Master Airscrew Stealth Propellers for DJI Mini 2, Mini 2 SE, Mini SE & Mini 4K - Red, 4 propellers in set

My first set induced a vibration into the video (jello/jelly effect) even at slow speeds but not at hover. After speaking with MAS excellent customer service team they guessed it might be an issue with one of the blades. Presumably a slight shaping issue as none looked damaged. They do have the occasional flake like moulding marks but was assured this doesn't effect the function. After carefully feeling for vibration it seemed the issue was front left. MAS gave me a replacement and sure enough the vibration went away. As for performance - Are they quieter? Not sure. Do they seem quiter? Yes! There's a difference in pitch (or is it tone or timbre?) that is more comfortable for me and I seem to lose the sound quicker at altitude and distance. Less whiny. Oh and in case you're unsure, the colour orange at least is solid orange, the white is the reflection from a flash/light source. I assume the other colours are the same. As for visibility, I don't think they'll make much difference to black but at least if it was hovering head height or idling on a table, it's easier to see them spinning for whatever reason. Would buy again and recommend giving them a go, sound is subjective but worth a try

The noise from these propellers is less like the angry bee noise created by the originals. The flight performance on a breezy and gusty day was also more predictable and appeared more stable. Following a slight packing error, the company in California resolved the issue immediately and without a quibble. Very impressive Customer Support.

More a different noise than the standard props and less annoying / noticeable. However don't expect a dramatic drop in decibels. Seem well made with a choice of colours which helps to see / identify your drone in flight. However I did need to do a very little careful hand finishing around the holes on two of the props that did not rotate freely around the mounting screw when fitted. As the original DJI ones all did rotate freely I thought this important to do. It was binding on the motor ring not the screw shaft and needed some small moulding "nibbs" fettled away.

I'm fairly sure I have reviewed these already, but anyway here it is again : I like them so much that I bought a second set so that if I damage any in flight I have spares to replace them immediately. The colour makes the drone easier to see and they also seem to be quieter than the originals.

I've been contemplating buying some of these Master Airscrew props for some time and just decided to bite the bullet yesterday. They look fantastic and, once correctly fitted (see comments below), they do produce a different, more pleasant tone. The red colour that I chose also looks better for VLOS. 5 stars for the blades alone, but 1 star (0 if I could) for the screws. Despite the screws being the same dimensions as the stock DJI ones, they are of a poor quality. After installing the props initially, I wasn't overly happy with how the screws did up. They don't screw in as comfortably as the stock ones. My initial flight was a little noisier, albeit a different tone. It was only when I re-examined them that I discovered each motor had 1 half prop sitting at a slightly lower angle than the other. Probably 5 degrees difference, if that. Unscrewing them, it was evident that they have a slight kink in them. Having removed them, refitted the original DJI screws and put a tiny drop of thread lock on (a very tiny amount is all that's needed) they all screwed on perfectly straight. My test flight was perfect now, with a decidedly quieter and more pleasant tone in flight. There is clearly an issues with the screws that Master Airscrew include. I could have sent them back, but was happy with the fit once the DJI ones were used. Many won't have lock thread at home though, so you may want to consider using new DJI screws instead. To be fair though, they'll probably be fine without thread lock, but it was for my own peace of mind. Definitely recommended as props, but don't go near the screws. Update...I've uploaded a macro photo (sorry Bout the poor quality) of one of the screws. You can clearly see that the thread isn't straight in line with the rest of the screw.

just that little bit quieter than standard.

Easy to fit and a slightly different noise from the originals, not less noise, just different and not so noticeable. The props also feel much less brittle and have slightly more flex in them which I think is a good thing. Colour goes great with new dayglo orange skin but that's subjective. Can't say I have noticed any difference in flying characteristics or battery life yet.

Poor quality ,very very easy to break,they do make it abit quieter but break and shatter with very little contact,so save your money and buy the cheap 1s,i got 4 full sets with screwdrivers and bolts and even spares bolts for less than 1 set of these and they are just as quiet and better qaulity

Primer vuelo superado, con bastante viento. Yo creo que bien. 100km volando y aún no las he cambiado...

Easy install. Better than OEM props.

Die Propeller wurden bestellt, weil die Originalen nirgends lieferbar waren. Ich muss gestehen, dass ich etwas Bedenken hatte, aber restlos überzeugt und eines Besseren wurde. Über die Optik und Farbe kann man streiten. Das steht hier auch nicht wirklich im Vordergrund. Die Montage ist einfach über eine der mitgelieferten mit bereits aufgebrachter Schraubensicherung Schrauben pro Propeller zu erledigen. Der erste Testflug war erfolgreich, sodass weitere Flüge gestartet wurden. Der Klang hat sich etwas verändert. Ob die DJI Mini 2 dadurch wirklich leiser wurde, kann ich nicht beurteilen. Die Flugdauer hat sich auch nicht wirklich merklich verändert. Alles in allem kann man diese Propeller bedenkenlos empfehlen.

Może trochę inaczej brzmią.Czy cichsze trudno powiedzieć . Ale napewno fajnie wyglądają:)

Me gusta el color en combinación con mi drone , el team del ruido en realidad no es notable la diferencia pero se ve muy bien