper into the mattress than before. Then coolness rapidly turned into a heat trap! It must have similar material as wet suits as my body heat and moisture began to heat the material. Now, I was furious. As I became increasingly frustrated my body got warmer and warmer. All I could think about was "the reviews MUST have been bots!" I also dreaded the hassle of returning it due to the way it's packed etc. I spent hours the next day after a poor night's sleep looking for a Queen mattress under $350 that was extra firm but I didn't trust any of the reviews. I did remember reading one 5-Star review for this product (here) that I believe is up near the top in rankings due to its helpfulness. The person explains this exact point I'm trying to make very clearly. I'm trying drill this point home so you don't make the mistake I made. At one point I remembered that there was firmer queen mattress in my guest room. So I swapped the mattresses and placed the topper. Thats when my frustrations made a full 180°. It may be essential for one to purchase a special cover for this pad that provides a layer for air exchange so that it cools. In my case, a fine sheepskin blanket provided satisfactory airflow to negate the heating effect produced when the body's warmth is trapped in this material. I'm writing the review from the bed. It's ridiculously comfortable. I don't want to get up. Yet, please folks, understand it WILL NOT work to transform a soft mattress into a firm one. Don't make that mistake or you'll be so frustrated you won't have the energy to leave a negative review. You'll make your situation much worse! You'll also miss out on the chance to experience the effect when this product does work which is deserving of all the superlatives in the reviews. I didn't try this but the 3" is dense enough I suspect that placing it atop the box spring would have been better than trying to make it work in with my old worn out mattress. If you can afford to get a very basic firm queen mattress or swap one from your home then this can work. If not, just find a new mattress. There's no method I'm aware of to ressurect a bed where the springs are toast. I'm tall, muscular and heavy as lead. I have a fast metabolism and exercise often. I need a firm and supportive bed that's cool. If one takes a moment to consider that we sleep roughly half our lives, and that so much of our health is contingent on the quality of sleep we get, this is one of the few things money can buy to make a meaningful difference in your quality of life. Not necessarily "this" exact product. I'm sure there are products with far better design and materials where the effect ultimately supports multiple body frames perfectly. Perhaps there is a mattress topper that will work on a flimsy mattress just NOT this one. Yet the potential options I've found are expensive. I'm taking the time to write this to potentially save YOU time and frustration. I'll circle around to the top. I honestly think a piece of plywood would suffice over putting this on a saggy mattress. It DOES add additional support to the contours of the body IF you have a firm underlying foundation.

This is what we have been looking for. My wife and I purchased a new mattress recently, which proved more firm than medium firm, so we needed something soft for a topper. As we are both side sleepers I opted for the three inch thickness. She sleeps well and we fall asleep quickly. Children and pets have a more difficult time waking us up, now. lol The material is cooling gel foam, of good quality, nice and thick. You may wipe it down, if needed for spills, but washing in a machine is out. We put a mattress topper cover over it to help protect it. It swelled quickly to the size of a queen sized mattress. It offers a gentle support, soft and forms around you without making you feel as though you were wallowing in the foam or struggling to get up and out of bed.

A partir de 2018, existen numerosas quejas de que los sobrcolchones de 3 "son demasiado suaves. Ahora tengo una muy buena idea de por qué. La versión California King de este sobrecolchón de 3 pulgadas es mucho, mucho más suave de lo que solía ser, y he aquí por qué. La densidad es menos del 85% de lo que solía ser. El peso es 8.07 Kg / 17.8 # en lugar de los 9.53 Kg / 21 libras especificados. Eso significa que ahora se puede hacer 23.5 por el costo de material de 20. Como la mayoría de los vendedores de toppers no publican densidades de espuma (Amazon debería hacerlo obligatorio) La única forma de obtener una pista es el peso del sobrecolchon. Cuando el vendedor miente o no actualiza el peso, esto hace que sea imposible saber lo que está recibiendo. Algunos vendedores solo dan el peso del envío haciendo que las comparaciones sean totalmente imposibles. La mayoría de los sitios de revisión son simplemente chelines para las marcas que reciben comisiones por vender, por lo que es inútil. Algunos son útiles, pero ¿cuáles? Con un artículo como este, las opiniones individuales de comodidad significan poco, ya que el cuerpo de cada persona es diferente, por lo que las reseñas aquí son inútiles en gran medida. Si pesa 100 Kg, 1.6 M y duerme de lado, probablemente necesitará un topper mucho más denso que una persona de 70 Kg, 1.6 M y duerma boca arriba. Muchas variables deben tenerse en cuenta. Hay sitios que le darán una buena idea de cuán denso necesita un colchón, pero dado que los vendedores no le dicen que esos sitios son inútiles hasta que encuentre un adorno que funcione para usted y calcule la densidad. Los sobrecolchones fabricas ​​en látex son diferentes a estos y deben compararse por separado. Pese su topper cuando lo reciba y, si es más del 5% más ligero que lo especificado, ENVÍE DEVUELTO. Cuando los vendedores se den cuenta, tal vez comenzarán a poner números de densidad en las listas de productos. La única compañía que noté que era transparente es Millard, aunque debe haber otras. ANTES de realizar el pedido, pregunte al vendedor sobre la densidad de sus toppers y, si no proporciona una respuesta de compra en otro lugar, y deje una REVISIÓN NEGATIVA diciendo que el vendedor no le dirá Compré un 2.5 "Cal King de Lucid y pesa 22.3 libras. Eso es bueno para mí a 1.8.M, 103Kg. Eso es un 50% más denso y cuesta menos de lo que me costó este topper. 22.3 / 1.78 * 6/5 = 1.503 Este topper es normalmente de 3919 pesos, que definitivamente es un valor pobre. A las 1638, que pagué, sería un buen valor SI como se describe. NO, PERO lo cortaré por la mitad y lo usaré para mis hijos de 8 y 4 años y compraré un adorno de buena calidad para mi hijo de 15 años. NO será un producto de Linenspa. Ya no confío en la empresa. Tú tampoco deberías.

Muy suave, la tuve que cortar un poco para adaptar a mi cama, no quería pero era necesario, me ha ayudado con el dolor de espalda ya que mi colchón es muy rígido, aunque aveces te hundes tanto que parece que la esponja te succiona, tal vez la pedí muy gruesa

Great

Si cuesta menos de $1700, sí cómpralo. A mí me costó 1475. Estuve leyendo reseñas en donde decía que no se inflaba o que se quedaba aplastado de ciertos lados, sin embargo, necesita una habitación cálida y sin humedad para poder inflarse. Lo que hice fue ponerlo en una habitación donde hubiera sol y con un calentador. Siento que sí aceleró el proceso pues cuando lo puse en una habitación fría no avanzaba, ahora han pasado 24 horas y ya está al 95% inflado, ya pude dormir en él. También con mucho cuidado fui levantando la espuma y se aceleró un poco más. Te recomiendo que antes de abrir el colchón revises que no huela humedad, si tiene, entonces no se va a inflar. La textura está bien, pedí el de 7.5 cm y sí está muy esponjoso, vivo en un lugar frío así que viene estupendo que guarde tanto calor pero en lugares cálidos puede que no sea ideal. Primera noche: - Se siente como una nube - Parece una nube - La cama es más alta (las sábanas deben ser de ancho extra) - Las almohadas blandas ahora son demasiado blandas, y las memory foam son muy rígidas comparadas al sobrecolchón - Se queda marcada la espuma, y tarda como 10 segundos en retomar forma, al inicio sentía que no te puedes mover tan libremente - Si te mueves mucho se puede desplazar unos centímetros, pero nada exagerado - Los pies están extrañamente más cómodos - Dormir de lado es un SUEÑO, ya no hay dolor de hombros - Las caderas se hunden demasiado, parece que estás durmiendo sentado Es cuestión de acostumbrarse, tal vez el de 5cm sea mejor opción, pero yo estoy adaptándome y me agrada. Este sobre colchón no arregla el problema de hundimiento de colchones, te recomiendo poner de lado tu colchón y agitarlo para intentar darle la forma y ya después colocar esto. También te recomiendo que le pongas un protector de colchón Porque el sudor puede que haga que se torne amarillo con el tiempo. Las medidas son exactas a la cama matrimonial. Yo elegí este porque aquellos que tienen textura he visto que se rompen mucho, y si te mueves mucho durmiendo, mejor elige este. Actualización: Llevo 2 meses con él y me han dicho que es demasiado cómodo, él único problema es que cuesta reacomodarte un poco, pero por su comodidad ni te mueves. También se contrae del lado largo por alguna razón, no me es problema pero está raro

I’ve had this pad for almost a week now, and so far it has made a huge difference for us. It arrived in a small box and, to my surprise, fully expanded in about 30 minutes. There was a noticeable smell when I first opened it, but it wasn’t anything unpleasant, just the usual scent you’d expect from a new foam product, and it faded pretty quickly. Both my husband and I have neck issues and scoliosis, so finding something comfortable and supportive has been really important for us. Since adding this pad to our bed, our sleep has improved so much. We’re both waking up with less stiffness and fewer aches, especially in our necks and backs. The pad adds the perfect mix of softness and support, and we could feel the difference almost immediately. One thing I do recommend is getting sheet clips or using larger sheets, because the pad adds quite a bit of height to the bed and regular fitted sheets can slip off more easily. Overall, I’m really happy with this purchase. The comfort improvement was immediate, it expanded quickly, and even with the initial smell, the benefits definitely outweigh that small inconvenience especially for anyone dealing with chronic pain or spine issues like we do. Will update if anything changes :)