Grab On Grips Grip Cover - Fits From 1.25in. to 1.45in. OD - 5in.L, Color Black MC402

Llega lo publicado, en tiempo y forma.

A must have! Excellent. Great to soften grip and reduce vibrations/fatigue. Easy to install with compressed air. No mess! Stick the end over the bar a bit and then blast inside the open end with an air gun while holding that end closed over the gun. They’ll float right over the grip. To readjust position, just stick the end of the nozzle under the edge of the grip and blast it with air. No soap, water, hairspray or windex needed! For some reason, the price has doubled on these from what I originally paid ($18).

I bought these for my 2018 Honda PCX150. I love them . They offer a very comfortable improvement over the small and rather hard OEM grips . I've logged about 150 miles on my scooter since installing them and I'm 100% satisfied with the vibration dampening these offer.If you're bothered by vibration like I am , I strongly recommend giving these a try. I doubt I could ride for extended periods like I do without these .Installation is easy . I filled a small bowl with warm water & then kept adding Dawn dish soap till it became a very slippery solution . Then I just used my fingers to apply the soapy water to the factory grip surface AND the inner surface of the Grab - On covers. Quickly , I slid the new grip cover over the end of the factory grips and used a slight twisting / pushing motion to land them to their permanent location . Obviously I repeated this procedure for the other side. Though being very tight and feeling secure , I left these set up overnight for about 12 hours to allow the soapy water solution to dry.Remember these are sponge foam , be careful installing them so you don't tear them. Be prepared to work quickly once lubing these for installation .I'll absolutely buy these again once I wear mine out .Thanks , Sean

I tried grip puppies but found they made the grips uncomfortably thick. These are a bit thinner and easier to install and for my hands the resulting grip diameter is just right. Installed easily enough on z900rs factory heated grips.

Awesome product. My handgrips were just hard rubber on the bars, so my old arthritic hands felt all the engine vibrations of my Bully. Mounting these was mildly difficult (but not the hardest grips I've done) due to my grips being at the biggest of this products size range.After the install, I have done over 1000 km with zero hand pain and the grips are a bit bigger which suits my large hands better. The grips have not moved or shifted. I don't feel the vibrations with my hands at all. I would highly recommend these grips. These along with throttle lock and grip paddle - will make long trips even more enjoyable.