Next Level Racing Wheel Stand 2.0

Quality item and very sturdy. Easy to assemble and plenty of mounting options.I was previously using a Fanatec CSL DD via a desk mount and although I thought my desk was pretty sturdy, it was nothing compared to using the wheel via this NLR Wheelstand. There is no sooo much more detail and nuance in the FFB and I find myself catching slides and spins much more easily than I did previously.Having a solid deck for the pedals is also much better and provides much better feeling that you are connected.Via the desk mount I also found FFB would generate noise (creaks from the fanatec desk clamp and also my desk) as well as jiggling my desk and monitor. Now the Wheelstand is no longer connected to desk and therefore monitor, everything feels more stable and quiet when racing.It's also very handy having one unit that all the gear is mounted to in terms of getting ready to race. Previously it took upto 10min to get everything out and connected and in position ready to race. Now setup is a breeze and makes it more likely I'll do some racing.Can't recommend highly enough and it's made much more of an upgrade than I was expecting. Also really good value given the quality I would say.

I bought this item as I am getting more into racing sims. Nothing is worse than trying to keep up a competitive pace only to have the pedal box move out of alignment, or the clamps holding the wheel not being quite as secure as you might like. Being completely honest this one was more expensive than I ideally wanted to spend, but having the ability to lock my office chair into the frame using the front casters sealed the deal.First off I will say, this is a HEAVY unit, rock solid construction but not something that is all that easy to move. It is not impossible by any means but smaller folks may need help. I will be moving mine quite regularly from a deployed position in front of my PC to folded away against the wall. Not a reason not to buy, but something to be aware of.The packaging was good with a comprehensive set of instructions to build the unit. If buying, take the time to check, check and check again that you are assembling everything the right way around, the plate that the pedal box mounts to in particular. The unit comes partially assembled and you get all the bolts, allan keys etc that you need to do so. I took the time to attach the wheel and pedals to their respective mounting plates so that I could get a better feel for the height of the wheel, angle of the pedals etc. This isn't something referenced in the instruction booklet but I would recommend it.OK so enough of the pre-amble Snowy, you are saying I am sure, what about using it? With the unit set up and F1 2023 running on my gaming PC, I gave the new setup a try.If you use a pedal-box on the floor, you will know about movement there no matter how good the carpet grips may be., especially using more modern pedal boxes with higher resistance on the brakes. What I hadn't appreciated though is how much I had held back from aggressive steering inputs with the wheel clamped onto my desk. With my wheel and pedals (Logitech G920) bolted physically to the frame, there is absolutely zero movement.Mounted to the stand, the wheel and pedals now feel like the are attached to the body of a car, there is no flex, no movement at all that you can apply that will cause any kind of movement to the frame. This lets you stomp on the brakes, wrench the wheel to catch a slide, and everything just stays true and solid. I don't have space for a full cockpit setup (seat etc) but if I want to expand the setup down the ways, the Next Level Racing kit will allow me to do so without having to buy a whole new unit. Equally it provides me with the perfect mid-point that matches my needs and available space - I have a much better sim racing rig now with the added bonus of being able to fold it and move it aside when not in use.Very happy customer, would recommend Next Level Racing products based on this experience. Well made, well engineered, good instructions for the assembly and well packaged.

The first thing to know is - it's very heavy. Too heavy to be lugging about. I fitted two small castors to the front, all you need is a pair of small castors with an 8mm tread that will screw into the frame. The threaded holes are already in the frame.I'm using it with a Fanatec GT DD pro 8nm and the CSL elite V2 pedals. I use it on a couch so I have to use a strut to stop the frame from being pushed forward when I'm using it. With the V2 pedals I'm applying a lot of force.Gotta say it's a very good quality frame, well designed and comes with plenty of bolts. With other stands you would have to go to the hardware store for more bolts. There is absolutely no flex using the 8nm DD pro. This stand is for someone who hasn't the space for a full racing rig. It's the next best thing. If you were using pedals that didn't have a load cell you wouldn't need a strut because it wouldn't move.I think it's the best racing stand on the market. It'd probably handle anything up to 12nm maybe even 15nm

This is a very sturdy & practical stand to mount racing wheels, pedals & handbrake/gear shifters.I'm using this for the Moza R5 with TSW Truck Wheel, Truck Wheel Mount Bracket & SRP-Lite pedals with brake performance upgrade. Conveniently folds with the pedals & steering intact.Its very heavy though, and even folded it takes up a bit of space, so make sure you can store it somewhere when not using it (too heavy to store anywhere except on the floor)

It was nice to put together, easy to fold away but heavy as expected. Would recommend installing shifter bracket to the frame and then join the shifter mount after as it's quite tricky to get it in place.