Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Vanuatu.
🔑 Unlock hassle-free driving with MechanMagic — your key to effortless access!
The MechanMagic Key Fob Replacement is a fully assembled, battery-included remote compatible with a broad range of Chrysler, Dodge, and Jeep vehicles (2005-2014). Operating at 315 MHz, it supports 4-button keyless entry and allows DIY programming with two original keys, offering a cost-effective, reliable alternative to dealership replacements.
| ASIN | B09KXXHNJ5 |
| Additional Features | Lightweight |
| Battery Type | Lithium Coin Cell |
| Best Sellers Rank | #43,384 in Automotive ( See Top 100 in Automotive ) #237 in Keyless Entry Systems |
| Brand | MechanMagic |
| Button Quantity | 4 |
| Color | Black |
| Compatible Devices | Chrysler, Dodge, Jeep vehicles |
| Connectivity Technology | Radio Frequency |
| Controller Type | Button Control |
| Customer Reviews | 4.3 4.3 out of 5 stars (361) |
| Manufacturer | MechanMagic |
| Maximum Number of Supported Devices | 1 |
| Maximum Range | 6 Feet |
| Mfr Part Number | for FCC OHT692427AA OHT692713AA |
| Model Name | flip key |
| Model Number | Chrysler+flip key |
| Number of Batteries | 1 CR2032 batteries required. (included) |
| UPC | 758277712392 |
S**B
Great! -Instructions @ end to program
Manual instructions at the end of review. We have a 2006 Dodge Durango that needed some new remotes. These remotes work great, but it took some googling to figure out how to program them without calling out a professional or taking an hour and a half trip to the nearest Dodge dealership or purchasing other equipment to program it. I wasn't thrilled about adding more time or cost to something I hoped would be a simple diy. I grew concerned when several of the "easy" programing searches didn't work. The last one I found was completely different from the others and it said I had to have 2 working remotes. When I'd found the instructions that ended up working, it wasn't until 11:30pm and I'd already been out in the evening avoiding the heat trying to program the remotes. The other instructions said to close the car doors and at 113 degrees during the daytime, I waited until night to try. The final instructions said I had to have at least 2 working remotes to program. Only one of mine was fully functional. I had to wait until the morning to try and get 2 working. I managed get a non working one to work "enough", by soldering the damaged part for the battery back on. The unlock button still didn't work, but I was hopeful it was functional enough to qualify as a second working fob. Luckily it did. I don't know if this will work for every car that uses this fob, but this did work for our 2006 Dodge Durango... I don't know if my review can include the web address for the keyless entry remote inc page I found it on, so I'll just share the instructions. BTW it says you can only have 3 programmed remotes, but it did program both of these new fobs and my other 2 original all still work. **This procedure CAN ONLY be used on vehicles built in USA. **You MUST HAVE two working programmed Remote/keys before you can add a third remote/key. **If you only have ONE WORKING REMOTE/KEY and want to add a second key this procedure WILL NOT WORK. 1. Using first programmed remote/key turn ignition to the ON position for 5 seconds. (Do not crank engine). Turn remote/key off and remove. 2. Within 5 seconds insert second working programmed remote/key. Turn ignition to the ON position (Do not crank engine) security light will begin to flash and chime will be heard within 10 seconds. Turn remote/key off and remove. NOTE: Some vehicles will not chime, only the security light will flash. 3. Within 5 seconds insert third NEW CUT remote/key and turn ignition to the ON position (Do not crank engine). The security light should start flashing and within 10 seconds you should hear a chime and the security light should go out. Once the security light goes out, the new remote/key should be programmed. Turn remote/key to the OFF position, remove key. 4. Test key and remote.
J**E
Worked perfectly once programmed
Worked great for my car. I’m thankful I have a friend who’s a local locksmith, so I was able to get these programmed for next to nothing. Once programmed, they worked perfectly with no issues. A solid replacement option if you have access to programming.
S**S
perfect buy
perfect buy. was easily programmed and works perfect. the price is great also. didnt have to spend a fortune having a dealer program them.
J**A
Ok
Ok
W**E
Great product
Worked perfectly
J**N
Fobs were easily programmable by a pro like me.
Professional here, these programmed perfectly, fobs work well.
I**3
Terrible product
One fob was programmed easily but stopped working after a couple months! The second fob wouldn’t even program.
E**E
They worked perfectly surprisingly
works perfectly for my 2006 Jeep Grand Cherokee and if you go to Ace hardware they'll do it for you cheaper than a regular locksmith I was kind of surprised to be honest with you that they work so well but all the buttons worked and all the keys that I ordered worked
A**M
After long investigation, this key frequency is different than the original key means it's not possible to program it
S**C
Very great cost compared to buying in local locksmiths or hardware stores. Works great after getting cut and programmed for my Jeep Liberty.
Trustpilot
3 weeks ago
1 month ago